Tenergy Universal RC Battery Charger for NiMH/NiCd 6V-12V Battery Packs, Fast Charger for RC Car, Airsoft Batteries, Compatible with Standard Size Tamiya/Mini Tamiya/Alligator Clips Connectors 01025

I bought an adapter with this, and 2 new traxxas end batteries. The charger is great value, works well for my set up and seems durable. 10/10!

Trabaja perfecto, con todo tipo de conexiones para diferentes usos.

A basic budget charger for NIMH or Nicad battery packs, works good and gets the job done. To the person that almost burnt their house down, you tried to charge a Lipo battery with a NIMH charger!!! Wow you have no clue what you are doing and should not own Lipo batteries! Lipo require a totally different charger that accept the balance wire. Research before you buy and use stuff you have no clue about.

I bought a new airsoft marker and I needed a nice charger to charge its battery. This one was recommended by a friend and I couldn't be happier! this charger was able to satisfy all of my needs with its safety features and quick charging capabilities.Pros;✔️ The charing is as quick as can be, it charges my 2150mAh (around) battery in about 4-6 hours and auto shuts off when it's done.✔️ Really simple to use, the instructions included are great and help a lot!✔️ The safety features are the best of its kind for the price with auto shut off when it's done, heat sensor and 2 different charging modes.Cons;❌ None! This is a perfect charger!In conclusion, this is a perfect charger and has absolutely no competition on Amazon and is a no-brainer for any NiMH/NiCd batteries!

The seller was Battery Superstore. I paid 15 bucks.It included the following connector adapter cables, but I don't use them:* one standard female Tamiya to alligator clips* one standard female Tamiya to small/mini male TamiyaI am using the Tenergy to charge a 7.2v 2000mAh battery and a 7.2v 3800mAh battery.I needed a banana connector to charge my batteries, so I also purchased a Redcat Racing ST-TAMFTO4B Version 4.0 Female Tamiya to Banana Adapter; the adapter fit the charger just fine.The charger is still new, and I haven't used it much. I'll update this review, if I have any problems.==============================Here are specifications from the Tenergy website:Indicators: LEDCompatible Chemistry: NiMH/NiCdInput Voltage: 100 - 240V ACCharging Voltage Range: 5.0V - 16VWeight: 236gOperating Temperature: -20°C - 80°COperating Humidity: 10% - 90%Storage Temperature: -20°C - 80°CStorage Humidity: RH < 85%Dimensions: 119mm x 61mm x 38mm (L x W x H)LED Indicators:* No Battery: Flashing Green* Charging: Solid Red* Fully Charged: Solid Green* Short Circuit: Flashing Red* Reverse Polarity: Flashing Red* Non-Rechargeable: Flashing RedHere is information from the user manual that was included with the charger:* it is a multi-current universal fast and smart charger* smart charger = just plug in battery and wait for it to be charged* for any NiMH battery packs from 6V-12V (5-10 cell pack)* do not charge battery packs under 6V or over 12V]* do not charge battery packs with capacity less than 1000mAh or over 5000mAh* it automatically detects the battery packs voltage* automatic cut-off by negative delta V detections, or* automatic cut-off when battery's temperature is over 60C* charger will stop charging after 4 hours (safety timer)* two current levels: 1000mAh and 2000mAh* for battery packs between 1000-2000mAh, use the 1.0A switch setting* for battery packs between 2000-5000mAh, use the 2.0A switch setting* for 5000mAh battery, charging time is about 210 minutes (using 2.0A setting)* for 2000mAh battery, charging time is about 150 minutes (using 1.0A setting)* one standard Tamiya male connector installed with the charger* red wire is positive polarity* always use the temperature sensor during charging* put the sensor onto the middle surface of the battery pack* Keep an eye on the battery pack when charging current switch is set to 2.0A.* Do not charge for a long time with such a large charge current.