Tyger Auto T1 Soft Roll-up Truck Bed Tonneau Cover Compatible with 2009-2018 Dodge Ram 1500; 2019-2025 Classic | 5'7" (67") Bed | TG-BC1D9018

Got this for my 2025 Ram 1500 with a 5’7” bed. It fit perfectly and was easy to install with just a wrench, screwdriver and a knife (knife to cut weather stripping). Took about 15 min to install and was probably the easiest tonneau that I’ve installed. Packaging was nice, instructions were simple, the cover looks good and seems sturdy. Time will tell if this was a good purchase but first impressions are positive. Installing it was easy to as I said earlier and can be done by 1 person since the railing sits on top of the bed rails. The track (rails) of the cover come with weather stripping installed but they provide 2 additional foam strips should there be a height difference between the bed rails and the front of the bed near the cab. Driving with it I didn’t notice any extra noise even at highway speeds (70+ MPH). The latch is a bit different than other covers that I’ve used in the past an instead of a latch on one side there is a cable that can be pulled from either side. The supports that are attached to the cover have a slight bow to them that should aid in shedding water . The cover has a curve in the edge closest to the cab that matches the shape of the bed and cab.

First off, this is my second tonneau cover from this specific manufacturer. And no, not the second cover for the same truck....this is the one I bought for my current truck. My first one was for my 2013 short bed Ram 1500 I bought 9 years ago. That tonneau cover was still in good condition when I traded the truck in three weeks ago. The quality of these tonneau covers is excellent! Given how my previous cover lasted 9 years in the wide ranging weather that Ohio throws at us....from 90+ degree summers, high winds, to -10 degree winters with 6+ inches of snow sitting on it. My previous cover held up exceptionally well with regards to the vinyl, the stitching, and clamping and fitment. The steel cross bows always stayed firm, allowing water to run off and never shifted or came loose. Literally, the only thing I could possibly complain about was the rubber weatherstripping that was adhered to each of the last two sections of the tri-fold cover (meaning the two rear-most sections that actually fold forward on top of the front section). Those individual pieces of weatherstripping on each section eventually came partially unglued and would hang off the sides of the frame. Mind you, this was probably 5 or 6 years into owning the cover, which was used nearly on a daily basis. Thankfully, they were easy to reinstall using a little adhesive spray. Regardless, the tonneau cover always kept the water/snow/debris out of the bed and looked and worked great for 9 solid years of use. Now, onto this newest one. The latest one that I bought....which is for my 2011 Ram 3500 crew cab, (8') long bed dually. Some improvements were made to this cover over my previous one. First, this new tonneau cover has additional safety straps that clip to the bottom of the bed rail in the same area as the forward-most clamps that hold down the front of the cover. This ensures that if one of the front clamps were to somehow come loose, the tonneau cover won't simple fly off the truck! A nice feature! Second, when the cover is folded forward, there are two plastic connectors that clip in place to keep the tonneau cover from unfolding from it's forward (folded) position while driving. On my old version, each end of the plastic connectors (male and female ends) were on short straps that you'd have to fish out, line up and connect. On this new version, the female connector is riveted to the forward most section of the tonneau cover frame near the cab window. The male connector is still on a short strap. This allows one-handed connection of the strap on each side of the cover! A nice little upgrade! I'll gladly post a long term update in the future (hopefully in another 9 years 😂). But in my opinion, you can't go wrong with this amazing tonneau cover! When you install it, make sure to take the time to measure and ensure you are centered side to side so the seals land equally in the same place on each side bed rail. Then, do the same front to rear before clamping down the forward-most clamps. This ensures that each seal has a rail to land on which keeps your bed dry. Sorry for being lond winded. I really hope this helps somebody!

I am very pleased with the product at this price point. It was as advertised, fitting very well, easy to install, and looking really nice when done. It's a nice addition to my truck.

The cover fits well and looks very nice. It is very easy to install and remove. Only gave it 4 stars because the rear seal makes the tailgate too tight and it takes some effort to open it. I am hoping that it collapses some over time but it will be an inconvenience until then. I think the manufacturer should install a narrower rear seal to prevent this from happening. Other than that, it is a really nice cover.

This fit my 2022 ram 1500 big horn built to serve. I love how its low profile and i think i might be able to even install a headache rack with this cover. so far its holding up to all the weather Florida has to throw at it and i feel this will last longer than a vinyl one. water rolls right off this so its def weatherproof. functions perfect and was easy to install. all the hardware was included with easy instructions. def is thick enough and the latch is easy to use

This Tonneau cover is very easy to install and great for your truck bed. It keeps everything in the bed dry and out of the weather. It's also very easy to adjust. I highly recommend it for your truck.

I was very skeptical because everywhere I looked they charged upwards of $600 to $900 for a tonneau cover and installation. Took a gamble and ordered this one for my 2025 Ram 1500. It did not disappoint, came in two days, and took me less than 45 mins to install it on my own. I did have to adjust the latches to make it straight and completely seamless, but overall, extremely easy to install, and looks great. Highly recommended!

Arrived early in excellent packaging, installed in about 30 minutes (instructions were spot on). It fits wonderfully. I have already taken it out at interstate highway speeds of 80mph...no problems! I would highly recommend this product. Buyer, make sure you purchase the correct cover for your make/model/year of Ram truck! ...and it just survived a 2595-mile, round-trip drive from Lawton, OK to Fort Bragg, NC and back. No issues, no damage, no problems!

I recently installed the Tyger Auto T3 Tri-Fold Truck Bed Tonneau Cover on my truck, and it has been a fantastic addition! The cover is made of heavy-duty marine-grade vinyl, which provides excellent durability and protection against harsh weather conditions. The tri-fold design allows for easy access to the truck bed while maintaining security for my cargo. The installation was straightforward and required no drilling, which was a huge plus. The cover fits snugly and securely, and the weather-sealed edges keep my cargo dry. The sleek and aerodynamic profile not only enhances the appearance of my truck but also improves fuel efficiency.

This is a great product, Install was a breeze (6 clamps to install). Zero fitment issues. Top and hardware seem very well made. Can drive 800km on hwy 401 @119km/hr with no issues or worries of clamps coming loose or top flapping too much. Great product for the money. Installed on 2021 Ram Bighorn Crew Cab (New Generation)

La instale y salí de viaje, durante el viaje me llovió y todo el equipaje quedó resguardado del clima sin problema! Además de que se ve muy bien en la camioneta

Perfect fit and easy to fit

I love it, it is easy to roll up when needed. perfect so far, we will have to wait till winter comes and see if it stays dry. Excellent price, and easy to install. Thanks Amazon