House Tuning 1.5 inch Tube Clamps Bar Mounting Bracket

I used these to attach a 37lb awning to the stock FJ Cruiser roof rack. With a little planning and aluminum bar stock, I ended up with a nice clean installation that I can quickly detach and reattach. Took the rig off-roading and camping for 3 days and the awning didn't move. Most folks just leave their awnings attached and I did not want that. The matte finish is great and the rubber lining kept my roof rack from getting scratched up. I was not a big fan of the Alan head screws. They were a little hard to tighten and the screws seem like they should be larger diameter. Other than that, this is a great product and great price compared to other similar items.

El material de las piezas exelente 👌

Mounted to my side by side cage easily.They hold as I need them too.I would purchase again.

Fits good and is solid, seems like it could hold a lot of weight but I just have a fire extinguisher mounted to them so far so i cant say for sure

bought this to add lights to an ATV the length of the banner(attachment area) and description of product is to add a piece like a strap between clamps to add lights, tools etc. I used them and drilled through and slotted the clamp to put marker lights on them individually. The mounting flange pinch clamp i torqued to 43 inch lbs, and it is very solid. this is with the rubber shim stock installed to make 3/4" -19mm size. I drilled #29 wire gauge and tapped 8-32 threads and attached lights. The clamps have what appear to be stainless screws W/lock washers. This is a product i will purchase again. The top screw of the light i drilled on the edge of the clamp screw with out a total hole the bit came out the contact surface of the cap to the body and i tapped threads all the way through from the outside of the clamp to the inner diameter and only have about 1/8 inch threads and was able to tighten the screws up tight enough to not worry about light coming loose, lots of meat there.

So...I measured my tubing and came up with a sizing of 1.75" exactly. That being said, I ordered the 1.75 clamp thinking it would fit based off the description. NOPE. The clamp itself without insert was too big, and the clamp using the rubber insert was too small. I tried using half a clamp and that didnt work either. Nothing was making this '1.75"' clamp fit around my 1.75" tubing.So I wrote to the company and they very simply explained to me that they have 2 sized clamps and the only difference between ordering the different sizing is the 'rubber inserts' that are included with the clamp you choose.That was very simply put, and makes sense, but to be honest...I did not gather that conclusion based off their descriptions.Anyway...I decided to write to Garvin ( the makers of the rack I have on my Jeep) and they confirmed their sizing to be 1.75". Still, was not adding up. So I bit the bullet and just decided to order the 1.85" clamp. This time, the item arrived in 2 separate boxes and was stuffed with every sized rubber insert, unlike the 1.75" clamp I ordered. Im not sure if the company noticed I had a sizing issue and decided to be kind enough to do this when I placed a second order, or if there is just some weird packaging issue they have within their company, but I am glad this occurred, because the only I was able to get a secure fit after trying every insert (1.65, 1.75, 1.85 and 2" inserts), was by using one half of a 1.75" rubber insert, and one half of the 2" insert. Any other combination and rubber inserts was too big or too loose.That being said...its very wonky sizing somewhere on their end, and would end up having someone having to order more that one set of clamps just to get the additional rubber insert sizing..??The clamps themselves seem very sturdy and good quality (4 STAR), but would be nice if they included some other fitting solution as to make the ordering experience less painful (-1 STAR)

This would be a good product for mounting lights to a hoop on your bumper or maybe to mount things on exposed tubes on a SXS. The problem I see is with the design. The screws are on the opposite side of the clamp from where you mount whatever on it. In my case I wanted to use these to mount things to the cage inside my jeep along the dash and with the screws on the back side away from the arm that you mount your accessory to, I found them nearly impossible to mount on the cross bars.

First off, these were an awesome value for that price. I was impressed with the quality for one, but the included rubber shims are awesome too, which I did use. I bought these to relocate my fog lights on my bike down onto the fork tubes, and ended up using the second set to mount the directionals as well. Wasn't expecting these to be so good, but they are very rigid, nice rubber shims as I mentioned before, and very well packaged. Each was individually wrapped in the box keeping them absolutely pristine and scratch free. My camera sucks, but these really did work great for what I needed them for. Would highly recommend and actually plan to order a couple more sets just to have on hand Incase they're not available for my next build.