Nilight 3Inch Round Motorcycle Led Light Pods 2PCS Spot Led Fog Light 1550LM Built-in EMC Offroad Driving Auxiliary Ditch Light for Motorbike SUV ATV Truck Boat Tractor Forklift

Good narrow long range beam. Will light up a dark colored animal at 600 ft. easily. Just what I was looking for at a very good price.

Excelentes luces auxiliares

This is a high end LED light kit, but is not as optimized for motorcycles as the advertizing would lead you to beleive.The bracket is very thick and sturdy, but is made to be atached to a flat surface with a single screw or bolt, there is no alternate bracket for bars.The switch comes with a weather boot, but has neither an IP nor NEMA rating. Again, it is also designed for mounting in a flat surface. The connectors for the lights are weatherproof, but no care has been taken to add weatherproofing to any of the other wire joints.And then there are the wire lengths. You get a maximum of five feet between the lights. The relay must be mounted within six feet of one of those lights and within eighteen inches of the battery. The switch must be within six feet of the relay as well. The harness comes with a 15amp automotive style fuse that is good enough for protection of the wires.This system will probably work well in a side by side or quad, but for a motorcycle or larger vehicle, you will be rebuilding the harness

Honda NX500 CB500X - nice setup to see and be seen. Impressive both day and night. I used the spot lights, not floods, and for street riding they work fine. Long range but still have enough lighting on the sides of the road. No one is flashing their lights at me so I guess they are not completely obnoxious. I cut back the wiring harness and used the weatherproof connectors with my own switch and the Honda accessory lighting connector.I can’t speak to durability or longevity just yet. Hopefully they last. I mounted them with an SW Motech light bar.

Best set of light kits out there. Prewired with relay, watertight switch and excellent harness protection for outside elements.

The good thing about Flood/Fog pattern lights,... other than using the peripheral edge to pair and level the projection,... a few degrees here and there won't make much of a difference. The coverage will be short and wide. The output density of these lights is/was significantly higher than expected. The triangular bead only adds to the allure of the vehicle.

Both took water in.One of them stopped working at all.Threw them away after 2 months.

This is the 2nd set of lights I have purchased from this manufacturer and I’m really impressed.Quality is solid and well made.Price is also great I highly recommend Nilight lights.