3 heads MAPP torch

I was looking for a torch w/a bit more muscle vs buying a smelter or having to resort to oxy tanks and several other costs. W/just propane alone tho I’m able to reach the needed temps to make some oz ingots and play w/alloy making to process into sheet/wire easily without needing oxy or acetylene set ups.

The 3 headed torch is a badASS, works wonderfuly, the only down fall is it's screams hella loud!

Love this torch head, I use it for melting and casting silver gold and bronze and it’s enabled me to melt more metal much quicker!

This has been one of the hottest torch tips i have ever seen. It can soften metal to the bendable point, it can heat and brass car radiators with ease and if it's cold in your garage in the winter, it will heat it up just fine. That last one was a joke but, you do need to use it in a well ventilated area because it really does put out the heat. Now for the CON's: There is only one setting and that is full blast all the time. This has a couple drawbacks like if your use small portable gas cylinders you have between 7-10 mins of run time before you exhaust a full tank. It also means you have no temp control from the tip. It's blasing full blast or its off. If you try to adjust it down off of full you will damage the tip itself due to the concentration of heat at and below the flame tip exit point. It only takes about 20 sec to go from normal to glowing white hot at the ends of the tip. I have used it with both Propane and Mapp GAS and both perform well with it. Just remember, if your using it with a handheld type cylinder, the cylinder will freeze up at the bottom and it will only last about 10 mins

Buen producto Buenos materiales

It’s good but hard to light have to feather the pressure but works good un-braising distribution boxes on vrf a/c systems

This torch is a beast! It will melt five ounces of silver in snap! Same with copper. The following comment is not a negative, just something to be aware of. This torch burns a lot of gas - quickly. As such, as the volume of gas decreases the pressure also decreases which means the tip temp decreases. Thermodynamics 101, PV=nrT. This is very important when dealing with larger amounts of the metal in the crucible. With silver not so much as the melt temp is1,763F. With copper though it can make a difference as the melt temp is 1,984F. Just need to swap bottles or let the current one stabilize to room temperature. I really like this torch and would highly recommend it!

I purchased this and used it for about 2 months being quite impressed with it. Extremely fast brazing with good control of temperature. The price was great also. The issue came while brazing a gas line, luckily outside on a customers lawn. The attatchment point of the head and arm barrel separated and didn't just catch on fire but shot a flame under pressure about 3 feet. My assistant was burned on the arm and face. The grass caught on fire. If this had occurred in a crawl space the home would have burned down. I am now sticking to named branded torches and would NOT reccomend this product.

Excellent item

Worth every penny, Just as hot as an air acetylene torch. 1/4 the size and 1/10th the cost. Buy one you will be impressed!

Good product 👍

Can sweat almost as good as a A32 acetylene tip, broad heat better for large soldering jobs over brazing smaller pipe. Great price, only thing is that if you arent wide open or the tank is nearing empty the tips go red very fast as the barrels are a bit thin. Faster than turbotorch products for sure - thats the only reason for 4 stars over 5.

as advertized.