Paccel include:

4× Nema23 23HS8430 stepper motor 76mm 3A

4× TB6600 stepper motor driver

1× 4 Axis USB Mach3 control board

1× USB Cable

1× CD disc

1× 350W 24V DC switching power supply

Nema23 Stepper motor:

* Motor Type: Hybrid Stepper

* Step Angle: 1.8 deg.

* Holding Torque: 1.8Nm (270oz.in) 18kg.cm

* Phase Resistance: 1ohms

* Rated Current/phase: 3A

* Inductance:3.5mH+/-20%(1KHz)

* Frame Size: 57x57x76 mm

* Number of Leads: 4

* Weight: 1.1kg

* Shaft:8mm diameter single shaft

* Wiring:

A+ : Red ; A- : Green ; B+ : Yellow ; B- : Blue

TB6600 stepper motor driver 4.5A

The working voltage is DC 10V-45V.

The rated maximum output reaches: ±4.5A.

Suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A.

Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.

Mach3 USB motion control board 4 axis

It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.

Feature:

This USB motion card does not need install any USB driver,Windows2000/XP/Windows7/8,can directly identify.

4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.

Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.

4 general-purpose opto-couplers isolation input

350W 24V DC switching power supply

DC output: 24V 0-14.5A ; AC input voltage range: 115VAC/6.5A/50HZ or 230VAC/3.4A/60HZ; Selected by switch

CNCTOPBAOS 4 Axis Nema23 Stepper Motor USB Mach3 CNC Kit,270oz-in 76mm 3A,USB Controller Board Motion Control Card,TB6600 Driver 4.5A 24V for CNC Router Milling Engraving Machine