Liquid Bearings, 100%-synthetic oil for all HO scale slot cars, makes cars faster!!

Works great for cassette deck repair or anything requiring oiling bushings or bearings. Has 2 length feed tubes for hard to reach spots. I rebuilt my cassette deck and it works very nice. Not too thick or thin. Would definitely recommend for anyone restoring vintage audio equipment.

My Pioneer RT-701 reel to reel machine was having a horrible problem of wow and flutter. I took the whole machine apart and cleaned and lubricated all parts. But it didn't seem to help at all. The pinch roller is in great condition, not dry or bumpy, but still I was getting bad speed fluctuation. As a last resort I got this oil, not expecting to fix anything. I was so surprised that after removing the oil silicon lubricant I applied to the pinch roller, and applied just few drops of this liquid bearing oil, the wow and flutter completely disappeared!! The deck was back to its original steady sound, no more speed variations! I am definitely sticking with this oil from now on for lubricating all precision parts of the RT-701, and two of my other tape decks that are having similar problem. Get this product. It works!

Excellent quality and very fast shipping

This stuff works!! I have AFX track. Was testing which of my 1:64 HO cars was the fastest. Set up a loop of about six something feet, with the AFX digital control center (the newer one with the red yellow green light and timer/lap function) telling me when to go and when I hit 20 laps (at which point the timer stops). I have those neo-something rare earth magnets on my cars so the cars stay fixed to the track. At about six feet, I am able to run the cars full throttle from the start without them flying off the track. The fastest I got was about 17.54 seconds with my TYCO 440-X2. So seeing this lube still in the package and lying on my floor, I decided to try it out and see if the claims were true. I added a dab to each on the four points where the front and rear axles snap into the plastic frame, and on both axle ends of the dynamo. Basically, I was trying to reduce the friction where the metal parts would spin in the plastic housing. I ran the car again. Dropped two seconds! Dang! I ran the car again to be sure that I had not jumped the gun. Same results!! Impressive. I added this to a few other cars and now they were too fast to stay on the track. Mind you, with the little bit I added, this one bottle should last you a lifetime. I could not have added more than a drop total. Maybe...maybe 1/3rd a drop total. Lastly, the applicator cap that comes with it is nice since it gets in those small places and allows measured amounts. In addition, it also comes with a longer applicator syringe (substitute attachment) which is about 2.5 inches.

Works

It works well as an electronics lubricant but I find it tends to spread to other components with a mind of its own.

I really liked the needle applicators that came with the product and the lubricant is superb. What I disliked is the shipping packaging. The bottle came in a sealed product bag inside a shipping bag with the short needle attached. There is no solid cap to seal the bottle. During shipping the needle applicator hub was broken as the shipping bag provided little if any protection. The bottle was now opened and about 1/4 of the bottle content leaked out inside the product bag. A shame that poor packaging spoiled a good product. I am very disappointed.

It's oil with two tube applicators. duh.