🚀 Elevate Your Flight Experience!
The FrSky Yaapu Telemetry Converter Cable is a specialized connector that allows seamless telemetry data transfer from various Pixhawk flight controllers to a range of FrSky receivers. With a compact design and lightweight build, this cable is perfect for drone enthusiasts looking to enhance their flight experience with real-time data display on their transmitters.
| Connector Type | Proprietary |
| Cable Type | Proprietary |
| Item Weight | 6 Grams |
| Item Dimensions | 3.94 x 3.15 x 0.39 inches |
N**K
Works well - inexpensive. Yaapu on Taranis x9d-se
Works really well. Using it with a Matek H743-wing with ardupilot. Funny thing is, you don't need the red or black wires. Only the TX and Rx on the Uart and the one S.port wire. I removed the red and both black wires.
D**N
Some tips for setup
I just set this up on a plane with an F35 or Wing 10dof flight controller and an R-XSR. It seems to be doing everything that it's supposed to, but I hit some snags setting it up. First, I found that it only works when the RX is flashed with SPort firmware. It wouldn't work with FPort. Next I had to set the serial protocol to 4 in Mission Planner. Then go to the telemetry set up in the TX radio and discover sensors. Once the sensors are detected, go back into Mission Planner and set the Serial Protocol to 10. That will allow the data to flow though to the Yaapu script. I hope that helps somebody!
B**A
Simple but it works!
Well made with silicone wiring and a few different setups included. With a Pixhawk, it's plug and play! Pop one end into the Sport on an FRsky RX and the other end into Telemetry 2 of the Pixhawk. Change Serial 2 protocol from 1 to ten to enable pass through and you are in business. The install Yaapu's excellent LUA scripts and you are in business
C**E
Useful telemetry accessory.
Worked with the Black Cube (Pixhawk 2.1) and FrSky X8R receiver. Used with the Craft and Theory Flight Deck script on a FrSky QX7 transmitter.
T**G
works after tinkering with it.
had to modify and resolve 2 of the connections. then it started working for my rsxr reciever
R**.
Its an important part of my telemetry set up
use with a FrSky X8R recever, the Pixhawk and Jumper Pro 16 I can get gps maps and Telemetry on my Jumper Pro 16, It is a vital tool for me. I have three
P**P
Awesome
This worked just perfect with my pixhawk and Taranis. Its small well put together. Has extra cables if needed.If I need another this is where I'll come.
W**R
No problems
It worked as expected
Trustpilot
1 day ago
1 month ago
