Legrand Wiremold CMK50 Cordmate II 10 Foot 12 Piece Cord Cover Kit, Organizer for Wall, Holds Up to 3 Cords or Cables, White (1 Pack)

These were bought to hide my surround sound speaker wires across the living room. I purchased one kit before measuring the length in which I needed so of course I ended up being short. This Kit Includes: 4 - 30" CordMate II Cord Channels, 3 - C59 Couplings, 2 - C56 Flat Elbows, 1 - C57 Inside Elbow, 1 - C58 Outside Elbow, 1- C51 T-Fitting. This means you have 120" of cord cover. I used a saw to cut these to certain lengths and the plastic held up very well. It didn't split, break, bust or fray the ends to make it look unprofessional. With the addition to the couplings, elbows and fittings you can run these very professional looking with no cords poking or hanging out making your living room or other place areas of the house you have cords look like crap. This is a very nice alternative to tacks or coax cable clamps you nail to the wall. It's a more expensive alternative but the look you get with these really pays off because it reduces clutter.There seems to be plenty of room inside the cord channels and I was able to place two separate 18 gauge speaker wire into this without any issues. What many other comments fail to mention is the fact that these can be unsnapped from the side to allow you to add or remove cords more easily without having to run them from end to end. This was a nice bonus as I had already run the cords and had them hooked up prior to receiving these.They came white but are easily paintable to match any room / color you have and makes this is a nice addition to have with these. I will note that prior to applying the sticky side to the wall I use alcohol to wipe down the entire area I would be placing these to clear up any dirt or debris. This tends to be an issue when sticking anything to the wall and you should follow this step to ensure that it lasts for awhile. These can be used not only for speaker wire but ethernet cable, HDMI cable, coax cable, power cables and anything else you can slide into this. I would like to add that these do have limited space inside so you may not want to use these for every cord behind your TV / TV stand or computer desk. Once you do decide a place to use this and stick to a surface it adhesives very quickly and you only have a few seconds to decide if that's where you'd like it or not. I'd go ahead of time and make specific spots you want to place these to avoid any crooked placings.All in all a very nice product and so far so good!

This is our second time buying this cord cover kit - once to cover the cord of a hanging corner lamp and the second to cover a cable cord to our hanging TV. Both times we have been impressed with the quality and ease of use. Just cut to length, put the cord in and stick to the wall! The lamp has been hanging for almost 2 years and is starting to peel away at the corner, but nothing a piece of 2-sided tape won't fix. The TV cord cover is great to go around our bathroom door, and matches with the already white trim. The only thing that we ran into that was an issue was we didn't have enough of the corners and connectors, but luckily our local hardware store carried a pack so we were able to finish up our project in a weekend.

This is a decent product. It is easy to use and it comes with glue on the back side. The opening and lock system for the channels are easy to open and close. It fits right now an Ethernet cable and 3 speaker wires. May be able to fir more but at tightness expense. The only reason I don't give this product 5 stars is because of the price and what it does to your wall after you take it off. I use it on our concrete, white-painted walls and when I had to reorganize the entertainment system as soon as I pulled them off the wall, the paint peeled. What makes it good for holding heavy cables when you use it, may be bad for your walls eventually. Just a thing to keep in mind if you're living in a rented place.About the price, I'm from Colombia and there you can get channels like this with glue on the back side, different system of closing the lids, and they're way, way cheaper. This is something that may not matter to some since you don't have a lo to choose from here in the US, but I still can't get used to the price for these cord channels.

One of the best investments that I have made for my Home projector and screen. I am using it to hide my wire from the projector and the screen and I am amazed by the quality and usability. Definitely a no brainer and I would suggest everyone to pick one if they intend to do so or they are in for the market for a perfect wire hiding solution. Just one thing to make sure is be very careful when you stick it, because once you done its bit hard to take off without having issues with the paint. but if you try good you can take it off easily. I made a mistake of pulling it apart and my paint got peeled off. Its my mistake though. It sticks perfectly and no issues with coming off from wall and all. Make sure you use it in a smoooth finished area. its really easy to cut as well for your conveneince. I used a box cutter and its really easy for me. Even though its little on the pricier side I won't mind spending it because the end result is so good and satisfying. Definitely a recommend.

This PVC self-adhering wire gutter is of good quality and easy to install. In my opinion; I don't mind spending a little more for a quality product that is labor saving. The PVC cut easily and accurately with standard PVC cuter. I have used the metal "Wiremold" product in construction re-modeling for years and this product is faster and easier to install, and paintable with Latex paint. The adhesive is great as it The stuck the product well to textured and painted drywall. I put a TV cable and an ethernet wire through this and had enough room left over for at least another TV cable and ethernet cable if needed. The snap closure is secure and easy to zip closed. The fittings included in each kit were plenty for the 4 x 30" pieces. I purchased and installed most of two CMK50 Cord Mate II Kits in about an hour and a half. I still need to touch-up paint, but why rush into finishing a project when you are retired.Constructive criticism: The description could have been more clear if it started the product was PVC, and not metal. I had to read allot of reviews and Q&A's to discover the type of material.