2000mah Qi Adapter for LG Stylo 6-5 - 4 - LG K92 - K95 - K51 & Other LG Models - Type C Qi Wireless Charging Receiver for LG- USB-c Wireless Receiver for LG Stylo Wireless Charging Adapter

You do have to be careful when ordering one of these, while most any Qi charger works with this, the problem is the connection. The two main outlets on your phone are USB C, and USB micro. This is a type A USB micro. USB C is perfectly oval and can be used either way, but micro is a triangular trapezoid shape, and the narrow side can be up or down. Since the flat ribbon cable is coming from the back of the phone it must be able to be plugged into the port with the proper orientation as you cannot twist the ribbon cable. Look at your phone, two things are important, one is that orientation, and two the port must be in the center of the end, not off to the side. They may make cards that work on the side, but you'd have to find one. It won't likely work with a very thick case or some strap on lanyard that covers the back of the phone you need to be close to the Qi charger, and laid relatively flat.I just got a speaker phone with charger and after installing about 60 seconds to do, I put it on the charger and it immediately read phone was charging. Works well, as fast as the plug-in micro cable. In the past I'd used a flip phone for years and charge the battery outside. My current phone was used for testing mostly due to using WIFI apps. Ports to connectors are only designed for so many insertions. With phones I'd guess a couple hundred at best, but not certain. A lot of my friends had their port wear out, some cheap ones damage easier. This method allows you not to put any wear and tear on the port so you can save it for backup power when on camping or other remote locations. At home just put it on the charger platform at night and you're good to go all day (at least for more efficient phones). Recommended.

I bought this particular adapter because it is touted as fast charge where most aren't. I've used these (different brand) a number of times with zero issues.However, this arrived today and I plopped it right into the case. First thing I noticed is how thick it is. You can see the bulge in the photos I took. This means the phone no longer sits flat, and rocks when I pit it on the charger.Worse tho, is I stuck it on the charger when it was at 89% battery. The phone gave the right feedback and the charging indicator came on. So I left it for a bit. When I got back, the charging indicator was still on, but now my phone was at 86%!! Dropped 3% while charging? So I took it off the charger and left it lying on my desk for the same amount of time that it was on the charger (about 25 mins). When I picked it up after the time was up, it was at 85% battery.Just to be sure, I tried it again. I stuck it back on the qi charger for another 25 ?mins, while it still read 85%. 25 mins later? 81%. Yup, it goes discharges FASTER while charging using thus device.And this is being used on a moto g stylus, a model that is explicitly mentioned as compatible.So, I would probably get a new one bases solely on the thickness. But since it discharges the battery while it should be charging, there's nothing keeping me using this thing.

This worked pretty well for me. I got close to fast charging current although not the most my wall wart can do. I still like it and am using it now permanently.One thing to think about though is that when you plug it in and use a cell phone protector sleeve or case, it is not easy to unplug so it takes up the entire USB port on the phone. If you dont need the USB port for anything else that's great, but if you do it will be hard to use it with this plugged in because you have to unplug it first. I dont need the USB port much for anything else so it is fine for me but it sure would be nice to have a USB power on the power plug as well as the plug itself so i could use the USB port for other things while i have this coil plugged in.I did have a problem with the charging pads used with these coils, one did not work well but the Anker one works well so i am using that one with this now.The other little point is you have to position the phone on the charging pad you buy with this in a fairly exact position or it wont charge. The position is withing maybe 1/8 to 1/4 inch top to bottom and side to side. That means you may have to move it around a little to get it to charge.All that said, i use it all the time now because i never have to plug anything in. It saves the USB port, the last older phone i had the USB connector started to wear out with all the plugging and unplugging and so it because loose with time. I tried the magnetic connectors and they worked for about 6 months then started to fail so i gave up on them and went to this coil and associated charging pad.Good luck.

I am writing this review in hopes it may help troubleshoot some issues for others. First off, installation was easy and fit well with my case. I have an iPhone SE (released between 6 and 7–essentially and iPhone 6 in the body of a 5). I have a Speck case that is thin but durable. The receiver fit nicely into the case and I looped the cable just a bit to get the plug into the lightening port.It works well with a range of Qi chargers. However, every once in a while it will start to charge then lose the connection with the charger and reset. This can go on every few seconds as it almost seems to cycle. One time it just stopped working all together. When it just stopped working, I plugged the adapter into another older iPhone I had around and it appeared functional. Placed it back on my SE and it worked again. More recently, it would connect to the charger but start the cycle of disconnecting and reconnecting every 10 seconds or so. A soft reset of the iPhone seemed to fix the issue (hold power and home button simultaneously for 10 seconds until you see the phone restart with the Apple logo). This tells me most likely there is a software issue that crops up once in a while and so far not the hardware. Wireless charging is still relatively new and suspect there are still a few kinks to work out. Think of it like a Windows computer that sometimes needs a restart when it locks up. 4 stars because it’s good and works well across at least 4 Qi adapters but requires the occasional nudge.

I wish I had listened to other reviews I have read. It really stopped working after a couple of days, as stated by other customers. So disappointed

Pésima calidad, se rompió rápidamente

It allows me to charge my phone wirelessly in my vehicle as well as at home. Happy with the product

Got this so my wife's older Android phone can charge on the charging pad in our Model Y. Put it between the back of her LG Stylo 3 and the case. It works quite well in the car and on the wireless charger in the house. (The one that I use on my LG G8X)It doesn't get hot and the phone seems to be charging at a reasonable rate (both car and house).She has no need to worry about plugging in her phone so we won't be removing the charger receiver. If she has anything to transfer to or from the phone we can do it wirelessly using ES File Explorer to / from our NAS.We're quite happy with this as it saves getting a new phone just to get wireless charging in the car.It fits quite well and is basically unnoticeable except for the plug in the USB port.Hopefully it will last until the phone needs to be replaced, if not we'd probably get another.So far I recommend! 5 star product 🌟🌟🌟🌟🌟

Funciono al principio, pero ahora se conecta y desconecta en cada intento y no carga nada, al contrario