Superteam Carbon Fiber Road Bike Wheels 700C Clincher Wheelset 50mm Matte 23 Width (White Lines Decal)

After reading the reviews, I figured I’ll give them a shot, and glad I did. Put on 218 miles on these rims week one and so far so good. I’ve gained about 2 MPH only average and can feel the difference a over 20mph compared to my old Aksum Race rims. Was wondering about hubs, but roll real nice with very little resistance. The guys I ride with thought these were high dollar rims and even said, they are probably made by same folks that make higher end wheels..... I’m not one for names to get excited. When mounting, get yourselves thin flat spoons, I got a set with the continental race tubes I bought. Will be challenging to mount with conventional spoons. Also, I went with 80MM valves, could get away with 60’s. Get a little whirl noise from the stems, but I can deal. I did wrap stem with electric tape to stop the valve tap. Will keep on updating as I put on more mileage, but as of now, thumbs up and will get a set for my other bike. _________________________________________ August 26 19 update: I have about 700 miles on these now. I had a few spokes on rear wheel loosen up. Tightened them up, and since I don't have truing machine, still have a very slight wobble, nothing that is felt when riding and not bad enough to cause brake pad rub. Still satisfied with purchase. ——————————————— Update July 30 2020.... been riding on these rims for months now, been on 3 of my bikes, and have over 4000 miles on them. Good as gold! Even on roads that are not so smooth. Hubs rolling like new, freewheel holding up well. Very minimal wear on braking surface. No breakdown of the carbon. Will certainly but another set soon!

I've had these wheels for 5 years and they have been excellent. I'm an ex-racer and still do around 250 miles a week on average. My guess is I've about 25,000 miles on them (I have multiple wheelsets). My main riding area was in the North Bay area of California with some of the worst, most pot-holed roads in the country. I've travelled to Europe with them for months at a time. On a ride I once had a huge framing nail go clean through the tire and out the side of the rim. And after all of that, I have not had a crack, a broken spoke, or have even needed to true them. What did finally kill the rear wheel was riding in the snow in Austria with tons of salt on the roads. It just killed the rear hub bearings, but the rim itself was still fine and true. And the front is still in great shape. As always with some of these Chinese products your mileage may vary, but my experience has been great. I'll be purchasing another set soon to keep in the US while I'm keeping the old pair in Vienna for riding in the summer.

Nice and light. Grabbed the box from the amazon driver and it felt empty. The final checklist on my front rim was not checked out in permanent marker like the rear was. Raised my average speed by 2.75mph on rollers. If you plan on purchasing and removing decals, don't. Decals are screened over? Sealed with the finish. Not sure what it's called. Pick the decals you hate the least. I would have chosen the invisible decals. Like the rims only put 50 miles on them since they were delivered. No damage upon arrival. Shimano style break pads work well. Had to buy shimano holders and modify to work with my older campy breaks. Fitted with 2x10 shimano Great update for my 20+ y/o Kestrel Had 30+ y/o campy wheelset on beforehand. Happy with my purchase. Will update someday.

First off, these are definitely a huge value wheel-set. Right off the bat, I could feel the lightness and felt like cruising at high speeds was substantially easier. After going about 300-400km on them though, I noticed that the brake tracks have actually bubbled and the resin melted away. Super sketchy!! I’ve made sure to use swiss stop carbon specific pads and positioned them following the guide, as you can tell by the brake dust residue. The resin had heated up, bubbled, and melted off. I can see that most people have no issues with this wheel though, so this is probably an isolated incident. The seller quickly replied to my messages and are replacing the rear wheel with a new one. Great customer service on their end! I've seen big names like Easton have much worse quality control and customer service, so big props to Superteam.

I can't get over the price. I have been shopping for quite some time looking for a high quality carbon wheel. I took a chance on these. Glad I did. These are incredible. High quality, very lightweight. The hubs are solid. After only 3 rides I gave 5 stars. Will sent a long term review after one year of riding. Love them so far, not to mention how good they look. I took one star away for the graphics. I chose the white outline. You cant read what it says, it just looks like random scribbles on the wheel. Still looks good, but many have asked what it says.