3M Double Sided Mounting Tape, 3M5952 Heavy Duty VHB Foam Adhesive 1/4"x15.4 FT for Indoor Outdoor, LED Strip Lights, Automotive Trim & Home Office Décor, Waterproof & Industrial Grade,1/4” x 15.4 FT

Description

3M VHB Heavy duty double sided tape This heavy-duty two-sided tape can be used for a wide array of projects. Mount bathroom fixtures in your home, add signage to the exterior of a commercial building or deck-out your car with the flashiest LED lights. It adheres firmly in minutes and becomes 100% bonded within 72 hours. Because it is particularly capable of providing a smooth, quiet and durable ride on the open road, it is the preferred 3M automotive double sided tape for specialty vehicles. Easy Installation ✔ 25% strength of bond in 30 minutes, 50% strength of bond in 60 minutes, 75% strength of bond in 12 hours, and 100% strength of bond after 24 hours. ✔Double sided tape is black. Length 15.4FT, width 1/4 inches, Package Quantity: 1 roll Application Guide: · Surface Cleaning: Quick pre-clean of tough spots if necessary. Wet cloth to remove most contaminants. Final wipe with dry cloth. · Priming the Surface: Primer on a disposable towel, followed by a dry towel. Dauber bottle followed by a dry towel. Foam brush. · Abrading Your Substrate: Light abrasion by hand. Clean the substrate after abrading to make sure all sanding debris is removed from the bond area. · Tape Application by Hand: Start the tape at the edge of the surface and lay it down, applying constant pressure as you go. Apply a roll down force of at least 15 lbs with a dense J-roller over the entire area to ensure good contact between the tape and the first substrate surface. Remove the protective liner to apply the other substrate. · Applying Final Pressure: Applying pressure to the applied tape facilitates optimal wet-out onto the substrate. Review: Se fija muy bien a las superficies metal/plastico, por si tamaño es discreta. Review: Cinta doble cara delgada para trabajos delicados