PC CASE ATX Gaming PC Cases ，Mid-Tower USB 3.0 with Double Tempered Glass Full View Computer Cases Black (Fans are not Included) (H6)

Es un excelente case muy amplio me llego sin problemas y puse hacer una buena gestión de cablesExcelente 10/10, lo único malo es que los fans viene pre-instalado alrevez, aparte de que no son de una excelente calidad pero me siento muy satisfecho. Saludos desde Rep.Dom

Case works great, saw some reviews having issues with the fans but I changed them all out anyways. One issue i encountered is fitting my 360mm AIO inside, it would barely fit on the top, no way it would fit on the side. Not sure if this is on NZXT making their kraken elite v2 a bit larger, or if it’s on the case for being a bit smaller than advertised… eventually it got squeezed in with a little bit of bending but we still got the side panel on. Just beware if you’re planning on getting a 360, 240mm would fit but obviously look much smaller unless you added another fan. Has a decent amount of space for cables, although by the end of the build things were pretty tightly packed. Nice open slot for the PSU. Got the job done so no serious complaints

Pros:Looks very nice.Comes with 9 fans.Fits ATX motherboards (barely)Airflow is good (if you switch all fans around)Cons:Cheap RGB fans.Cable management is a nightmare because of the limited space on the second chamber.All fans installed backwards.A bit bigger than the original design brand. Not a big issue but think you will need a bit of extra space on your table.No dust filter on the side (where the fans sit).Glass is a fingerprint magnet.Other thoughts:It is obviously a close design to a more expensive case, but overall, the look is great. The first thing that you will see is that all fans were installed backwards. So, I adjusted that quickly. Then my motherboard does fit, but the connectors at the bottom were very tight. I would recommend that loosen up the fans at the bottom first, then put all connectors, and then remount the fans. Tested IO at the front and it worked well.RGB fans are terrible. The do work, but you can tell that the brightness, led distance and light diffusion are not that good. In my case, my motherboard did not come with the 3-pin connector, so I had to use a controller. My air intakes are at the bottom and the side, and my exhausts are on top and back. Since I am using an AIO with 2 fans, I changed the 2 fans with the top 2 fans and moved the 3rd fan from the top to the back. So, airflow is good on the case. I wish it also had a dust filter on the side.So, overall, it is a nice case. Just be aware that you may have some extra work to address some of the issues. In my case, I was able to get everything working, and for less money than if i would have gotten the known brand case.

Moved my old pc parts into this car and water cooled it for my son. Came out way better than I expected

Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.

Most notably, you’re probably going to have to take all the fans out and orient them properly, especially if you’re installing an AIO liquid cooler. They all came installed as exhaust! So dumb! So i installed the fans that came with my IOA in the top as the same orientation so you could avoid a bit of work if you just have a stock cooler/ air cooler. BUT EVERY OTHER FAN U WILL HAVE TO FLIP AROUND. If you leave them as is, you will have massive dust problems because with all fans exhausting, air will come in through openings without dust filters on them. 9 fans 3 sets of 3 is just dumb in the fist place if you have 2 sets intaking and 1 set exhausting theres going to be a lot of positive pressure. I recommend also installing a fan at the back for exhaust, I used one from the top that i replaced with my AIO fans. I literally had to take out every single fan and orient it properly. Just a nightmare and a lot of extra work.Also cable management is quite the endeavor with this many fans. And you probably dont even need this many fans so you’re waisting a bit of money on looks.Oh and one last thing, the case is a bit smaller that i thought it would be, was a little tricky getting a full size ATX mobo in there.

Pc case came very well cable management was very good easy case to build in would recommend