YSTOOL Professional Brake and Clutch Fluid Pneumatic Vacuum Bleeder Machine Kit

Worked great for my 2000 F150. I set the regulator on my compressor to 40 PSI and the regulator on the bleeder tank to 25 PSI. No issues with leaking. The only thing I wish it had was a bleeder valve next to the master cylinder to fill the hose. A work around is to crack the valve next to the master cylinder with the supplied cap loose for the air to escape until fluid is primed. You can then tighten everything down and bleed your brake system.

bought this oct 23 it is now dead, haven't tried using it for several months do not know how long its been dead.first the main hose is toast tried repairing end a couple of times, finally took and it blew a hole in middle of hose, mind you i never even got to the green on gauge, so not over pressured. 2 it seems to have a hose or something in it so before the hole happened and i was actually getting fluid to master cylender, with cap leaking it stopped getting fluid to master cylender and was just giving me air(cap was leaking air not fluid actually). tipped it on its ... well its round .. nose so i could get the fluid up to cap, getting fluid was fine couldnt get cap to seal, very fiddly thought i was doing something wrong, its still possible i was, so i quit to look at instructions (online) and thats when hose got hole, i quit and came here instead, last year when i used it it did work, very fiddly major tweaks needed to get to seal

I bought this for my shop, figured id give it a go and see how it went. Directions are so so and went to use it on an older truck with a duel master cylinder. It didnt work so well. Plastic for the plate is too soft (old one i had used a metal plate) and bent upwards in the middle so that when it pressurized it poured brake fluid put the back. Would work better with newer systems i suppose but thats not going to help with this. It does work though so will hang onto it for other jobs but disappointed with the plate quality. Also, directions say fill with 2 1/2 gallons... Only took 1 1/2. It is easy to hook up though and looks nice but need better plate!

I Have Not Used It Yet, But My Neighbor Did and He Said It Worked Great After He Figured It Out.

I loved how this worked on my 2005 BMW. Very easy to hook up and use. I did have one piece in the kit that was cracked in 2 places. Did not need now but I was planning on using at later date. Didn't want to return over one piece. Found no option to contact seller for their advice. ****UPDATE**** Seller contacted me. Sending out a replacement.

The pressure tank itself works fairly well except the pop off valve won't hold at any pressure and the GM duel master cylinder pressure lid leaks really bad with no way to stop it so don't use on a vehicle that has nice paint or a detailed engine compartment. If you buy this make sure you buy the pressure caps from a American made company

Let's be honest, it's a cheap version of a pressure bleader. But it is functional. A little bit of intuitive use is required though.My recommendation, buy this, but get a different set of adapters, because these don't fit right, and leak like crazy.

Canister amazing great quality and holds pressure well no issues except fittings - trash they won’t fit properly on one side and leaking fluid as soon as you add pressure(see attached pick), if you want this item get canister and by some metal fittings somewhere else ( plastic fittings leak and don’t seat properly ! ) I am GM TECH use this on daily basis .