VG SPORTS8/9/10/11/12 Speed Ultra-Light Bike Cassette for Mountain Bike 11-40T/11-42T/11-46T/11-50T/11-52T MTB Cassette Lightweight Aluminum Bracket Cassette

I bought this inexpensive 11-46 11 speed cassette to see if I could use a 46 tooth large gear with my SRAM Rival 1 long cage. By adjusting the “b” screw, I was able to make it work but I had to add a spacer behind (between the cassette and the wheel) the cassette in order for the cassette to fit tightly and not have some slack between the gears. Once I did that, I was able to get into the 46 gear and up and down the gears. It is still a bit sloppy but that might be because I really don’t know how to fine-tune the shifting using the “h”, “l” and “b” screws and the barrel adjuster. But I am able to run from 11 to 46 and back down again, so for an inexpensive cassette, I am so far pleased. FWIW, only one ride so far, but did 20 miles and over 2,000 feet of climbing, with grades up to 15%.

Llego lo que pedí ya lo instalé y funciona muy bien

Good fit, good materials, nice color finish= Good value?

Yes this is less expensive than the SRAM PG-1230 12 speed 11-50T cassette and yes it looks cooler with silver and black cogs. HOWEVER, the 2nd and 3rd spiders are too close together causing it to be difficult to shift between 7th and 8th gear. It will overshift going towards 8th (smaller cog) from 7th and hop (go past and drop back down) when going from 8th to 7th. I found my SRAM GX 12 speed chain was dragging on the 7th (larger) cog when running on the 8th (smaller) cog. The solution was to add a shim (.7mm) between the two spiders. This was also observed on a Youtube video.

I have used the same mech since the late 90s, Shimano M951. It is the only mech ever produced by Shimano with a pulley cable guide and is also rapid rise. This made my 9 speed mech capable of 1x, and works flawlessly. I keep my old cassette and 3x kit in case of wildly carrying terrain, but other than, I couldn’t be happier.

I set this up with new Shimano Deore M6000 shifter and rear derailleur, as well as a new chain. I was unable to get it to shift from 10th - 9th after hours of trying. It would consistently stay in 10th, until it skipped over 9 to 8. I tried several adjustment, over and over. No joy. Choose a higher quality cassette.

Shifting is perfect with Microshift Advent 9. Wide range. Strong. Two aluminum spiders hold three gears each on the low side. This is important for use with alloy freehubs. Individual cogs will cut into an alloy freehub but the spiders prevent this digging in for the six low gears. The 11 and 13 cogs have thicker splines, which also helps. But the 16 cog stands alone so take it easy on that one on an alloy freehub! The real work is done on the low gears. We are indebted to VG Sports for producing this high performance 9 speed.

I bought this to replace a trashed XT cassette....1) it's half the price. 20it comes in groovy colors. 3)Lots of products are made in the same factory as name brands, but sold under the "generic" name for less money, so I figured I'd give it a shot. I'm a larger human that rides my bikes hard...lots of popping, jumping, tossing the bike around...my chains will generally last 1-5 months before it snaps. Teeth on chain rings get broken, and small cogs on cassettes tend to wear out. The XT smallest cog was spinning freely til I did a garage "fix" then the derailleur snapped and the cassette and a couple things got torn up. When i got this cassette my first look and it looks very similar to the XT.I"ve ridden it maybe 30 miles so far...some town riding(includes heavy torque and jumping over things, and a good trail ride). So far..shifting is good...no slips..nothing broken. If this gives me 6 months of my riding then I'll be very happy and buy another!

Bought this cassette as I needed a new one for my mountain bike and liked the color combo of this one as it matched the scheme on my bike. I received the product and was surprised at how many pieces there were to the cassette, they typically have fewer independent cogs. When I placed it on the freehub body I noticed right away that it was not a tight fit. I installed it anyway but could not get the gears to shift correctly no matter what I tried. Once I put on a Shimano cassette shifting was perfect. Would not recommend this product.

I used it to replace my old 9x3 speed shimano to 12x1. The color is really nice, will update you after using it if the color will fade fast and the teeth will deform. Overall, it's really good for the price, really easy to install!

El último plato rodaba con los rayos de la llanta por lo que era imposible acceder a el con la cadena, tiene muy mal planeado el diseño.Pd: Se ve increíble, me dieron ganas de modificarlo para lograr que entrara correctamente.

buen componente, estoy por montarlo en mi bici de MTB, el tiempo de entrega como siempre un dia antes de lo marcado en la publicacion, todo excelente

Lo compré y a los dos días los dientes no engranan.