Question 1

Is the specs on this inverter true, tested pure sine wave capable of 3000w cont/6000w peak? Due to pricing seems to good to be true and over-rated.

Accepted Answer

As a contractor I purchased one of these hopeing to run some power hand tools as well as recharge batteries for my cordless tools. The first tool I tried was a 15amp circular saw, popped the breaker as soon as I pulled the trigger. I returned it and purchased a 3000 watt from the invertor store, it works fine, however the price is double. So to answer your question yes the price is too good to be true.

Question 2

I will be feeding this with 3 12v agm deep cycle batteries (100 amp-hrs each).  will using this at 3000w harm my batteries?  overheat them?

Accepted Answer

Highly recommend upgrading your cables from the what comes with it though if you plan on higher loads above 1500W.  Also, make sure you have a suitable cable size (2 AWG or higher) to connect your batteries together.  Just remember that your 100Ah batteries will really only get you about 50Ah each. It should be able to go from fully charged to minimum pulling a load if 1800W for about an hour  (50Ahx12vx3), or a 100W load for about 16-18 hours.  You'll lose a little bit in overhead and when you run it longer the overhead eats into you power availability.. If you have a constant load of 3000W,  you'll only get a little above 30 minutes of use out of before your batteries will need recharging. Also @3000W , you'll be pulling 250 Amps (3000/12V) so you should be using at least 00 or 000 cables to connect the inverter.. Each battery will pull ~83A each so make sure that each battery can supply it.

Question 3

Has anyone dealt with the manufacturer? Are they easy to deal with? The 2000 watt unit has a lot of 1-star reviews, but this one doesn't. I wonder why

Accepted Answer

Another thing you should  use a grounding  rod  and make sure your inverter  is earth grounded ,rods cost about  $16.00 for 8 feet  I used a T post tool to drive it in ground.  Also if you plan on using solar panels  make sure they too are earth grounded .highly recommend  doing this .
I have a 1500 watt cont. With a 3000 watt surg .
Using  2 gauge copper wire  from batteries  to inverter  a must or  4 gauge aluminum  wire 
And use a circuit breaker  between  batteries  and inverter   this will protect  it .
Also if your using AC power you should  put a circuit breaker  between  inverter  and tools or power equipment  . Safety should  always   be number one.  Make sure unit you are powering is grounded also to prevent  electric shock.

Question 4

What are the true dimensions ??

Accepted Answer

3 7/8 high 9/38 wide mounting flange to mounting flange 21 1/4 long from end of power screws to end of power recepticle. This is for the 3000 watt inverter.

Manufacturer	GoWISE Power
Brand	GoWISE Power
Model	PS1004
Product Dimensions	55.88 x 23.62 x 10.16 cm; 4.49 kg
Item model number	PS1004
Manufacturer part number	PS1004
Wattage	6000 watts
Item Weight	4.48 kg

GoWISE PowerPS1004 3000W Continuous 6000W Surge Peak Power Pure Sine Wave Inverter with Starter Cables and 4 Output Sockets, Updated Model, Grey, Standard

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions