simpletome ONE HAND TEAR Paper Towel Holder Under Cabinet Adhesive or Drilling Installation Aluminum Alloy + ABS (Black)

I wanted a one-hand tear paper towel holder. The design and instructions made it easy to assemble and install on my cabinet door. It is also easy to insert the roll of paper between the tensioned sides. However, I find that the tension of the 2 side pieces too tight so that you had to use some pressure to pull the paper down and then tear. It is a bit awkward and if you watch the video, you can see that. Since mine is mounted on a cabinet door, when I pull, cabinet door opens. So, I have traded a free-wheeling runaway paper towel tear to one that won't give it up easily.

I have not mounted this with the adhesive strip yet, but the the strip covers nearly the entire area of the back of the mount. So I don't have a concern that it will not hold securely. It is well designed and sturdy. However, the angled arms apply too much pressure for the paper towels to easily roll out. I have to turn the roll by hand as opposed to just pulling on the towels.It was hard to find an adhesive paper towel mount that that looked practical and strong enough to actually work. Glad I did bc in my case my cabinets are too thin to mount one with screws. **Be aware though, the instructions basically say that to remove the adhesive you may need to scrape it off with an "art knife." And there is a lot of adhesive. So don't buy it expecting to be able easily remove it without possibly damaging the paint or wood it is sticking to.

Got this to replace old 30 year old paper towel holder in the kitchen. The old one worked fine for regular rolls. For double or bigger, not so much. Hardly ever see the single rolls anymore, so it was time to get a newer one with more room. Holds the paper towels fine, even triple rolls. The double sided tape holds it up under the counter just fine without the screws.

Your browser does not support HTML5 video.  Nice! Used the sticky adhesive. There was not been a probleom with it not sticking or wobbling. It is very sturdy! And we get clean cut paper towels everytime.

This has been amazing! Paper towels on it are not so loose that the entire roll comes out but not too stiff where it barely moves, it’s just right

They don’t get any better than this! One handed rip off and no unwanted rolling during RV transit! Mounted it with Command Strip picture holders.

This is the third type of dispenser that I have purchased. The others were returned because they did not really tear off only one sheet. This one does. You have to assemble the two sides, but it is only one screw on each side (which is supplied). There are two longer screws and anchors if you want to attach it to a wall or under a cabinet with screws instead of the mounting strip provided. The strip is the full width and length of the device so mounting is strong and easy to do. After much searching, I highly recommend this one.

This was very easy to install and is quite sturdy. It doesn't clamp onto the paper towels as neatly as I expected even thought the paper towels are the proper size as the product advertises (11") There is a slight bulge on both ends of the holder because of this, but it's not too noticeable. The grip on the paper towels is quite tight, making the ability to remove the paper towels with only one hand possible. It almost feels too tight, but it does not obstruct the ability to roll the paper towels on the holder, so overall, I'm fairly satisfied with this purchase.

Excellent design paper towel holder. Huge self adhesive pad or screw in place. I used both. Surprising how soiled the underside of kitchen cupboards become but it was spotless and grease free when I fitted the holder. Our rolls are 11" wide and it puts just the right amount of friction on to allow tearoff. Springs are good and strong. Black looks good in our kitchen. Great purchase.

Very easy to install, works great with Regina big rolls not so well with smaller ones. Does exactly what it says. I would definitely recommend it.

Product was good quality but box was missing the assembly screws and the wall fixing screws....so somewhat of a hassle finding my own

Endlich ein Artikel, bei dem die Lobhudelei des Herstellers für das eigene Produkt absolut gerechtfertigt ist:- schwere, solide Alu-Platte- versenkte Schraublöcher in der Platte- Lange und kurze Schrauben für Befestigung liegen bei- zusätzlich 3M-Klebestreifen- hochwertige seitliche Rollenhalter mit solider Federnechanik, macht einen extrem guten EindruckDas Ding kommt zerlegt an, ist aber im Nu zusammengebaut. Hilfreich auch, dass die seitlichen Halter nicht nur mit jew. 2 Schrauben befestigt werden, sondern auch noch kleine Stöpsel haben, die in entsprechend ausgestanzte Löcher der Alu-Platte passen. Somit perfekter Sitz!Rollen lassen sich spielend leicht einklemmen und aufgrund des Widerstands der seitlichen Halterungen nur mit einem nachhaltigen Zug abrollen. Das ist zunächst etwas ungewohnt, aber total sinnvoll. Meist will man ja nur 1 Blatt und andere Rollenhalter spenden da schon mal zuviel, was nachher dann runterhängt oder vergeudet wird.Hier zieht man einfach ohne Ruck die notwendige Menge ab. Wenn mann abreissen möchte, reicht dann der kleine Ruck.Super Sache.Einziger Kritikpunkt (jedoch keine Abwertung, da ja offensichtlich): Es gibt die seitlichen Halterungen nur in schwarz. In einem reinen weiß wären sie deutlich stylischer („Apple-Look“).

....- Rolle festhalten- Küchenpapier abrollen- Küchenpapier abreißen- kein Papierwust wenns mal schnell gehen mussDat Ding ist etwas klobig, ist aber nicht so schlimm, dann passen vermutlich die dickeren Rollen der Nachbarländer auch noch hinein.Die Haltebacken für die Rollen werden mit richtigen Schrauben montiert, dann kann dieMassive Alu-Grundplatte mit 3 3M Doppel-Klebeband-Streifen fixiert werden , da gibs welche die bekommt man sogar wieder ab und die halten trotzdem!Ich bin zu 100% überzeugt, habe den Halter sogar mit dem Schriftzug lesbar montiert, wir werden häufiger nach dem Hersteller gefragt.Das Ding ist seinen Preis wert!