VEVOR 40 Gallon Sandblasting Cabinet, 40-120PSI Portable Benchtop Sand Blasting Cabinet, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal

Having used larger units in industry, I honestly wasn’t expecting much. I also wasn’t sure how well my smallish 5.3cfm@90psi/6.7cfm@40psi compressor would keep up but it does just fine. I don’t have to stop and let the compressor catch up any.The instructions were clear enough, all the hardware was already sorted and labeled. It arrived well packaged and with no damage.At 50 psi it does a great job with 80 grit glass beads. The trick is use the least pressure you can or you will quickly turn your beads into dust.Imho, a cyclone dust separator and a water/oil filter are required accessories. My cabinet seals up well enough that when I kick on my shop vac I can’t open the door from the pressure differential. The cyclone dust separator is very effective at capturing the dust before it ever reaches the shop vac.I used the Woodstock W1042 2-1/2-Inch Universal Dust Port from Amazon mounted with double sided tape to facilitate the use of the dust collection system.I also sourced the NANPU 1/4" NPT Compressed Air Line Filter, 5 Micron Element, Bracket, Poly Bowl, 145 psi from Amazon. I have it mounted at the cabinet and it does a good job of preventing any condensation from contaminating the beads.I use 80 grit glass beads that I source locally.I am very satisfied with the product quality, performance and durability, especially at this price point.

Works great. Cabinet light inside quit working fairly quickly. Otherwise no issues. I recommend paying good attention to dealing while assembling it. Seen a lot of reviews about it leaking all over. I managed to Lee my leaks to a minimum.

I bought this as an additional blast cabinet in my machine shop.Assembling it was kind of tedious, took me around 3hrs.Other than that I am quite happy with it.i used the tube sealant that was sent with it to seal the up and down seams.The bottom floor had a rubber gasket preinstalled.I did install a vacuum hose to it and run it through a turbo dust collector.I use this with fine glass bead, using the smallest nozzle at 50PSI.Works great for my intended use.

Don't waste your hard earned money. So I read and watched a few reviews. I went way above and beyond to seal this thing up so that I didn't get sand in my face. The lid leaks horribly no matter what I did. I ended up adding a shop vac suction adapter to it to help cut that down. My biggest gripe is the gun quality. Unless you are doing an object the size of a index card, prepare to loose your mind. You literally have to jiggle the suction end of the hose in the sand to move it around every minute or so as the sand does not flow down to it well. I tried 3 different types of product and quantities now and always have same end result. The shallow taper of the pan doesn't allow it to flow to the bottom well enough to reach pickup. The actual gun isn't efficient either. The output is sporadic and doesn't flow near as well as my buddies Harbor Freight Model. I would so return this if I had not already had it assembled on my bench.

For thw most part, there are no assembly instructions - vague diagrams, at best, is provided. It would have a huge impact if the assembly documents were on the Amazon site, I likely would not have purchase it. The 24/7 help line is worthless, it took 8 days for them to figure out what the liquid gasket (nothing in the assembly documents), was for and, even then, the information was incorrect as far as I could tell from research on similar cabinets of other manufacturers. They are courteous and willing, but every question has to go to a tech team which takes 2 - 3 business days to get a response. I had to send them a picure of the liquid gasket tube before they would provide a response. It is obvious they do not know there own product. The panels are warped from the forming process and exrremely difficult to assemble, you will need a lot of clamps to bend and hold panels in place while bolting together. It is difficult to determine whether a panel joint goes under or over the adjoining panel - the diagrams do not show or adress this issue. Very disappointed.

The thing does what it is supposed to do. If you need the assembly instructions to put it together, do not buy this product, the assembly instructions are terrible. They give no clue regarding how to set it up or use it. This product comes with an inside light. Neither the on/off switch for the light nor the power adapter supplied worked. I had to get another power supply and rewire the switch to get it to work. When I contacted Vevor, they wanted video or pix sent to them.Would I buy this thing again? NO!

All holes lineup and assembly is fairly easy.Good quality product.

I should've bought this long ago!