KODAKLuma 450 Portable Full HD Smart Projector | Wi-Fi, Bluetooth, HDMI & USB Compatible Mini Home Theater System Up to 150” | 1080p Native Resolution (4K), 200 Lumens | Tripod Included

---Original August 14, 2020 review---I normally don't write reviews immediately, but upon initial inspection and testing, I think that Kodak has something very special in the pico-projector world with the Luma 450. I can confirm that the native resolution is genuinely 1920x1080 (or at least very close to it, I'll never know if I was cheated out of a couple rows of pixels or not). The brightness seems enough to be 200 lumens, but I don't have a way to confirm this. The product size is 1.26"x4.9"x4.9" and appears to have roughly 1.2:1 throw ratio (don't quote me). Time will tell how reliable it is, but I can cautiously recommend this projector to anyone looking for a small/pico 1080p solution.Long Story: Prior to purchasing the Luma 450, I had two 720p pico-projectors from AAXA, and a third cheapo full-sized Chinese 1080p projector. I have been looking for a pico-projector that runs in 1080p for quite some time, and I had been considering three options: Optoma LH150 (2.25"x7.5"x11"), AAXA M6 (2.1"x7"x7") and the AAXA P7 (2.7"x4.4"x4.7"). All three of these were a bit big for my liking, and the smallest was awfully dim at 70 lumen. Then, seemingly out of nowhere (late July 2020) Kodak quietly put the Luma 450 on the market, having only released 5 other projectors prior that all had very low resolution.Kodak's claim of 1080p native resolution with 200 lumen seemed unbelievable at the size of the machine, especially when compared to the AAXA P7, but I decided to gamble on the purchase anyways... Kodak as an American company has a bit more to loose by lying than their foreign competitors.I had some issues connecting the remote control at first, and honestly I couldn't tell you why it did eventually start working. The menu's and settings are fully usable without the controller, however, so no big issue for me. I ran a few images on the display that let me count and measure pixels, and I am very happy to say that the results match what I would expect from a 1080p projector. The response time seems reasonable, the brightness is more than enough at 65" for a dimly lit room, and the noise from the fan is typical of this size of projector.One interesting note is that it seems to be more sensitive to cabling and signal quality than other displays. When I ran an image through a splitter and extra length of HDMI cables, the quality of the image was significantly degraded compared to my Chinese 1080p projector, which is unusual for digital signals that usually either just work or don't work with no in-between. When the cable is kept short and uninterrupted, the quality of the image is very impressive, and fully replaces all other projectors I have.I hope this helps someone make a decision to buy or not buy. Like I said, Kodak has something very special with this projector (in it's size and resolution category), and I hope that mine lasts a long time. I will update this review if anything dramatic happens in the first year... outside of further troubleshooting with the remote control. My use-case is several hours every day, but mostly stationary and always plugged in.---Update for January 13, 2021---I have used this projector 3-5 times a week for several hours each session since the original purchase. It is pointed upwards at the ceiling with external speakers plugged in. The power is always plugged in, so I have not tested the internal battery at all.I have had no further issues with the remote - It has reliably worked with no connection issues since I got it working the first time. I have not had to changed the batteries yet.The focus wheel has kept it's position with no need to periodically adjust (this is a problem for some cheaper projectors).I have not blown it out yet, or cleaned it in any way, but probably will this month just to avoid an excessive buildup of dust - one of my other AAXA pico projectors, after roughly a year, had such a huge buildup of dust that the device actually sparked and produced a cloud of smoke (it still works), so I've learned to clean them every once in a while. As I've mentioned before, my projector is pointed upwards towards the ceiling, so I'm not using them in a normal way, which contributes to extra buildup of dust depending on where the projector has it's vents pointing.I can't find anything to complaint about, the projector has worked fine, and I highly recommend this projector to someone looking for a 1080p Pico projector. I hope it lasts another couple of years with no issues.

The unit by itself is a great little projector. It’s easy to connect and easy to use. You can’t use it during the day time, only at dusk or at night. The remote control is too unpredictable it goes to slow then to fast you have to go back and forth several time to be able to select the right item on the menu. The image is very good I use it at 120’ and the quality of the image is great. The sound is not good very low, I plugged in an another source for the sound as the Bluetooth didn’t work for the sound and now it’s a good setup.

Will only connect through a roku streaming stick. Will not connect through my macbook via HDMI for streaming, will show the screen and any videos you have personally, but you cannot stream anything from any service on this device. The android app is no longer supported for android phones, so can't use the remote or app there. Cannot connect to a nintendo switch. Native apps on the projector are no longer supported (netflix, prime, disney, etc).The concept is great and the brightness is enough for a dim room and portability and resolution is great, but complete lack of connectivity for streaming services or gaming makes it a no-go for me. I'll be returning.

I have no experience with projectors so I don't have a reference for comparison, so these are my impressions as a total noob. I was really impressed with this little projector. The unit itself feels extremely quality – it's small, great looking, and feels very high quality. It works exactly as expected, no big surprises.I think this will fit the needs of most people who are looking for a casual, quality, mini projector, but there are a few cons for me personally.Pros:- Native 1080p resolution. Why is this so hard to find?- Picture is great, brightness is good enough in darkness (don't need complete darkness, but close).- Projects well on a wall or ceiling. Included tripod makes it easy to point and hold in any direction.- Works plugged in, battery is optional.- Pretty quiet, less noise than an average laptop fan. Unit barely gets warm.- Easy to use, nice remote control, everything just works how you'd expect.- HDMI works really well if software ever gets frustrating.Cons:- No horizontal keystone (only vertical). Big problem for me because I have angled walls.- Battery lasts 1 hour. You can lower the brightness setting to probably squeeze out more battery, but it's only 200 lumens so I can't imagine ever wanting to reduce brightness.- WiFi only connects only 2.4GHz (no 5GHz). Took me far too long to realize why it wasn't finding my 5GHz SSID.- Software isn't bad but can be clumsy at times. Navigating apps and typing with the remote can be agonizing, like other typical devices. When I installed Disney+ from the Play Store, there was no way to navigate the app with the remote. Seemed like the app didn't understand the input or something.- The remote mobile app simply wouldn't stay connected to the projector and has trouble finding it after disconnecting (maybe my router?). The projector and device with the remote app have to be on the same WiFi network, which isn't convenient.