Late 2013-2019 Cadillac,Chevrolet & GMC NON Trucks and SUVs

This Magnaride strut bypass kit works exactly like it should. After replacing badly worn struts with some aftermarket struts, I got a "service suspension" light. The replacement struts had plug in sockets that connected to my original harness, but it still coded. I recalibrated ride height, and reset codes several times with the solution not lasting more than two drive cycles. (My old struts did not throw a message). I installed just one set in just the front. So two sets to completely eliminate Magnaride system. I did not do the rear, just the fronts. Instructions were very detailed, and the bypass installed easily, plug and play. It took me about a half hour, but I did not take the tires off.

I had the magnetic suspension removed and the shop added a bypass that was supposed to do the same thing that these do. I purchased these when I was getting a constant warning light about the suspension not working properly. I replaced one at a time and it fixed the problem after the second try. Worked great no issues and easy to install.

Worked great. No lights or issues with deleting the magnaride on my escalade

Pleased to see that these were made by hands of American vets. Plug and play, very straightforward

I URGENTLY NEED IT TO REPLACE THIS PART AND I WAS SENT ONE THAT DOES NOT FIT THE PLUG. IT CLEARLY NOTED THAT IT WOULD FIT A 2013 EXT AND IT COST MORE THAN THE 2012 OR LOWER MODEL, SO I PAID FOR THE 2013 AND IT DDIDNT FIT, MY CUSTOMER TOOK A PLANE FROM NEW YORK AND PLANNED ON DRIVING HOME. I HAD TO DISCOUNT THE VEHICLE 600 DOLLARS AND PAID FOR AN EXTRA HOTEL DAY.

Have a 2018 GMC Sierra Denali 1500. The longer “dumby” fuses worked perfect. I bought cheaper shocks that weren’t magneride and bypassed the computer. No lights on dash. A wire to a shock is so stupid. For anyone reading this that has a vehicle similar to mine you don’t need the ride height sensor part of this (the smaller ones). You just need the longer ones and you can buy just those for like 55 bucks.

Great value for the money. Other delete kits run upwards of $500. Only down side you don’t know if it will take until you hit 90 ignitions. It was easy to install.

Product worked as intended and their customer service went above and beyond. Quick shipping, too!

Not compatible with the 2016 Sierra Denali...it is compatible with the air ride system, not the MagnaRide system.

Installed on 2018 gmc Sierra Denali 1500 with no issues besides having a hard time disconnecting the plugs from the sensors. Installed bilstein 4200s on the rear and purchased complete kyb shock assembly for the front. Performed suspension zero trim after and milliamp reading for each bypass module fluctuated from 10 to -10. Truck is very smooth now.

Worked perfect with Yukon to delete the check engine light and get suspension light out.

Followed instructions and the service suspension message is gone.

Was really worried once I read the instructions and they said it might take 40 key cycles to clear any codes, but put them in and everything works perfectly. Put these on my 2015 Denali so I could use some better aftermarket shocks.