5" Midrange Car Door Speaker - High Efficiency 200 Watt Max Power Audio, 8 Ohm Impedance, 92dB Sensitivity, 15 Oz Magnet, Paper Cone - Pro Car Audio Stereo Loudspeaker - (PDMR5)

I put these with my Yamaha system with Bose in front and made boxes for these 5" speakers for the bottom front for that really crisp vocal pop. I'm a happy camper, they work so well like this. No distortion at high volume and I run hard metal through them. Perfect fit, great value for the price. I look forward to working on my next project, ill be back..

I bought it for the following reasons: affordable price, paper cone, sealed back, with a pretty impressive 100W RMS power and no grid on the front side unlike a Goldwood GM-65/8 I bought to replace my old 3 way "Radiotechnika S90" speaker's midrange driver 15GD-11A (made in USSR) result excellent replacement! There is no reason to compare, they are different classes: Pyle Pro PDMR5-5" is a well done midrange driver with great sound quality; 15GD-11A is single piece of metal, paper and rubber with sound like a phone handset. So I'm very pleased with my purchase. Now I'll get rid of my "Raduotehnika S90" and will build my own 3-wey speaker cabinet, definitely it will be with Pyle Pro PDMR5-5" *** (3 month later) I already done speaker cabinet and the result you can see on the customer images. I use crossover 2-nd order with slope 12 dB/octave. Crossover frequency points: 750 Hz and 5 Khz. (bandwidth could be slightly wider, but I left a some margin) Frequency response is almost linear and balanced as far as I can hear (opposed my previous driver, which had terrible resonance overtone at 4,5 khz.) Sensitivity 92dB is more than enough for most of cases. I think this product has a good price/quality ratio and I would recomend it for most of buyers. sorry for my bad English

Great quality fit there really loud great for price very durability is great and functions great

I know this is a cheap mid range sub.. but I didn't realize it was this cheap !!! The sound quality is garbage. It moves no air at all whatever the cone, rubber. coil are made of they don't move at all. You can watch a good woofer flex and inhale and exhale with the bass.. Not this speaker, no air movement or anything , and sound Quality is garbage. People saying this thing sounds great haven't had a good pair of speakers yet obviously. Cheap as hell... you get what you pay for with this mid range.

My 1972 Advent speakers cones were rotted away so I purchased these and when I tell you these were the perfect one for these vintage boxes you would have to be here to hear them!! They sound so good!! I had to purchase two more to use as midrange speakers for my Fisher 1976 cabinets!! These speakers uses a 15 inch woofer with these as a midrange and horn tweeters and the original Fisher crossover from that era!! Again..you would have to be here to hear them!!

Using as pure mid-range. Brings the proper snap to snare drum, very clean guitar quality, vocals lose no distinction. Save yer money. These cover a lot of ground, heavy magnets. For fun, I now have 4.

I’m SUPER impressed with these. They don’t extend low enough to replace a 6.5 or 8 inch loudspeaker but when used in conjunction with coaxial speakers these are amazing. This speaker is stupid loud for a little 5” speaker. I’m using it for my Bluetooth shop system I designed. My only gripe is the frequency range kind of sucks, it’s super narrow. Update: as it’s breaking in, I’m noticing a significant amount of distortion. I have a high pass filter on this speaker so it’s not receiving Signal below its frequency range. It’s not the input signal either as there’s no measurable distortion when viewing the waveform on an o-scope.

I was reluctant to buy these speakers based on the current history of Pyle. Quality has been poor the past 20yrs. I took a chance because it’s hard to find a 5 inch sealed back speaker anywhere, even harder to find a 5 inch speaker with RMS watts over 60. The RMS of these are 100w. I am throughly impressed they handle every bit of 150w with no distortion. These are not made for any bass. They are midrange speakers only! They worked awesome for my Bluetooth build.

these speakers were used as replacements in my old enclosures and actually sound better than the originals

Just perfect, paid $12 here in Canada on Amazon but would be willing to invest $20. Plays very low for a sealed midrange so can cross with a larger woofer if needed. Very efficient, very accurate, warm and linear. It's treated paper cone is stiff enough for detail yet damped enough for forgiveness of distortion. Hooked up in 3-way with 10" pro woofer and 1" silk dome (partially horn loaded) tweeter, crossed with a 2nd order XO at 800hz and 5khz and fills that huge frequency range beautifully. First Pyle product for me, which gains confidence in the brand and can't find a duplicate of these midranges with another brands stamp on it so may actually be made/designed by Pyle not just some random foreign manufacturer selling it to multiple bidders.

Good value for money. It has a basic SPL of 92dB but also a small region from 3 to 4.7 KHz where the SPL reaches 110dB

Qualità veramente bassa, occhio anche al reso. Sconsigliato

Este altavoz cumple satisfactoriamente su función a un precio ajustado (inferior a 25€ en el momento de la compra), para un usuario con experiencia media/baja en temas de audio. Conectado a un amplificador de 100W por canal, y un conjunto de 3 vías, el sonido es bastante limpio y se asemeja a otros altavoces de mayor gama con los que lo he comparado. Personalmente, he notado una mayor presencia de agudos, pero la diferencia no es muy relevante. Con este mismo amplificador, me ha llegado a distorsionar algo en ciertas condiciones, forzando niveles muy altos, por lo que no creo que aguante los 200W que anuncia pero en general parece tolerar bastante bien los 100W. El diámetro del agujero para la instalación es 110mm aproximadamente como se puede ver en la plantilla que lo acompaña y el diámetro exterior es de 130mm. Se asemeja a las 5"