Printhead Cleaning Kit for Epson, 250ml Printer Cleaning kit for HP, Print Head Cleaning Solution for Canon, Printer Head Cleaner for Brother Inkjet Printers Nozzle

This is the second bottle I have bought. I use it every day with my epson L1800 DTF printer. It is very easy to use and it works great getting my print head unclogged and cleaned.

A neighbor of mine recently gave me two Epson Ecotank printers. An ET-3850 and an ET-2750. They had barely used either of the two printers, there were less than 60 prints made from them. This led to the print heads drying up as they set around.After running the standard 'Head Cleaning' and the 'Power Cleaning' feature built into the printers, it was not able to fully alleviate the issue, so after some research, I ordered this print cleaning kit. This job is not that hard to do, and for most people, if you can follow instructions on Youtube, and have steady hands, it's not that hard to do.The kit came with all of the things necessary to cover a multitude of different printers. The job was a bit messy, but by using the gloves that came with the kit, and a few carefully placed and folded paper towels, the mess was kept contained from the very start. Using one of the contained swabs to dab up a little leaked black ink / cleaning solution inside the printer was all it took to finish the job, reassemble it, and get it all going again!Once the blocked heads were fully flushed with cleaning solution, I had to run a number of 'black only' print jobs to get the print head to fill back up with ink. After that, my prints on both printers are coming out beautiful so that my art can be fully expressed!So, this little $14 kit brought life back to almost $800 worth of printers that my neighbors were just going to discard because they no longer appeared to work properly.

I used this to clean the print head in an Epson WF-7520. The kit has a lot of useful parts except for the plastic hose. It did not fit anything very well and would not fit at all on the syringe. The solvent worked reasonably well but did not completely unplug the yellow nozzle. Once I removed the print head from the printer it was much easier to clean. However, the print head still does not work right and leaves vertical lines on the print. I am not sure if that is the fault of the kit or if the print head is just past its useful life. The kit worked as expected but was not a miracle cure.This is a follow up to my original post. The vendor sent me a note and offered to give me a refund since I was not successful using the kit. He suggested a different cleaning method to try. I thought this was a very generous offer on his part. I have added a star to my first rating because of the good customer service. (The kit worked well enough for me that I think that a refund is not necessary).

* Worked for cleaning the printhead on our WF-7710* Required 2-3 syringes worth of fluid per nozzle* Did not require actually removing the printhead (just use paper towel underneath the carriage/printhead* look up how to videos on YT, particularly if you have an sublimation type printer (apparently these are prone to getting clogged printheads due to the ink/adhering method)* one video suggests warming the liquid* another video suggests you might leave the rubber tube attached to the nozzle for some time (probably for the detergent to work at breaking down the build up?* BCHTechnologies on YT has a video that explains in detail why sublimation printers clogeven after running the fluid through the nozzles I was still getting poor print quality. it improved after running a few test sheets but still wasn't back to 100%. I ran 2 or 3 print head cleaning cycles on the machine after this, and eventually got back to satisfactory print quality!Took about an hour overall but will probably take half that time for me in the future now that I know it will take multiple rounds of fluid and print head cleanings.

Forgot to leave a review that was long over due. The overall product worked and was good, however, the syringe they sent me was cracked...

After cleaning my print heads, my printer now works as good as new. This product is easy to use, recommend give this a try before calling out an expensive repairman.

I accidentally ran the cyan cartridge out of ink on my HP OfficeJet 6954. When I replaced all 4 cartridges with new aftermarket ones, the cyan would not print so I replaced them all again, but the cyan still refused to print.I tried cleaning the print head using HP's 3 deep cleaning maintenance processes several times but with no luck. I then tried a carburetor cleaner spray solution, which cleans the dirtiest of carburetors, but it did not work. I was about to give up on my printer when I thought to try this cleaner.Using the Osinkjet cleaning solution I went through a couple cleaning cycles where I cut up a terry cloth rag, folded and put it under the print head assembly to catch the fluid after it passed through the print heads. I also took all the paper out of the bin and put in another terry cloth rag to catch any fluid that dripped past the first cloth.After doing two cleaning cycles generously using the Osinkjet cleaning solvent, the cyan began working and soon worked quite well. This saved my printer, which was like new before it clogged up. This cleaner works, and you get 250 ml of solvent for the price of 100 ml's which is the amount most of the other sources provide.This cleaner is well-formulated and able to dissolve print ink better than some very powerful parts-cleaning fluids actually saved my favorite printer. This print head cleaner actually works!! Thanks Osinkjet!!

Stay Away Dont buy. It Kills the printer. I got this and followed all the instructions. Loaded the head and the cartridges and the printer give an error message and doesnt work anymore. Got to buy a new Printer. Terrible.Would be Minus 5 stars if possible