KEMIMOTO Compatible with 2024 2023 2022 2021 Ninja 650 Fender Eliminator Compatible with Z650 ZX650 Ninja 650 License Plate Bracket Ninja 650 Accessories 2024 2023 2022 2021 2020 2019 2018 2017

2021 Ninja 650 from the factory looks aggressive until you get to the back and see that elephant trunk sticking out! Lol Now the bike looks like it should have from the factory to begin with! Awesome product. Watched a YouTube video how to install it. Took 40 min to install. I'm very hands on and have electric tools but had no clue how to do this without following steps first. Take your time removing the pieces off the bike and make sure you position then into place. This piece fit like OEM! 👍🏼

This plate holder looks great. Very easy to install. You do need to understand how the side signals are squished fit into place. Just look at them when you take them off the original stem. Don't forget to put the plastic piece back in the inside. That's why that other guy's signal fell off. This fit my 2024 Kawasaki Ninja 650 perfectly. The original wires are a bit of a pain, but not difficult. You don' have to take off all of the panels like several others mentioned. There is one screw that is screwed into the plastic only underneath. You can just pop this out by pulling on it. You don't need to take the whole tail apart. But it's up to you. If that freaks you out, then take the tail apart. Both ways work fine.

I can confirm that this does fit the 2023 Ninja Kawasaki 650. I have the KRT edition, but that just means it has cooler stickers than yours and the stickers add a ton of horsepower lol.This is a solid piece of hardware! It was a pain in the butt to install given I have never modified a motorcycle before. Videos help so make sure you watch videos. Don't rely on the directions if you have never done this before, but if you have, you probably don't need them anyways. You do have to removing the rear side fairings.Just a tip, there is a screw that holds the OEM fender that requires you to remove additional pieces, but I took a longer screwdriver and pushed the plastic piece downwards and I was able to remove it that way. You won't be reusing that screw so add it to the "I have no idea where that screw came from" pile.I do have to point out that the plastic on the underside of the seat closest to the front does not allow this hardware to fit flush, but it is still fairly snug (picture). The rear edge of this hardware has a 45'ish degree cut and it fits perfectly. You also end up with lots of extra wire given that it is now a foot closer, but lots of room to fit the additional wire.I saw in a few reviews that a turn signal light had fallen off, but I am chalking that up to user error...sorry. Make sure you utilize the turn signal hardware from the OEM fender. It's a type of washer that pushes the rubber outwards so it doesn't pop out of the channel. The piece with the screw guarantees that it will stay in place. A tip is to put the wider side of the rubber through first because it made this part a heck of a lot easier. I spent a good 20 minutes trying to attach the first one. I was able to get the second one attached in a few minutes after realizing this.Make sure you also keep track of your screws because you will end up with extra screws and you might freak out if you don't. For me, I ended up with 4 extra screws that were attached to the seat since the hardware replaces those 4. Depending on your taste, some of the reflectors are also removed. I added what I could to give me the extra visibility.All in all, I am very happy with how it how it looks after installing this.

I can’t believe how much less this costs over the bigger names! It is very sturdy and simple. Looks fantastic! Fits snug right into the stock opening. It even secured better to the bike with actual nuts and bolts.The hardest part about install is getting the stock fender apart, and getting to the bike’s wires, so that says a lot. It’s very easy to transfer all of the bits from one to the next.Highly recommend!

Installed on my Ninja 650, followed a youtube video, install wasn't too long or complicated. Looks good and seems to hold well.

I got this for $20 and couldn't be more pleased! My 2023 ninja 650 looks a lot nicer now and it was fairly easy to install. This was my first "mod" so it took me a little over 2 hours, but I was taking my time. 4 stars because the left signal light did fall out of the frame already. Not sure if the holes are a little too big or if I missed something when pushing the rubber through. Either way, great buy!

Fits nicely on my ninja 650 Kawasaki and very easy to install

Works great with the 2024 ninja 650 super easy install, and it even comes with little rubber nubs to keep the plate from vibrating