VEVOR Stainless Steel Prep Table, 24 x 24 x 35 Inch, 440lbs Load Capacity Heavy Duty Metal Worktable with Backsplash Adjustable Undershelf & 4 Casters, Commercial Workstation for Kitchen Restaurant

From the picture this looks like a sturdy item you'd find in a workshop, lab, or professional kitchen. In fact it's somewhat flimsy, with the surfaces and tubes of stainless steel made from the thinnest possible sheets. The two leg tubes fit together with friction holding them—or not; one bottom leg piece fell out when I flipped the table upright. "Heavy Duty" in the item description seems like an overstatement.However, I'm giving it five stars because it's working perfectly for me. I removed an old electric range from an ADU and wanted to replace it with inexpensive counter space. This table is exactly the right size to replace an in-counter appliance and looks terrific when installed. I put a mini-fridge underneath it (clearance 33" with table feet extended), so I didn't use the lower shelf piece. The tight spot I squeezed it into provides ample stability for the table.Easy assembly; by far the most difficult part was peeling the protective plastic sheet that covers the top surface (hard to get an edge to start with).I'm not sure this would be suitable as a high-usage kitchen table in a freestanding location. Would probably be OK for infrequent usage, placed in a corner for more stability.

Putting together this table left me with hands full of metal shavings. The table is not sturdy, terrible quality, dented and scratched on delivery, came with no instructions, and is cheaply made overseas. Upon request for refund I was told to list paragraphs of information to be considered for a return (I am not taking this thing apart) or a refund. Sellers like this should be black listed from Amazon completely.I WOULD STAY FAR AWAY FROM THIS BRAND AND SELLER.

I don't know what was more frustrating, a leg being bent or removing the plastic protective coating, but putting this together was a pain. But once it was together, WOW! Sturdy, large wheels that easily roll, easy to use wheel locks, and stable worktop. This cart is a dream.

From the images and my previous purchase of a workbench from the Vevor brand I assume the quality would surpass my expectations. Unfortunately this was not the case as the table feels rather fragile and cheap. Given the price I guess I should have expected this but I expected more from this brand. Granted it works, but much more is desired from this product.

Every piece was shrink wrapped in plastic. Almost took me longer to unwrap them all than to assemble item...almost.This is a project which would benefit from an extra set of hands or even just one extra. I managed on my own...i've done alot of assemble yourself stuff.For the price the quality is fine - the main function will be to hold my large microwave. The tops of my shelves are enameled white...........will be interesting to see how that paint layer holds up.

Very misleading description in the headline for this table, it says for Commercial Workstation for Kitchen Restaurant. In the photo, it might look like one, but this would not last a day in a real commercial kitchen.As other comments have stated, this unit is paper thin, if you were to put your foot on the bottom shelf, say like to tie your shoe, it will fold in half. There were several super sharp spots that could cut someone easily, I had to file a lot of spots, even one of the welds had a very sharp edge, and one weld was bad, it didn't even hold the 2 edges together, all of the weld was on one side of the joint. The legs were so thin, when I squeezed them between my thumb and finger, they bent! Sadly, you can't actually use the nuts on the wheels to tighten them down, as they are recessed in the legs, but I doubt you could tighten them before it would start spinning in the leg. While trying to remove the protective plastic wrap, all under the bottom of the tabletop, it looks like it was painted with silver paint, which did not dry, and everywhere I touched it, it stuck to my fingers/hand. After you put this together, if you try to lift up the table, the legs fall apart. If you have employees or kids, this is not for you! While it did come with a 5mm hex key to tighten the bolts, you will need a 12mm wrench/socket or some pliers to hold the nuts on the bottom shelf. The headline should be corrected to say, for very light duty.

Easy to put together. They are a lot lighter than I imagined but they are super sturdy. The shelf underneath holds my appliances and it's within easy reach.

works great for my heat presses

If you need a commercial grade table, this is not it. Very light weigh gauge stainless, easily bent.

thin metel

I found the assembly instruction images a bit hard to see, but the table is a nice solid table and rolls very easy.

I purchased this table to keep a hobard slicer in a residential kitchen. The table comes well packaged in a manner that would guarantee its survival in the shipping world. From the description I believed the table to be of a heavier gage and capable of withstanding the rigors of a home kitchen. the table assembled easily, and looked ok, upon closer inspection the surface was scraped and dented presumably from the packaging process. The table is under whelming, very light gage even for a home kitchen, susceptible to bending, denting and rattling with a mixer or slicer. It is not a NSF rated table and only appears to be of industrial quality, the wheels are a nice feature but the unit is hardly sturdy enough to use it with the rated weight on a tiled floor. To reiterate, very light gage, sharp edges poorly finished, may not last for any continuous use, great for very light use as a food or plate cart that remains stationary.

Nous l’avons acheté pour mettre une plancha.Le produit correspond au descriptif.Cependant les finitions (plaquage et angles) laissent à désirer