Dorman 741-349 Front Passenger Side Power Window Regulator And Motor Assembly Compatible with Select Nissan Models (OE FIX)

This installed exactly as it should have and is still working over a year later. When and if it ever goes out again I will be looking here to replace.

Front passenger door 2008 frontier crew cab SE. window was really slow, works great now.

Easy to install and very quite. Excellent part .

The product is great. The fit perfect, No issues with the PART or the COMPANY that sold it. (GOOD JOB GUYS!)Putting this thing IN on the other hand can be a S.O.B to say the least! Why, you ask? MY window failed when it was all the way DOWN, I.E. My window was completely IN the door. THAT is a problem because it is NECESSARY that you REMOVE, not loosen the 2 bolts that hold the glass to the window regulator. When the window will not move and it is all the way down it is VERY difficult to get to those 2 screws. I have fairly large mitts and it was a 3.5 hour battle from Hell just to get those 2 screws removed. The regulator and the motor will easily come out of the large hole located on the right of the door. USE A OLD TOWEL between the glass and the regulator or you WILL scratch your window / tint. When you can raise the window up about 6" to the proper position for removing those two screws, the job is SO easy-peasy. The second time around, after getting this new unit and having temporarily brought the old one back from the dead for a month or so, It only took about 30 minutes TOTAL!A little trick, if the window won't move at all. WHILE pressing down OR pulling UP on the switch, open and kinda slam the door back closed. You MIGHT just jar the brushes in the motor JUST long enough to raise it or lower it into position for screw removal. ;-) GOOD LUCK!

Quality Merchandise easy to install

Works great even the wire connector matched up. 2005 Xterra.

Exactly what I needed for my 07 Frontier. Great value for the money. Fits right in, easy to install.

This is my third window motor replacement, so I can compare. I find Dorman products to be of generally high quality, in terms of fit and finish. The tolerances are strictly enforced and I have yet to have an issue with misalignment (I had that for a previous install with a third-party brand). It is too soon for me to state whether the motor will last, but I think it will outlast my truck (which is getting old). The part comes pre-greased with silicon based grease which is great. I agree with others: grease up the window glass panel groove to ease up the motor's work on the way up.