PLEASE Note:
1. Please follow the connection diagram carefully to avoid short circuit;
2. After the wire is connected, first charge to activate the protection board.
3, When connecting 4 batteries in series, please make sure that the voltage of each battery is the same. If not, please full each battery separately and use it in series. In the discharge test, the battery with the fastest voltage drop was the bad battery.
4. Do not mix good and poor batteries. 4pcs battery capacity / internal resistance is as close as possible.
(2 good batteries + 2 bad battery = 4 bad batteries).

Specification:
-Discharge
-Continuous Discharging Current: 100 (MAX) A
-Instantaneous Discharge Current: 120 A
-Charge
-Charging Voltage: 14.8 V
-Charging Current: 10 (MAX) A
-Overcharge Protect
-Over-charge Detect: 3.75 ± 0.05 V
-Protect Delay: 1300MS
-Over-charge release: 3.6 ± 0.05 V
-Balance
-Detect Voltage: 3.60 ± 0.05 V
-Release Voltage: 3.60 ± 0.05 V
-Balance Current: 58
-Over-discharge Protect:
-Over-discharge Detect: 2.0 ± 0.08 V
-Over-discharge Detect delay: 145 MS
-Release Voltage: 2.3 ± 0.1 V
-Over-current Protect:
-Detect Voltage 200 mV
-Detect Delay: 20 mS
-Current Detect: 120 ± 10 A
-Release Condition: Cut Load
-Short-circuit Protect
-Protect Condition: Load Short Circuit
-Detect Delay: 300 uS
-Release Condition: Cut Load
-Temperature Protect: / / ℃
-Resistance
-Inner: ≤20 mΩ
-Self-Consumption
-Working Current: ≤30 uA
-Sleep Current (when Over-discharge): ≤20 uA
-Working Temperature
-Range: -20 / + 80 ℃
-Size: 70 * 60 * 8.5mm

Package Includes:
1 Piece Battery Protection Board
If you have any question, please feel free to contact us.

LIVISN 3.2V 4S 100A 12.8V 14.4V LiFePo4 Lithium Iron Phosphate Battery Protection Board with Balance Over-Current Over-Charge Over-Discharge Short-Circuit Protection(3.2V 4S 100A)

Details

Description

Common Questions