Romwish 8FT LED Shop Light Fixture, 90W 12000LM 6500K Super Bright, T8 Integrated LED Tube Light, D-Shape 3 Rows LEDs, High Output, Linkable Light Fixture for Garage, Workshop, Warehouse (Pack of 6)

These light are AWESOME!!!!! easy to install, super light in weight and very bright. I installed these in my garage so I could do body work on my vehicle. The customer service for this brand was exceptional, very hard working team to resolve any issues I had. I had one that was damaged in transit and they went out of there way to resolve and replace to get me back up and running. To be honest the lights are great value already but with that kind of after sales/support this light set is super cheap and well worth the purchase. Since then I have purchased another set because I was so happy with everything. I will use again in the future. Please check them out!

Purchased a 6 pack for Church sanctuary, as the old florescent lights 30' high in ceiling are not all working. Installed these 20' high on sidewalls (3-Ea. side/24') completely flooded 1/3 of sanctuary with daylight. It was a pleasant surprise to the members, who nothing but compliments. Attached both sides to remotes, so you just push a button and you have beautiful lighting. Will be buying more because of the "D" led strips in each fixture (3 rolls of led instead of only 2 in a "V").

Hard to beat for the price. Has about the highest lumen output I've seen. Very versatile power configuration (110VAC plug, female-to-female power cord or female-to-female plugs for daisy chaining). My only issue was the flimsy mounting clips they use. Once I had each light mounted, I had to go back and pinch them closed with channel locks. Right now I would definitely recommend these and buy them again. Hopefully they last a long time.

These are great garage lights. Mounted them to the bottom of my trusses in my pole building at the 12 foot level. These are just over 1 inch in width so fit perfectly along the 2x4 bottom edge of the trusses.This would have been a 5 star review but the brackets are not good. They barely fit the lights and if you bench fit a bracket down to fit properly on both sides of the light, the bracket is so stretched that you would not have room for the screw head that is needed to hold the bracket to a mounting surface. If you attach a row of brackets to the ceiling first they need to be in a perfect line or they will not work. They are also thin and somewhat brittle so I broke two installing the first 3 of 6 lights. The seller provided 4 brackets per bulb though so that is good.I finally got smart and just lashed the last 3 bulbs up to the joist bottom with a little handi-wire or stove pipe wire. I have a simple wire loop holding each end of the bulb and up over the joist and the wire is twisted together on top of the joist. It looks good and next time I'm up there I will remove all the brackets and use the wire attachment on every bulb. I think they will be more secure and it is much faster. Believe me, no one can look at the light to see how they are mounted when they are lit. It's like trying to look at the sun, you just can't.These are 3 row LED lights and are good and bright. I will be buying more of the exact type to complete my lighting as we finish up the pole barn build. I think I can use 12 total in my 40x60 foot building for the general ambient lighting. I may add more later for task areas once I get the layout established.

Fix your mounting brackets. That cheap metal you use is garbage. Weld hooks or something. I'm using wire to keep the lights up. Plus the wire conections are loose any sight pull they pop out. Other that that the lights are great. Bright and kool looking. Would i buy again yes due to price and willing to make shift and add additional parts. Others might not feel the same.

I purchased two boxes of these lights (5000K, 90W, D-shape) for my garage and workshop. The lights are bright and the color temperature is a very nice daylight without being blue. Once I worked out the issues and had them installed I'm quite happy with the results. The pictures don't really do them justice and I don't have a nice enough camera to show a fair before and after comparison. However these lights are not without fault which I was able to resolve with the help of Amazon. The lights (when they work) get 5 stars, but the issues below are why I've given them a lower rating.Shipping & Quality control:I ordered two boxes (for 12 lights total). Due to defects in the lights, Amazon had to ship two more boxes to me so I could get a full set. On average 12% of the lights I tested failed on arrival.The first box arrived and all lights were functional. Unfortunately the second box of lights appeared to have some shipping damage where one of the lights was slightly bent. This light also had a dead short to ground which popped a breaker. It doesn't appear that the short was related to the bend. Thankfully, Amazon immediately cross shipped a replacement and I shipped back one box. The shipping damage isn't completely unreasonable given the box is roughly 6"x6" and over 8 feet long.The replacement arrived without any apparent damage but upon testing the lights, one of six failed with a short to ground. Amazon was able to ship a replacement but this time I waited to send back the bad batch. When the second replacement box arrived I again found another bad light in the set. Amazon was able to resolve this satisfactorily with me and I was able to mix and match between the replacement boxes to get a full set of lights as I originally ordered.Only 1 of 4 boxes had a complete set of fully working lights. Of the 24 lights I tested 3 were failures for a 12% failure rate out of the box and I had to mix & match between sets to get a full set. Even if one were to discount the shipping damage, that is still an 8% failure rate out of the box.I think this is ultimately a quality control issue with manufacture causing some leakage or shorting between the wiring of the light strips to the chassis. It is possible that the manufacturer will ultimately improve on this or maybe these all came from one bad batch but these issues should have been caught before the lights left the factory. Although i do like the lights I would recommend any buyers test each light individually on a GFCI protected circuit to ensure function and safety prior to installation.Installation quibbles:The small clips that these style lights come with are insufficient to reliably hold the lights because they can't positively lock onto the channel. This is common across may different vendors of these style lights and from reading other reviews I was partially expecting it. I would not trust these clips so I fashioned a U-style hanger with 14-AWG wire that can hold the light into the clip. Because the tube is plastic, one can't put a great deal of pressure but that isn't a problem given how lightweight these lights are.A second installation issue to consider is that the power connectors do not have a positive catch or lock. It is very easy for them to wiggle or pull out. The power cord would easily pull itself out just from its own weight. In addition to being annoying this could cause charring of the connector down the road. Therefore, I used a heavy duty hot-melt glue to pot the connectors once installed. Light the clips, I think this issue is endemic across similar lightsPower cord miswired:The lights are delivered with a power cord that has an inline switch. Thankfully the cord for these lights includes a properly connected ground pin which is correctly wired to the chassis of the light when connected (some other LED light fixtures do not have functional grounds).Normally the power switch should always be on the hot (i.e. the "phase") wire. This is so when the switch is off, there will not be high voltage present in the lights (including any subsequent lights that are connected together). About half of the power cables I tested were miswired where the switch was inline with the neutral wire. I discovered this because when the switch was off I saw a faint glow from the lights due to leakage current.I did email technical support which appears to show the manufacturer of these lights as Sunway Light Limited. They said they were made aware of the issue with a supplier for the power cables and had corrected this. They also offered so send replacements free of charge. In my application I have these lights connected to a switched outlet so I don't mind and declined replacing the cables.I did not accept any offers or compensation from the seller (Romwish) for posting this review.

These lights were so easy to install. Our shop is so bright. We’ll always use these lights. No more heavy bulky fluorescent bulbs. It’s as bright as daylight now 🤩