Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch

Q: Do i need to use a threaded pipe on the discharge hole or any 1 1/2 pvc pipe (sched 40) will work?

Yes1) You will need a threaded pvc adapter. The threaded end fit the pump and glue 1 1/2" pvc pipe into the other end 2) Drill a small hole as per instructions on the vertical rise so the pump doesn't airlock3) I would also install a one way valve (check valve) on the vertical rise about $10 or so at Menards..........they are rubber and connected with hose clamps.Should work finethank youBill Sparks

Q: I'm replacing it and it says to drill a 1/8 inch hole on the extraction pipe but my existing one does not have one, do I still need one?

The pump itself has airlock protection built in, but nonetheless the instruction manual does still recommend a 1/8" hole be drilled (not far from the pump discharge) to prevent airlock, IF a check valve is being used (most modern sump pump installations do utilize check valves to prevent back-flow). For my particular installation, I do use a check valve so I drilled the 1/8" hole about 1" above the pump discharge on the PVC pipe. Haven't had any issues.

Q: Whatst the difference between this pump and 257-2? https://www.amazon.com/gp/product/b0057gu6tm?pf_rd_p=c2945051-950f-485c-b4df-15aac5223b10&pf_rd_r=

Cord length. The standard cord is 10 feet long. The pumps with -2 have a 25' long cord. -3 pumps have a 35' cord. -5 pumps have a 50' cord.

Q: I'm having switch issues with my "Z" 53 1/3HP pump so I talked to a Liberty rep today about sizing and he calculated everything and said that I am right at the middle of a 1/3HP (257) and a 1/2HP (287). He went on to say that both will have a tendency to "short cycle" in my situation (not a ton of water other than "100…

No way to answer without knowing how many feet of head you have. If "a long way" means 15-20' then go for the 1/2 hp. Up to 10' a 1/3 hp is plenty. If it short cycles it will wear out sooner and leave you unprotected from a flood, so bigger is not always better.

4.6/5

Product ID: 418608433

Secure Transaction

Details

Brand
Liberty Pumps
Colour
Gray
Material
Cast Iron
Style
Submersible
Power Source
Battery
Item Weight
15.2 Pounds

⚡40% energy savings

💧50 GPM flow rate

⬆️21 ft lift height

Frequently Bought Together

Liberty Pumps 257 pump, gray, 1-1/2"

Zoeller 30-0181 PVC Plastic Check Valve, 1-1/2 Inch

Sump Pump Platform

Description

🚀 Elevate Your Drainage Game!

SOLID HANDLING - Effortlessly manages 1/2-inch solids, making it ideal for various effluent tasks.
ENERGY EFFICIENT - Innovative motor design reduces electrical usage by up to 40%, saving you money.
COMPACT RELIABLE - Equipped with a VMF switch for smaller pits, backed by a 3-year warranty.
HIGH LIFT CAPABILITY - Achieves a maximum discharge head of 21 feet for versatile applications.
POWERFUL PERFORMANCE - Pumps up to 50 gallons per minute, ensuring rapid drainage.

The Liberty Pumps 257 is a robust 1/3-horsepower submersible sump/effluent pump designed for efficient water management. With a maximum flow rate of 50 GPM and a lifting height of 21 feet, this cast iron powerhouse is perfect for both residential and commercial applications. Its energy-efficient motor reduces electrical consumption by up to 40%, while the VMF switch allows operation in smaller pits. Backed by a 3-year warranty, this pump is built for reliability and performance.

Specifications

Brand	Liberty Pumps
Colour	Gray
Material	Cast Iron
Style	Submersible
Power Source	Battery Powered
Item Weight	15.2 Pounds
Maximum Flow Rate	50 Gallons Per Minute
Maximum Lifting Height	21 Feet
Voltage	115 Volts
Global Trade Identification Number	00671812002577
Manufacturer	Liberty Pumps
UPC	671812002577
Department	womens
Item model number	257
Product Dimensions	24.38 x 24.38 x 26.67 cm; 6.89 kg
ASIN	B001PTT5JM

Have a Question? See What Others Asked

Do i need to use a threaded pipe on the discharge hole or any 1 1/2 pvc pipe (sched 40) will work?

I'm replacing it and it says to drill a 1/8 inch hole on the extraction pipe but my existing one does not have one, do I still need one?

Whatst the difference between this pump and 257-2? https://www.amazon.com/gp/product/b0057gu6tm?pf_rd_p=c2945051-950f-485c-b4df-15aac5223b10&pf_rd_r=

I'm having switch issues with my "Z" 53 1/3HP pump so I talked to a Liberty rep today about sizing and he calculated everything and said that I am right at the middle of a 1/3HP (257) and a 1/2HP (287). He went on to say that both will have a tendency to "short cycle" in my situation (not a ton of water other than "100…

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

€ 1519.88

Duties & taxes incl.

Cyprusstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App