Suptek VESA Mounting Plate for Most Monitor Arm Stand MD6MB

Just as described, fits well +++

Perfect as decribed

Doesn’t fit - avoid

I had to file the sides of the arm fitting for it to go into this bracket. Looks identical to the one I have but it's about 0.5 to 1 mm off meaning it wouldn't mount until I adjusted that. No real harm but not everyone could do that.

Good fits nicely

If you've lost the bracket for your monitor, this is what you need. Comes with great set of screws, mounts and risers. Can remove the locking screw if needed easily. Super versatile.

Good item.

So what I liked about this plate is that it comes with all the necessary hardware to mount to the monitor/screen. As described, it will work for you if your mount is 1.6" to 1.69". Having said that, if you have a mount whose hanging part is bigger, (as with the one on a certain Huano model which is 1.75"; which I saw a negative feedback for - because the buyer didn't check or understand that this is from a different manufacturer)… so basically in such a case you will need to modify your mount to fit this bracket plate… I would say use a grinder to take off about 1/16th inch from both sides (for a total of 1/8" and then it should work as well.

Solidly built. Mounted perfectly to my existing stand.

Comes with the pin screw and cap already in place. I've tired almost everything to remove it and they seem to be glued together making the plate a useless piece of junk. Bought this because I have a quad stand (Inland from Microcenter) and over the years I've lost some plates. The product image looked like I would be able to just slide it inplace on my quad stand but the pin screw makes it not so and the width on the metal arms is just slightly too tight. Product is not as advertised and is worthless

This worked to complete my mount. I purchased a mount arm at auction and it was missing this piece. I did have to shave it with a grinder so it was narrow enough to fit but that isn't the seller's fault. It wasn't listed as a fit for mine but I made it work

Two star because they do come with a nice amount of hardware. Plates didn't fit the desktop mount I had though, even though they should have. About 1/16th not enough room on the slots that the mount is supposed to go onto, had I not an arbor press these things would have not gone on. Also the bolts meant to secure do not work, wrong thread type, tried using the ones that came with the desktop mount and the hole does not line up again by a small margin.