Product Description

Specifications:

Diameter: 15cm

Total height: 20cm

Diameter of partition wall: 12cm

Ambient temperature: -25~120°C

Weight: 1KG

Instructions:

1. Hold the soft nylon tube and slowly push it into the quick-change connector hole on the needle valve body, and insert it firmly to the end. After inserting it, gently pull it out to confirm that it cannot be pulled out.

2. Connect the soft nylon tube to the vacuum source.

3. Put in the PP separator and sample as needed.

4. Put an O-shaped sealing ring on the outer cone of the upper mouth of the base, cover the upper cover, and vacuum (hold the upper cover by hand when vacuuming, and let it go when the vacuum level rises slightly).

5. Remove the pipe installed on the quick change joint:

(1) Fully and evenly push the flange end face of the blue release sleeve on the quick change joint.

(2) Pull out the tube while pressing the blue release sleeve. If the release sleeve is insufficiently pressed, the tube cannot be pulled out.

(3) For pipes that have been repeatedly loaded and unloaded, if the head of the pipe is severely worn and scratched, when using it again, cut off the part of the pipe that has been occluded before use.

6. Take out the sample: manually unscrew the valve and release the vacuum.

Packing including：

1*150mm vacuum dryer

YIYIBYUS 150MM Polycarbonate Plastic Vacuum Dryer Laboratory Desiccator Jar with Pressure Gauge, Glass Vacuum Desiccator Jar

Details

Description

Common Questions