17G180 Magnum ProX19 Cart Paint Sprayer, Blue & white

Very fast shipping! Great product! Of course it's Graco

This is the first time I have used a paint sprayer. So far I have used it to paint the interior of a large, wooden, two-story, exposed beam and rafter storage structure. It has been a beast of a job, messy and difficult. I have put about 70 gallons of paint through the sprayer without a single issue. This model has been worth every penny, easy to use and reliable. The instructions are clear and helpful. The manufacturer videos on the Amazon website and YouTube are very useful. The equipment has worked perfectly. It did take me a little while to figure out that Kilz paints need a little thinning (Kilz materials don't warn you) to flow properly. That might be worth a note in the manual unless I missed it. It also took me a minute to recognize and adjust to the pulse nature of the pump during operation. The instructions mention it but it might be worth editing the videos to highlight that. But again, this was my first sprayer. The hose that comes with the sprayer is long enough for anything up to two stories. I clean the .415 nozzle that came with the sprayer carefully after each use, and am still using it. I bought two pole-type extensions for the rafters and ceiling to minimize time spent on a ladder and to reach corner and eave areas. They were also worth every penny. The elevated areas made a respirator, glasses shield, hat, and simple disposable paint suit essential given the inevitable overspray. I have followed the maintenance and preparation instructions carefully except for straining the paint. In addition to Kilz 3, 2, and Restoration for base coats, I used Valspar Deluxe for top coats. I was careful to inspect and thoroughly mix each container and have not had any problems so far. The photos were taken after one coat of Kilz. The ProX19 has been fantastic.

As a professional painter, this my go to rig! Very easy to use and exremely reliable with more then enough power and PSI for all projects.

Easy to set up and prime, it's very easy to get used to and put out a great paint job. Spend most of my time taping and masking off what I didn't want to be painted then actually painting. It took longer to get used to the 3-foot extension than shooting with the gun as is, but it sure came in handy with 10 ceilings. This worked flawlessly and was a sinch to clean up and put away. Worth the money spent.

Have nothing bad to say about Graco equipment. I have a small remodeling business and do a lot of painting. Have been using smaller Graco for years that has out worked what it was guaranteed. Plan on this being the last spray rig I buy.

I purchased this paint sprayed for several big jobs around the house (painting the inside and outside of two large sheds, priming and painting a large concrete basement that I use for a workshop and studio. I've only used it for latex paint, and clean up of the nozzles, gun, and hose after spraying latex paint is fairly straightforward. Setup of the sprayer for painting (literally priming the pump) is fairly straightforward. The key to longevity is definitely to clean up the hose, nozzles and gun at the end of each use. In use, it's pretty straightforward. You need to stop occasionally to reverse the nozzle to clear clogs. Long term maintenance, beyond cleaning after each use, means filling the hose and pump with winter conditioner and storing the sprayer somewhere where it won't freeze if possible. After several big jobs you'll likely need to replace the nozzle in the spray gun (you'll know). I feel like it's a cost effective tool compared to what you can do (volume and time) compared to what it would cost in labor if you hired someone to do the same paint job. You do use more paint when spraying than if you paint by brush so factor that in. Recommended.

Item was as described and fast shipping

I purchased this in sept of 2018. I sprayed some water through it upon arrival just to see how things work, and filled t with pump armor. Unfortunately my dad wasn’t ready to paint the inside of his house until feb 2020 and it just sat until then. Anyway, pulled it out, started spraying the first room and power started cutting in and out intermittently. To sum things up this happened through three rooms, and then we had to roll the rest of this house after loosing all power completely. I was pretty embarrassed after bragging how great this thing was going to be and it didn’t even get through the first job. I took it apart once I got home and did some testing with my multimeter. I pulled the front off and realized there was a broken piece of frame inside the transmission housing. There are two brass rods that the nylon piece slides up and down on and they are supported by a small piece of the frame. Mine was broken on the left side. I never had taken this apart until it broke so I know this happened at the factory. Unfortunately for me I’m just over the 1 year warranty period even though I never used this machine. All in all it seemed like it would be a good working machine. But the frame is made of cast aluminum and breaks easily, and can’t be repaired. I spent $600 on this machine and about $400 in clean shot valve, extensions, and fine finish tips. Now I’m stuck with a pile of useless parts because my machine broke on the first job. I contacted graco and really hope they work to make this right. I’m not a scammer and I worked hard for the money spent. Very disappointing to say the least. See photo for what I mean.

Es una maravilla y te agiliza mucho el tiempo pero por el tiempo que inviertes en prepararla y limpiarla vale la pena que vayas a pintar un área grande. En los videos de limpieza no te hablan de quitar un tornillo que está en la máquina y al cual se conecta la manguera, ese es importante sacarlo y limpiar el microfiltro que está adentro muy bien, yo limpie siguiendo los videos y eso no te lo dicen y con ese filtro sucio ya no puedes hacer nada. Da un poco de miedo aflojar ese tornillo pero si se puede

Es la primer máquina para pintar que compro y la verdad estoy muy contento porque te aligera el trabajo compré la boquilla 619 y la verdad me da 12" de sprayado, la verdad estoy satisfecho con el desempeño de la máquina, me gustó tanto que adquirí una segunda máquina, excelente compra...

Se adapta a las necesidades y alto rendimiento

excelente producto les agradezco

Una herramienta excelente, fácil de usar y los acabados son inmejorables, el ahorro tiempo de ejecución de material es una excelente inversión para mi trabajo