Icy Dock Flex Fit Quattro MB344SP – Mounting Frame for 4 x 2.5 Inches (6.4 cm) SSD/HDD IN 1 x 5.25 Inches (13.3 cm)

Easy to use and install, and a good fit for the SSDs installed. Plastic but robust enough quality. Sufficient spacing between drives that temps haven't been an issue. Cost-effective but still decent quality.

This is a lovely wee solution. Take care to make sure you have a 5.25 bay in your frame, my PC only had one and it was obviously an afterthought. This mount allowed me to easily mount 2 x 2.5 inch drives in the case without need to find specialised screws for the manufacturer supplied mounts. The 5.25 fit nicely in, and the standard screws pinched it up nicely. Very happy.

Using this '4x SSD' adapter to hold four 2TB 2.5" hard drives in a single internal 5.25" bay. Would be nice if it was metal to help dissipate drive heat better, but otherwise it's fine. I deducted a star because: (1) the mounting holes are strangely positioned so I had to remove the 'quick release' drive clamp from my case and screw this in instead; (2) it ended up very close to the front of the 5.25" bay so I had to trim the back of the blanking plate; and (3) the mounting screws are non-standard so if you lose the four it comes with you're, um, screwed.

Handy to have. Resolved my issue with missing 2.5" bays. It needs a bit of room to easily replace and connect the drives.

Mounts four 2.5 inch drives, SSD's presumably into a 5.25 inch bay, for example when taking up the space a DVD drive may have taken up. Plus side is four fit pretty well and is very efficient use of space. The item can be split in two if needed. It was hard to mount, all disks are fastened in using screws on the outer side only. These need to use countersunk screws that are flush with the edge or the whole thing won't fit. The screws to hold the arrangement into the 5.25 inch bay are designed to tap into the plastic. This is not a bracket that can be routinely moved. Decide where you want it, put it there and leave it. If you only want one or two SSD's I recommend using a metal 2.5 to 3.5 and adding brackets for 3.5 to 5.25. Al together simpler and easier to fit.

Absolutely brilliant i couldn't recommend this thing enough. I have a Beqiet Silent base 800 and had 970's in sli. I decided to upgrade to an Asus 980Ti Strix i needed to remove all the drive cages to fit it in. With this bit of kit i could transfer a HDD and 2 SSD's to a 5.25bay. I will probably get another when i get more SSD's. It is worth getting to just remove the hard drive cages just for better airflow to be honest. Its also easy to use

Does what it tells, measures are perfect fitting, with a nice touch of having a front panel. Ready the manual. It's in english and the images by themselves are straight forward to follow. It's very light, abs plastic. Comes with screws and they fit well on the case and the disck. Amazing features, 1xHDD and 2xSSD fit perfectly on it. Would highly recommend as great value for money and functionality

I bought the 4 (2.5") into 1 (5.25") drive bay option. I wanted to mount 2 SSDs in my ancient but lovely Coolermaster brushed aluminium tower case. I love the way the SSDs just push into this unit and are clamped down by sturdy plastic U springs - no screwing required. It's all plastic but seems sturdy enough. The only trouble I had was screwing this adapter into the empty 5.25 CD bay. I couldn't. My Coolermaster has aluminium face plates for empty 5.25" CD drive bays. 5.25" wide with 2" legs each side that slip inside and screw into the tower. Those legs are only 1mm or so thick but they made it impossible to push this unit back far enough to make the mounting holes visible through the slots. If the sides of this unit were peppered with holes it'd make fixing it in place more hit than miss. However, it's a damn easy DIY job to drill new holes in situ, which I'll do tomorrow. Remembering to take the SSDs out first, I hope... If you're putting this in an HD bay (no face plate with annoying legs) it'd probably fit fine. This adapter makes it a breeze to add or remove SSDs though, without needing a screwdriver.

Material flexible y totalmente encajable en ranura de cd o dvd.Por fuera no se ve nada y por dentro tienes cuatro discos de 2,5 en pleno funcionamiento. Hay que tener en cuenta que tu fuente de alimentacion tenga la potencia y los cables de corriente necesarios.

El producto cumple los requisitos sobradamente, ahorra espacio en la torre, los HD son fácil de instalar (no necesitan tornillos). El material es de buena calidad, se ve que Icy Dock son buenos fabricantes. También comentar que el pedido me llego en menos de 48 horas, en perfecto estado y embalaje.

If you have a PC case from the golden era with 5.25" bays this will fit. I wish that I had bought more, but they seem to be going out of circulation. I use one in an Optiplex 3020 MT with a 3.5" HDD + 2 SATA SSDs. This device is not meant for higher capcity 3.5" HDDs, safe bet is to stick to 4TB and below (unless your HDD has 3 mount points on each side). I also don't like that the recessed area cover could slide out of position. On my Inspiron 620 MT the recessed area is less of a concern since a flap covers it. I'm using a Corsair adapter that allows 2 SATA SSDs to occupy the 3.5" space. This gives me 4 SATA SSDs. I didn't locate any screws to mount the flex fit trio inside my case, but PSU screws worked on my 620 MT (the 3020 MT has extra screws behind the front panel). In practice your case should have active cooling if you're using these.

Muy práctico para mis discos y reutilizar mi DVD de laptop

Der ICY DOCK Flex-FIT Quinto MB344SPO - Einbaurahmen benötigt einen 5,25" freien Einbauplatz. Der Einbaurahmen selbst ist solide und passgenau aus Metall gefertigt. Er bietet Platz für bis zu 4!! 2,5" Laufwerke, entweder normale 2,5" Festplatten oder SSD's. Zusätzlich ist noch Raum für 1x slimline DVDRW SATA Laufwerk mit einer Bauhöhe von 9,5 oder 12mm vorhanden. Damit können in EINEM! 5,25" Einbauschacht bis zu 5 Laufwerke untergebracht werden. Dem Einbaurahmen liegen alle notwendigen Befestigungsschrauben und 4 Halterungen für jeweils eine 2,5" Festplatte oder SSD bei. Es empfiehlt sich, die 2.5" Festplatten an deren vorderen Schraublöchen in dem jeweiligen Einschubrahmen zu verschrauben. Diese 4 Einschübe sind keine Wechelrahmen! Ebenso liegt ein Slimline SATA Anschlusskabel für die Stromversorgung des DVD Laufwerks bei. Da der zweite Anschluss ein normaler Anschluss für das SATA Signalkabel ist, wird KEIN weiterer Adapter SATA auf Slimline SATA sondern nur ein normales SATA Signalkabel benötigt. Die mitgelieferten Blenden passen genau für ein 12mm Slimline DVD Laufwerk und für die bis zu 4 Festplatten. Ich verwende diese Lösung für einen kompakten Highend Multimedia PC mit den Abmessungen normaler Stereo Geräte wie Steuergerät, Verstärker, DVD Player, etc.