Brabantia - Metal Ground Spike - with Handy Closure Cap - Corrosion Resistant Galvanized Steel - Ready to Go - Top Spinner - Rotary Dryer - Lift-O-Matic - Ø 45 mm

The Brabantia Metal Ground Spike is a practical and well-designed solution for securely anchoring your rotary dryer without the hassle of concrete. This handy accessory is a must-have for anyone seeking a stable and reliable setup for their Lift-O-Matic Advance or SmartLift rotary dryers. 🌀Crafted from durable and corrosion-resistant galvanized steel, this ground spike is built to withstand the elements and provide long-lasting support for your dryer. No more worries about your dryer toppling over or becoming unstable, even in windy conditions. 💨One of the standout features of this product is its hassle-free installation. Unlike concrete anchors, the Brabantia Metal Ground Spike requires no messy mixing or lengthy curing times. Simply drive it into the ground, and you're ready to go! 🔨 This makes it an excellent choice for those who value convenience and want to avoid the hassle of working with concrete.However, it's worth noting that while the ground spike is designed for stability, its effectiveness may vary depending on the soil conditions and the force of the wind. In extremely loose or sandy soils, or during severe weather events, additional anchoring measures may be necessary to ensure maximum security. 🌀🌩️Additionally, the ground spike's compatibility is limited to the Lift-O-Matic Advance and SmartLift rotary dryers with a 50 mm pole diameter. If you have a different model or brand of rotary dryer, you'll need to double-check the compatibility before purchasing. 🔍Overall, the Brabantia Metal Ground Spike is a fantastic choice for anyone seeking a reliable and convenient solution for anchoring their rotary dryer. With its durable construction, easy installation, and Brabantia's 5-year guarantee and service, you can enjoy worry-free outdoor drying for years to come. Just remember to consider your specific soil conditions and dryer model for optimal performance. 👍🌳

after 23 years the airer became wobbly because the socket had rusted away.the new socket fits the old airer perfectly. Unless the ground is hard and dry, you can drive it into the ground. Cut into the ground with sharp spade, then i probed the target spot with a steel bar a couple of times until i missed the stones or was able to remove them. Once the route was clear enough, then insert the socket and drive it in with a lump hammer onto a piece of scrap timber, which was shattered by the time the socket was flat to the ground.For someone else the installation was much harder. When the ground is too hard to dig, due to stones or concrete hardened clay, you need to buy a heavy lump hammer and steel spike and bash away, soak with water, until a hole is chiselled out of the ground, which is like a mining operation! Make sure you go deep enough for the socket - you won't have time to deepen it once the concrete goes in. Fill hole with water and pour in 2 bags of postcrete, which sets really fast, so you need to get the socket in fast, immediately, put in the airer, again immediately, and get it plumb, hold for a few minutes and have a rest.

The outside wings did not appear as per the diagram but it’s very sturdy and was easy to put in.

There are lots of these spikes on the market, Brabantia is the best in my opinion. Strong and effective.

Let me tell you, the Brabantia Metal Ground Spike is an absolute beast. It’s sturdy, well-made, and even comes with a handy closure cap that makes it lavish into the lawn but makes it easy to find again. Plus, it’s corrosion-resistant and galvanized, so you know it’s built to last through all the elements—rain, shine, or a full-on apocalypse.Now, let’s get to the fun part: installing it. If you think you’re going to tap this bad boy into the ground with a few gentle taps of a mallet, think again. Try hammering it into a summer-baked rock-solid lawn, and you’re in for the kind of workout no gym can prepare you for. I’m pretty sure my neighbors thought I was reenacting some medieval jousting scene with how hard I was going at it. Sweat was flying, mallet in hand, and I might have considered renting a jackhammer at one point.BUT once it’s in? This thing isn’t moving an inch. It’s like Excalibur, firmly lodged and ready to hold your washing line, parasol, or whatever else you throw at it. Once I finally got it into the ground, it was worth every drop of sweat. It’s now standing proud, and I feel like I’ve conquered something. **Great product**, but be prepared for a bit of a battle if your ground is as solid as mine. Just make sure to stretch first!

Holds rotary dryer securely Good strong item

Great item, needed a new one as am moving and it is difficult to get these spikes out of the ground again. So bought this one to replace it. Regretfully it was delivered without the red cap to cover the hole when not in use. A very usefull item when the spike is in in grass. There is no way to identify this issue and you need to return the item and order a new one.Got mine cheap so probably not worthwhile. The description of the item not correct, great item but not complete so therefore three stars only.

Last spike lasted almost 3 years split in half.these are easy to dig around to move and take out and move if in grass and airer starts to slant. Use piec3 wood over top of the spike to hammer in metal chunky mallet. Takes me a while replacing to a new one, being disabled to get it totally in the ground I have to take breaks. Takes me about 45 mins. You can buy one for concrete but I'd rather not fill my garden with concrete. I like this brand theircairers are good quality as are their ground spikes

It was a replacement for my clothesline. I returned it because it was too small, but it looked very sturdy!

Duidelijke handige richtlijnen voor de plaatsing

bon produit - à voir durabilité dans le temps

Das Teil hält wirklich bombenfest im Boden!Wir hatten vorher eine Verankerung aus Plastik, die in Boden "geschraubt" wurde - die hat zwar im ersten Jahr auch noch gut gehalten - aber aufgrund der Form hat sich die Konstruktion dann noch immer weiter über die Monate durch Wind und Regen geneigt (wir nutzen es für unsere Wäschespinne).Die längliche H-Form dieser Verankerung sitz einfach bombenfest im Boden und kann sich gar nicht mehr so neigen, wie eine einfach in den Boden geschraubte Halterung - sind höchst zufrieden mit dieser Lösung!Die Halterung besteht komplett aus dickem Metall (ausser innen befindet sich ein Plastik Mantel für die Halterung der Stange) und fühlt sich dadurch schwer und hochwertig an.Die Halterung kann ausserdem komplett bündig in den Boden geschlagen werden (war bei unserer alten Halterung auch nicht möglich).Dadurch kann ich die Wäschespinne aus der Halterung nehmen und einfach bündig mit dem Rasenmäher drüber fahren - sehr praktisch!Das einzige, worum ich mir bei dem Teil Sorgen mache, ist, wie ich es irgendwann mal wieder aus dem Boden raus bekomme :-D (Aber da muss dann halt die Schaufel / der Spaten rann)Achtung: Die Halterung wird in den Boden "geschlagen" - wenn ihr das mit einem Hammer (wie ich) macht, legt einen Schutz darüber (zB ein Holzbrett), sonst beschädigt / verbiegt ihr die Konstruktion.

Cumple su función