AstroAI Paddle Board Pump，20 PSI High-Pressure SUP Electric air Pump, DC Metal Structure Dual-Stage Inflation&Paddle Board Accessories，7.5 inches LED Screen Air Pump, Deflation for SUP,Inflatable Boat

I don't intend to use this thing to inflate six paddle boards, or anything other than paddle boards really, but as promised I was able to inflate two in a row tie first time I used it as well as a few other inflatables without any strain. It is a bit noisy but the fact that I can set a limit on the psi level for paddle boards and ot automatically stops when that level is reached is phenomenal! I have used this on two separate days so far to fill up a paddle board and love that I can start the process and walk away to do other things. Using the hand pump to do the job takes forever and strains my back, ruining my enthusiasm for a leisurely paddle on the water. There are a variety of pumps out there, I really like this one!

We used the AstroAI Paddle Board Pump ONE time. It worked fine, BUT when we tried to use it the second time, it would not power on. After a few google and YouTube searches, we figured out that the fuse blew and had to buy a new one. This sucked because we were in a remote location that did not have stores that sold these types of fuses and we had thrown our manual pump away. Alas, we had to abort SUP that day. Also, by the second time we used the pump, it was past the return window, so we couldn’t get a new one or refund. Once we purchased the new fuses, it took over 5 minutes for the pump to turn on. It worked once after we installed the new fuses. I will report back if there are any other hiccups. I was very disappointed, because this pump is not the least expensive that Amazon offers so I expected more.

It takes about 20 minutes to fill a paddle board to 15 psi, 8 minutes for my kayak to .8 psi. The hose is hard plastic and feels cheap, the connectors arent a perfet fit for any of my paddleboards, innertubes or kayak so a put an extra rubber seal around it but you still need to hold it if you dont want it to leak. On my third outing the pump broke and I'm 1 week past the return window now. I suggest looking elsewhere for a quality pump.*** instantly after I posted this review the company reached out and offered a free replacement but i ended up not needing it. What happened was the fuse burnt out then I replaced it with the spare it came with but the unit still didn't power on. The spare fuse looked good but after getting back from my trip I used a multimeter and identified it had an open that you couldn't see. I replaced the fuse again and it works as it should now.

When you have a Stand Up inflatable Paddle Board, this save so much time and energy when trying to get out on the water. I love how you can set it to the PSI and it just goes on. It takes about ten minutes for inflation. This will fill multiple paddle boards which is so nice for helping others friends out. My favorite aspect of the pump is how it deflate the boards and get all the air out to make it easier for packing up the boards.

Blew a fuse in my fusebox after using two or three times. :(Updating original review.....the pump worked fine a couple times, and I likely just received a bad unit, but not willing to risk damage when it continuously blows fuses in my fuse box. The customer service was outstanding and went above and beyond handling the issue.

I've only used it at home, but it seems to be a great pump. Pumps up the board to the set psi.

The media could not be loaded.  This product is falsely advertised through and through. It took longer than 10 minutes to inflate the paddle board. Actually, it took more like 15-20 mins. Not a crazy discrepancy, but notable.I purchased this product with the purpose of inflating 2 iSUP (Inflatable Stand-Up Paddleboards). I finally found a weekend to use my brand-new paddle boards and electric pump, so I was naturally excited. The first paddle board inflated to 15 PSI perfectly. It was fairly noisy when reaching 10 PSI and above, but that didn't bother me. During the second inflation, however, the pump got substantially louder. To my surprise, the hose that connected the machine to my paddle board LITERALLY melted. I had to use my paddle board at a 15 PSI instead of the target 18 I'd programmed it for.This product is definitely not capable of inflating 6 SUP back-to-back as they advertise. The hose thoroughly melted and detached from the pump during the inflation of the second paddle board. This product is not durable at all and I wouldn't waste your time by purchasing it.

PLEASE READ ENTIRE REVIEWThis pump fried the 12v outlet in my car. It didn’t even finish one paddle boardI have to update my review… as soon as I posted my original review the company reached out to me!! They provided amazing customer service and support. They offered me a replacement or a refund without asking any questions. They stand behind their product. I opted for a new pump and was sent a replacement the same day. Given the customer service alone makes the company worth dealing with.

The AstroAI Electric Air Pump for inflatable stand up paddle boards is a must have. It makes quick work of not only inflating my stand up paddle board, but it can also deflate it as well. It is a massive time saver, not to mention back saver compared to using a manual hand pump. The air pump is well built with a large footprint that is stable on the ground. It comes with 6 different adapters and one that fitted my paddle board. However, when I first tried to connect the adapter to my paddle board, I found the fitment felt too tight and I couldn't turn to tighten it. Then I found another silicone gasket in the box that was smaller. I swapped the gasket and this fitted my paddle board perfectly.Once connected to 12V outlet, you just have to set the pressure (psi) and press power to start inflating. Also be sure to connect the hose to the correct outlet for inflation. The air pump has a dual-stage motor starting in low-pressure mode (360L/min) and automatically kicks into high-pressure mode (80L/min). In this high-pressure mode, the pump is loud and it takes about 10 minutes to get the paddle board to 15psi. The air pump turns off once the set psi is reached. I also tried the deflating function and this worked great too, quickly deflating my paddle board for easy packing back into carrying case. This air pump can go up to 20psi, which is more than enough for most inflatable stand up paddle boards, kayaks and boats. The AstroAI air pump is expensive but if you do a lot of paddle boarding, or need to inflate multiple paddle boards, this well-made air pump is an absolute must have. The air pump comes with a nicely made storage bag to store the pump, hose, adapters and power cables.

The AstroAI Paddle Board Pump is a high-performance electric air pump designed specifically for inflatable stand-up paddleboards (SUPs).**Dual-Stage Inflation**: One of the standout features of this pump is its dual-stage inflation mechanism. Unlike single-stage pumps, the dual-stage pump is 40% faster, which means it can inflate your SUP more quickly and efficiently. This is a significant advantage, especially if you have multiple boards to inflate.**High Pressure Output**: The pump is capable of reaching a maximum pressure of 20 PSI (pounds per square inch), making it suitable for SUPs that require high-pressure inflation. It's powerful enough to inflate a SUP board from 0 PSI to 15 PSI in just 10 minutes, which is impressive and time-saving.**Two Smart Modes**: The pump offers two smart modes to suit your specific needs. In low-pressure mode, it can achieve a maximum airflow of 360 liters per minute, ensuring rapid inflation. When you need to reach higher pressures, the high-pressure mode can deliver a maximum airflow of 80 liters per minute while maintaining accuracy.**User-Friendly Design**: The 7.5-inch LED screen provides clear and easy-to-read information, allowing you to monitor the inflation progress and make adjustments as needed. The screen also adds a touch of convenience to the overall user experience.**Complete Package**: The package includes all the necessary components for efficient and hassle-free inflation. It comes with the SUP pump itself, a DC power cord for power source flexibility, battery clamps for power supply options, an air hose for connecting to your SUP, a storage bag for neat storage, six nozzles for various applications, a replacement fuse for maintenance, and a user manual for guidance.**Auto-Off Feature**: The pump is equipped with an auto-off feature, which is a valuable safety measure. It automatically stops inflating once the desired pressure is reached, preventing over-inflation and potential damage to your SUP.In conclusion, the AstroAI Paddle Board Pump is a reliable and efficient tool for anyone who owns inflatable stand-up paddleboards. Its dual-stage inflation, high-pressure capabilities, smart modes, and user-friendly design make it a valuable addition to your paddleboarding gear. Whether you're inflating a single board or multiple boards, this pump can save you time and effort while ensuring precise inflation.

We have a pair of paddle boards, and while the manual pumps suffice, I encounter difficulty achieving the desired 15 PSI pressure. Striking the balance between not overfilling yet attaining optimal support proves challenging.Enter the AstroAI Paddle Board Pump – a breeze to operate. Its two-stage Inflation Process is brilliant: swift initial inflation brings the pressure close, succeeded by a precise second stage that tunes it to the desired pressure in my case 15 PSI. This entire inflation process lasted around 10 minutes.I don’t have any problems with my eyesight, but I do like the sizable 7.5-inch LCD display. It really ensures clarity and ease of reading throughout inflation. The added bonus of a carry pouch further enhances its appeal. We recently went to the Jersey Shores and our Boogie boards are also inflatable, we kept the pump in the truck of the car and were able to inflate them right there on the beach.The only downside is that the pump's operation emits considerable noise. Although, I have never used an electric pump that didn’t, so I guess its to be expected. Also, bear in mind that it needs to be in proximity to the car for refills.

The Paddle Board Pump (ASIN B0BYJVFVHV) from AstroAI came complete with carrying/storage case, six adapters, three O-rings, replacement fuse and instruction manual.I picked this up to help with inflating two SUP's.Usage was straight forward; Connect to SUP. Power up. Set desired PSI and start. Pump automatically stops when it reaches set PSI.Pro-tip: If "Real PSI" isn't displaying after a few minutes, consider reseating connectors/adapters and/or use O-ring. If still not registering (and/or not increasing), you very likely have pump set on low pressure usage. Set pump to high pressure and repeat steps again.With respect to the pump, I appreciated the large display and numerous adapters. The only negative for me was the length of the hose. I found it to be far too short and rigid, and mine had what looked to be hot glue on one end (where connecter attaches to the hose), I'm guessing to create a seal.I hope you found this review enlightening and/or helpful to your decision making.

At the time of this vine review this was retailing for $129.9 with a $30 coupon.1. Large LCD Display: The AstroAI Paddle Board Pump's large 7.5 inches LCD display provides clear and easy-to-read information during the inflation process. The display shows real-time pressure readings, allowing me to monitor the progress and ensure that my board reaches the optimal PSI pressure for a stable and fun paddling session.2. Convenient Carry Pouch: I appreciate the included carry pouch that comes with the pump. It's well-designed and makes it hassle-free to transport the pump to and from my paddling destinations. The compact size of the pump, along with the carry pouch, ensures that it doesn't take up much space and remains easily portable.3. Two- Stage Inflation Process: The first stage involves rapid inflation to quickly reach a certain pressure level, followed by the second stage, which fine-tunes the pressure to the desired 20 PSI. This inflation process takes approximately 8-10 minutes, offering a decent flow of air, saving time and effort in the process.4. Noise Level: One downside of the pump is that it can be quite loud when in operation. While it doesn't affect the pump's performance, it's worth noting that the noise might be a concern for those who prefer a quieter experience during the inflation process.5. Refilling Proximity: Another consideration is that the pump needs to be refilled closer to the car, as it requires a power source during operation. While this is generally manageable, it might be a slight inconvenience for those who prefer more flexibility in their refill locations.6. Consistent Readouts: Comparing the AstroAI Paddle Board Pump with my other SUP pumps, I have found that this pump provides more consistent and accurate pressure readouts. The intelligent inflation process ensures that the pressure is precisely regulated, resulting in better board rigidity and stability.7. Quality and Price: Though the AstroAI Paddle Board Pump is on the expensive side, its quality has proven to be exceptional after multiple refills. Its sturdy DC metal structure and reliable performance make it a worthwhile investment.