RJ45 Crimp Tool Kit, Pass Through Ethernet Crimper, Professional Ethernet Crimping Tool Kit, RJ45 Crimp Tool and Tester(9V Battery Not Included) All-In-One Kit for Cat5e Cat6 Cat6a 8P8C

Worked great, I am a first time homeowner installer and needed jacks on my cables, I was probably the slowest to ever do this but I did it and the lines worked after!

The media could not be loaded. First off, I searched high and low, both pricing and reviews for a RJ45 passthrough crimping tool. Ranging from $10 to near $100. I cashed out some forgotten Microsoft rewards points for amazon gift cards. That got me $14.Looked and sorted and found this. Paid the tax and got it in a few days.1st attempt was poor. I didn't cut the legth of wire right and ended up with a 2 wires criss-crossed. - so one wasted connector.2nd attempt, better, wires were right, but they didn't get cut properly. - Another wasted connector.II was about to go ham and write a bad review. I calmed myself, tried another, this time turning the crimper so I could see the ends, so facing me. Squeezed hard and quick, and PERFECT! I was so happy.I immediately started making 3 ethernet cables I needed to wire my basement, it took just a few minutes each and worked each time with full speeds.Oh, And IT RATCHETS? I wanted a ratcheting crimper and didn't see one in this price range but was pleasantly surprised.Things to keep in mind!1. make sure you leave about 3" of stripped wire. This makes it easier to unbend and get them in the proper order.2. SLOWLY add the wires into the passthrough connector. Once through verify the order again.3. Push the connector down to the cable jacket. If you need to press down or crimp the jacket so it fits inside the connector (It iwll not crimp to the wires, the full cable AND jacket have to be inside the connector)4. Guide the excess wires and connector into the crimper so the wires are facing you. Once the connector is in all the way, squeeze hard and fast and all of the wires should be cut flush and you'll have a perfect termination.Plug your beauty in and test the connection!

I like that it's light weight and durable and comes with accessories, making it good value for the money

This RJ45 Crimp Tool Kit is perfect for anyone working with network cables. The crimper is solid and easy to use, and the pass-through design makes clean, secure connections every time. The included tester is super handy for verifying cables (just add a 9V battery), and the kit comes with everything you need to get started. Great quality and value—made wiring up my Cat6 network a breeze!

This is a good tool for creating your own ethernet cables. I've used it several times and it works great. The pass thru connectors makes it easier to verify the wire order before crimping.

This works pretty well and is a great for the price, but it took me a few tries to get it right.When trimming off the extra and crimping you need to be VERY careful to not let any of the signal wires bump into the blade. I've never used a pass through crimper before so I'm not sure if this is common, but it seems like there could be a lot more clearance for the pass through when the device is in its fully open position. If you bump any of the signal wires into the blade while passing through, your crimping attempt will be completely ruined and you'll have to start over.Once I got the hang of that, this thing worked well and is easier to get a nice solid RJ45 connector - at least to me - than when using a non-pass through crimper.

The instructions were too small to read and very confusing. Other than that the item worked fine.

I’m not in a profession that uses these for work. I bought these for around the house and for that purpose they work great. Good price for a quality tool.