UES FFR24: Full Frame Camera Cleaning Kit 14pcs Sensor Cleaning Swab and 15ml Cleaner Compatible for Sony Nikon Canon FF CCD CMOS Clean

This kit was very easy to use and quickly got rid of dust on my sensor. There were a few annoying dust spots on my pictures, so I figured I'd give this cleaning kit a shot. This was my first time cleaning a sensor so I was a bit nervous at first, but it performed remarkably well and managed to clean all the dust off on the first try. As far as I can tell, even with the cleaning fluid it left no streaks, and the usual stopped-down dust check confirmed the sensor was spotless.The swab is pretty much perfectly-sized for a Canon full-frame DSLR, and it easily covers the active sensor area in a single pass. The kit comes with a bottle of cleaning fluid which feels like it would last hundreds of cleanings since you only need to use a couple drops each time. The swabs feel well-made with just enough "give" to reassure me I wasn't going to put too much pressure on the sensor. They're also individually vacuum-packed so you always start with a fresh swab.These swabs are also good for cleaning your mirror (though it should go without saying that this doesn't help your image quality in any way). It's usually not recommended to do this too much, but it feels better to use this swab than using your finger with a microfiber cloth and risking poking the delicate focusing screen.Overall, this did exactly what it said on the box, and ended up being really easy to use.

Worked great on cleaning my long neglected sensor. It was so dirty I had to use a couple of swabs but now it's perfectly clean. Lots of YouTube videos showing how to clean you sensor.

Used it on my Sony a7iii and it worked great. No issues and easy to use.

I noticed that these swabs are short by about 1-2mm and aren't able to cover the entire height of my sensor (Sony A7iii). I don't think it's advised to double swipe since you can technically redistribute dust once the swab is dirtied up, but I did precisely that: two left-to-right swipes -- one swipe up top and one on the bottom to cover the sensor area it missed. I could see this being problematic if, like a squeegee, it shovels off solution or dust along its edge. Didn't happen on my first go but it still doesn't feel great.I added a stretched photo of my before & after using just one swab's front and back side. It cleaned all of the motes but introduced one in a corner; that's fine. I used the Altura spray solution from their own sensor cleaning kit.

I used these for my Nikon D600 witch was notoriously known to have oil on the sensor since it was released! Mine had this problem since I bought it and I just had to stay away from shooting at too high of an aperture but any long exposure high aperture photos I'd be spending a huge amount of time getting rid of all the spots.Used this after owning this camera for YEARS (10+years) and it immediately and easily solved this! wish i would have gotten this back when i bought the camera!!!Super easy to use and only needed one swab. Now I have plenty for any other time I'll need to clean my cameras sensors!

Works as should, no complaints..

My Lumix S5 ii camera sensor had dust and some deposits on it, which a blower would not remove. I noticed spots on my nighttime, street, 14mm, f11 photos. I ordered this kit, after watching the many YT videos explaining how to clean a sensor..I turned off the IBIS in the menu and left the camera turned on to lock the sensor in place before using the swab. It's important to ensure you do this to avoid damage to the IBIS mechanism. When you turn on the camera, you'll see the sensor shift its position slightly and lock in place..The swabbing is simple and not that difficult, or scary, if you are a competent DIY'er or a professional engineer, like me! The sensor has a glass top layer and one YouTuber demonstrated that the glass is not easily scratched. That doesn't mean you shouldn't treat the sensor with care and you should only use the swab once!.The real secret sauce is the cleaning fluid. I've tried wiping the sensor where residue was with a folded Zeiss lens cleaning wipe, using the edge of the wipe like the UES swab. The wipe's alcohol leaves a film behind. The UES sensor cleaning fluid is much lighter and evaporates almost instantly with no residue..I used one swab, two drops and two wipes across the sensor glass and my sensor was looking like new. I reset the menu for the IBIS and was back in business..At $16 (at my time of purchasing) for the kit of 14 swabs and 15mL of fluid, this is really good value. The kit will last me a very long time.I try not to change lenses unless I'm in a clean, dust-free environment and the in-camera sensor cleaning function and a VSGO filtered-air blower usually does the trick.I'm sure I'll have cleaning solution left over by the time I've exhausted the swabs. You never use more than a couple drops per swab. So. I'll probably just have to buy a pack of swabs next time..No hesitation recommending this UES FFR24 DSLR and Mirrorless Full Frame Camera Sensor Cleaning Kit.

Even tiny specs of dust/dirt on your sensor will leave dark splotches on your digital pictures. Follow the directions with this kit and your splotches will disappear!I bought a used mirrorless camera and had those splotches in my pics. The company actually traded the camera for me but the replacement also had the similar condition and they wanted to charge me $70 to clean the sensor that they reported was in perfect condition when they sold it to me. I was scared to touch anything to the sensor but decided it was worth the try.Well, the cleaning was perfect and I am no longer afraid to do the job myself. Having this kit and a rocket-blower is all you need to maintain the picture quality you deserve!Note: there is much more liquid than you'll need with the pads, so when you use all the pads, you only need to buy a new set of pads-only and can keep using the liquid cleaner provided with this set.