3M Full Facepiece Reusable Respirator 6800, NIOSH, Large Lens, ANSI High Impact Eye Protection, Silicone Face Seal, Four-Point Harness, Comfortable Fit, Painting, Dust, Chemicals, Medium

I have thrown away my old eye protection goggles that get all foggy on me, and my old respirators for paint fumes, and my cheap face masks for dust and particles I don't want to breath in. This products does it all and does it so much better, and the up front costs are low and it seems to me that it pays for itself over time in so many ways.It protects the eyes by filtering out all the air that comes into the respirator and passing it by the eyes before breathing it in. That way, even if like me you wear contact lenses, you might be able to work with the lenses in as I do. Then it exits your breath with moisture out of the mask so that it does not fog the lense.3M has a full compliment of approved filters for toxic environments, and I have used a pair. More importantly for me, they also have low cost filters for dust and particles that are even better than HEPA filter facemasks, and those are way better than cheap facemasks. The point is that once you have the reusable mask, the dust and particle filters are in the same price rance as those cheap facemasks.I keep my facemask set to go with two dust and particle filters attached. Then I just pop it on anytime I think I'm going to be in a dusty situation. No fooling. I've got great eye protection, visibility and easy breathing by just pulling the mask over my head and tightening the straps, less than a minute, including testing the seal. When the filters get old, I replace them in less than a minute (I timed myself).There is some cleanup if I am sweating or breathing out moisture. I have to wipe it down the inside when I am done and sometimes rinse it out and dry it. That is not as simple as simple throwing a face mask away, but then it is all set up for me next time, and those face masks are not so easy to set up correctly, and even then I get leakage around the nose and fog on my eye protection without a lot of fuss versus pulling on the 3M mask with its strong straps and comfortable fitting, solid construction. I'm never going back to the old way.One other thing, there is a low cost, thin, clear plastic cover for the hard plastic clear face shield. That cover can be easily removed and another put on, and those are not expensive. I've beaten mine up for some time now, and I'm glad I can remove it and will soon be putting another on.

I was looking for a good quality Respirator... yes this is on the expensive side; however it is a safety device. Very high-quality material easy to adjust and the fit is great.. when you read "it's just like the 3M Respirator".... well then just buy the 3M!

We ordered "hers" (6800 medium) and "his" (6900 large) full-face protective masks after a lot of research. To save customers a lot of legwork, here is the info. you need:#1 Having had experience with half masks and goggles, it is a no-brainer to go with the full mask. Not only are your eyes as important as your lungs, but reading the specifics on particulates protection, the full mask gives 5 times more protection. That’s according to 3M. Properly fitted and with the proper filter, there are no odors entering the mask.#2 These masks are sized by series number to fit your face. And they do fit your face! Very comfortable,have a great seal, and do not fog-period. We found that initially fitting the mask, the two straps are adjusted over the top of the head to seal the forehead area. The two at the jaw are then adjusted to seal the lower face. Once done, the easy release lower tabs can be released and the mask removed over the top of the head. But always make sure the mask fits properly before entering the area.#3 These masks do NOT come with filters. For your particular application, type in "3M 6000 series face mask" which takes you to the 3M site with a complete user manual, safety instructions, and specifics for filters applicable to your needs. This is clear and concise information worth a few minutes of reading time. Don’t fudge here, if you need two different styles of filters, get them up front. We are talking about your health. The second critical point is to make certain that the filters seat and twist in until you hear a click. The round pink fiber filters may give you the most concern, but with care, they are pretty sturdy and will seat.#4 3M offers for about $25.00 a 25 pack of face-shield protectors that statically adhere to the face shield. One sample comes with the mask. Having tried it, they are worth the investment. There is no difference in vision when they are applied. The mask itself is not cheap and will last a very long time. A replacement lens is about $25. If you are working in any type of environment that will coat the lens or flying debris , most often the conditions you will be working in, it is economic sense to use them.

Doesn't fog even in high humidity, seals well, doesn't feel heavy. Used it for dozens of hours and am very pleased.

This mask worked great. Used it the first day for 7 hours while doing woodworking and metal working and I had no issues with it. It had good airflow, , was comfortable, was easy to adjust while still wearing it, and was easy to clean. I definitely could feel the weight at the end of the day on my neck and back, but it's lighter than alternatives that I've used. This one even kept a good seal with short facial hair.