Fire Pit Burner with Pan

The table we purchased for our deck has a square lift out section in the middle that is perfect for this burner. It is a little smaller than the hole so it was necessary to add stainless steel strips around the edge to hold up the burner. Add fire glass and glass windscreen and it is very nice to sit with a glass of wine and toast marshmallows very carefully. (gas is not as marshmallow friendly as those glowing campfire coals.)Unfortunately the control on the propane hose to the tank is VERY touchy (not part of the fire pit package although it was suggested on Amazon when purchasing the fire pit) The control will need to be replaced / upgraded for safety.

Works exactly as you'd expect and was simple to install. I bought 18 pounds of fire rock, and had about 3 pounds left over, so 15 pounds should do it. Also, the recommended 1/2" propane adapter fitting does connect to the fitting on this fire pit, but it will NOT fit the hose they recommend. You will need a 3/8" male flare to 1/2" female "reducing" fitting to get the hose to connect to the propane fitting. I wish Amazon had told me this, I needed to run to the hardware store for that fitting. I would also recommend an ignitor. This works fine with a lighter, but an ignitor would be handy and they are cheap.

The media could not be loaded. Im so impressed by this burner and pan. The corners came a little bent, and the material isnt the thickest, but it is sturdy and beautiful. The pan insert is a true 36" square with a 1.5" lip.The quality is fantastic and is a fraction of the price of competitors. I bought the bundle with the stanbroil valve and ignition and have less than $500 in the fire pan, and less than $300 in block.If you use flex, you will get a whistle. The whistle free line they suggest works, but is too short. So i built most of mine out of galvanized. The 36" burner kit puts out a great amount of heat and takes a lot of lava rock/fireglass. I used a small base of black fire rock and will add glass later.I cant say enough good things about this kit. The video and pics are of half way turned up.

Works, but flames are too small and on high the slightest wind can blow them out. Using natural gas hookup.

The media could not be loaded. Really nice stainless steel fire pit. I bought the 36” pan. Nice flame and overall good build quality for the price. My one complaint is it only has a 1/2” inlet when it claims to be rated for 400 thousand plus btu but only at 0.5 psi. It’s pretty hard to find the fittings needed if using a turn valve to get over 300 thousand btu. Regardless it’s still really nice and very warm.

Worked perfect

This is such a great idea. It fits perfectly in the table we already had and has way more heat that what you would buy in a gas fire pit. Plus it’s convertible and can do propane tank or natural gas. Much cheaper way to have the fire table that we were wanting and we absolutely love it!

This is 24"x24" but.....it has about a 1/4" 90degree flange turned down all the way around the outside, so it is NOT flat. If you sit it between your blocks, it causes your blocks to have a gap. This did not work for my installation, so I returned. Honestly, cant think of an install that it would work for. It is good quality, I just had to order the one that is a 2" pan with a flat 1" flange all the way around so that it will slip under my blocks.