VEVOR Bike Repair Stand, 4-Leg Steel Bicycle Repair Stand, 42.5"-74.8" Adjustable Height Bike Maintenance Work Stand with Magnetic Tool Tray, Foldable Bike Service Stand for Home, Shop (Max 80 Pounds)

I was pleasantly surprised by the quality and build of this bike stand. It was a snap to put together and it holds my 30 lb hybrid bike perfectly. The screw knobs tighten well enough to hold securely with just firm thumb-tight pressure; you would want to be careful about over tightening them because they are plastic knobs. The base is wide and I would have to think stable enough for almost any kind of bicycle that was a suitable weight. I purchased the 80 lb model because I wanted to assure stability even though my bicycle is less than half of that weight. I have seen reviews here that that are critical for much heavier bikes, but I don’t think I would’ve bought a stand at this price point and this weight rating if I had an e-bike that weighed more than 60 lb! but this is just my speculation. The front wheel stabilizer works well enough, although I wonder about the durability of the rubber straps that secure either end of it. The adjustable rod for the stabilizer needed to be lubricated in order to be easily adjustable; because it is not a load bearing rod and slippage is not an issue, lubrication is warranted. Obviously, you would not want to lubricate the main rods because that would weaken the grip of the screw knobs and clamps. For the cost, I think this is a very good product.

When choosing a stand, I considered a much smaller wheel stand. But for a little more, this seemed like it might be a huge upgrade. It is. This is fully functional repair stand similar to much more expensive stands in structure and function. I have a vintage cruiser bike that weighs a ton. The top bar is two curved tubes, so I was unsure whether the stand would work. However, I locked the front slanted tube in and that worked fine. It took a little doing to get the bike balanced, and it was a two-person job. But once balanced and locked in, my bike stayed rock steady in the air while I work on it for several hours. I had to do a lot of pushing and pulling because I was replacing the bearings in the bottom bracket, the chain, the crank, and the pedals. But no problems at all with the stand. It does have plastic in some places I'd like it have metal, but the plastic is tough and thick. One plastic element is a small shelf for tools and parts, with a magnet under the tray, which is nice for things like screws and washers. The stand folds into a fairly small unit, but the shelf sticks out. Taking the shelf off and putting it on would be a pain. However, you can still put the folded stand in a closet. If you work on a bike now and then and want to do it standing up, this does the job. If you work on bikes often, this stand will probably not last long. For the cost: an excellent stand. Highly recommended.

Was able to set up the entire stand in less than 15 minutes for the 1st time out of the box. Feels solid and I like how the feet are adjustable. It is more stable and sturdy than I expected. I would have given this product a 5 star, however the box it came in was damaged and then crudely taped up. While removing my 25 pound bike from the frame clamp, a washer fell off of the adjustment bolt.

Well worth the price of $60 bucks. While I've read a lot of complaints about he steel version, the aluminum version seems to be great. It's thick, feels durable and the rotating clamp mechanism seems like it'll hold up well. I have a road bike, so I'm way below the 60 lbs weight limit, but I would guess you can get very close to 60 lbs without much issue. If you're working on a hard floor, I'd add some rubber stickers on the feet to increase friction so it doesn't slide around. In the past, I've had a Park PRS-25 workstand, which is pretty much top tier at well over $400. The main difference is that the clamp feels more durable on the Park, compared to this Vevor, but keep in mind that we're talking well over 7x the price. These days, I only work on my own bikes and this Vevor will definitely hold up for this sort of light use. The plastic on the Vevor clamp feels thick and heavy duty, so I think it'll hold up just fine for road bikes and non-electrified mountain bikes. Take away message is that at $60, you're not going to find a better bike repair stand and if you're just working on a few bikes occasionally, then this Vevor stand will do the job for years.

Way exceeded my expectations. Very sturdy construction. Pivot arm for seat step or frame attachment. I bought it to help take better care of my road and mountain bikes. It certainly will help with cleaning and maintaining! Highly recommend.

Would be 2 1/2 star if possible. This is exactly what you expect, a rack at an unbelievable price that delivers sub par performance. The stand is sturdy and works great, the tool tray is a nice addition, the problem is the clamp nuts are soft, they do not stay put no matter how tight you make them, the bike clamp is also too small for anything other than clamping the seatpost of my bikes. If it would open large enough to get the frame, you could balance it better and not worry about the soft clamping issue.

Very sturdy,really well made. Folds up nicely

Purchased 88lb stand for a 65lb e bike and the stand couldn't hold it at all. The frame grip is just a bunch of plastic teeth that slip passed each other. Tried using the grip to grab the seat post and it just slid no matter how tightly I clamped it down. Found the center of gravity but couldn't work on the bike because the stand kept falling over. The tool tray doesn't fit into the provided slots properly. All in all if you're getting this for an e-bike don't, seriously save yourself the money. I wouldn't get it for a regular bike either but that's up to you.

Very handy when making repairs

article parfait pour un vélo électrique très costaud et robuste

Equipamento de grande qualidade

After much deliberation I settled on this particular product and I have to say I am not disappointed. Build quality is excellent, the parts have a real quality feel to them. It goes together really easily and quickly and once built it is extremely sturdy and supports my electric hybrid bike really well. The price of this stand is very favourable compared to others of a similar spec and I am very happy with it.

Très bon pied d'atelier pour vélo. Solide et ne vibre pas pendant que je travaille sur mon vélo