Full Motion TV Wall Mount, JUSTSTONE TV Bracket Fits Most 26-65 Inch LED Flat&Curved TVs,Articulating Swivel Tilt Dual Arms Extension Max VESA 600x400mm and Holds up to 121 LB

This worked perfectly to mount an older (2009) heavy flatscreen 43" television in my garage. The range of motion is great - it lays fairly close against the wall normally, but can be pulled out and turned side to side as needed. It's sturdy, can handle a lot of weight (I doubt any newer TVs, even very large ones, weigh as much as my older flatscreen), is fairly easy to install (comes with a template) and seems to be adjustable to just about any mounting setup a tv might have.

I bought this mount to hang my mother's TV in her bedroom. The TV is her old unit from the living room, a 42" Screen. I was concerned as to whether the walls in her home (an older mobile home) would be capable of handling the weight. My only disappointment was that the portion that mounts to the wall was not wide enough to align with the studs in her wall. This was more of an issue with the studs in the home as they were not set at a normal width apart. I remedied this situation by using lag bolts to mount a 3/4" piece of plywood to the studs and attached the TV mount to the plywood. This created a solid mount to the wall and studs with no concern for failure. I am a pretty big guy at 6' and 260lbs. I grabbed the mount where it was attached to the wall and was able to lift myself off the ground. Once the TV was put in place we were able to extend the arms to their fullest from the wall with no issues. The TV is more than secure. As a bonus the company includes a small magnetic level and a paper template for mounting holes that make the install job so much easier. I would not hesitate to use this TV mount again.

The media could not be loaded.  Perfect mount for my new 65 inch Samsung 8k TV. It's easy to install with 2 people about 30 minutes and has a nice range of motion including front pitch up and down. Easy to level for the perfect fit to your TV. Best $30 you'll ever spend on a full motion mount.It comes with a variety of bolts to connect to the back of your TV but of course none that fit mine. A quick trip to Home Depot and found that metric #M8 16mm with 2 spacers that where provided in the kit that fit my TV. Other then that a very easy installation providing you have a good stud finder.

I got this at a discount during Prime Day and it's a good mount even at the normal price. My TV is technically light enough to be used with a good single-arm mount, but there's no way I would trust a single-arm mount to support a large TV for years or decades. I instead chose to get a budget-priced 2-arm mount with good ratings and am glad I did as this mount indeed feels sturdy enough to last and can hold a larger, heavier TV in the future, if needed.The box comes with everything you need except for the drill and socket driver; it even includes stickers for attaching your template to the wall, which is weird, but nice. It has concrete anchors and multiple sizes of screws and spacers for VESA mounts. There is some flexibility in placement, though this mount cannot accommodate stud spacing much wider than the 16" standard used in most stick-frame construction.I found that the screws for the TV brackets were either too short or too long for use with the black spacers, but the short ones worked fine with the thin, red spacers and they aren't easily visible after mounting. The depth of threads on my TV's VESA mount were very shallow, yet the top pair were inset into the plastic somewhat, but this was not the fault of the mount and I give it credit for including a variety of mounting hardware.The leveling features may not be as easy to use as some of the more expensive brands as these require tools to adjust, but you typically only level the TV once anyway. I managed to mount and level my TV by myself, but I definitely recommend having help to lift and hang the TV and to hold it in position while leveling. Today's TV's are both fragile and expensive, so take your time, ask for assistance, and do not touch the panel or squeeze the edges when lifting; lift by the base and gingerly support the top or sides when moving your TV or monitor.The product information claims that the TV brackets have 2 vertical settings 4" apart, but the spacing is actually 3" apart; I did not detract any points as this is still a feature that many mounts do not offer and it's likely an inaccuracy creating during translation and rounding. It's nice to have the option.Note that I use REAL product ratings, as follows:1 star = useless, probably fraud. 2 star = poor, below expectations. 3 star = good, meets expectations. 4 star = excellent, better than expected. 5 star = best in class, a classic

Mounting to the wall is super-easy with the included template. Plenty of hardware for different TV VESA mounts. Firm joints. Easy to adjust, then stays put. Verticle angle locks.Out of all the TVs I've mounted this was the quickest and easiest.I recommend this product.PROS:- All necessary hardware- Easy to Mount with template and included lag bolts- Sturdy Construction- Fully Articulated- Vertical Angle Adjustment Locks (pictured)CONS:- Anchor Screws (pictures) Don't Actually Overlap Lateral Crossbar- Bubble Level Not Magnetic and very small so I didn't use it.

I always wanted wall mounted TV but didn't want to pay installation fee. The instructions were easy to follow. Everything is clearly labeled. The template and small level make it easy to line up mount holes. I was able to do it all by myself up to actually putting 49 inch TV on bracket. My granddaughter helped lift TV onto bracket. I am very satisfied with the sturdiness of this mount and movement range. Now I can kick back in recliner and enjoy some football!

This is a great kit. Packaged nicely with all the screws, bolts, and other assorted hardware in a plastic belt pouch, with easy to read letters and numbers for each pouch.It looks and feels well made. Just received it yesterday, so will amend review if needed.It was easy for me to install, but you will need some tools, but it does come with a little 4” level which is a nice touch.The instructions could use a little work but were easy to follow.The only nitpick I have is that you have to use an Allen wrench (included with kit) to adjust the vertical tilt. It would’ve been better if had a wing nut. This may not be an issue depending on how often you need to adjust it.Overall, buy it, it’s a great kit for the money.

The media could not be loaded.  Getting my flatscreen attached to one of these was a big deal for me because I’ve had one tv get destroyed by being knocked down before. I was uncertain about the pictures shown how sturdy these things were and what installation was like so I’m really focusing on that in my review as many other people have shown how it looks upon completion.These are a lot more than a piece of metal with bolt holes in them, they give my flatscreen a full range of motion as well as being firmly attached at both ends (the wall and the television)A lot of these are shown as being bought with stud finders and I’ve been worried about that until I unwrapped my wall mount.Why didn’t anyone tell me it comes with a template that shows me where my studs will be located? If you measure with it from the corner of the room, it absolutely works the first time!It also comes with a level. I did have one of those, but this was small and perfect to use for this job.The instructions are in English, the parts are a bit complex, but clearly labeled and numbered. The instructions are very easy to follow.There are two sets of directions, one for concrete/brick walls and one for wood and drywall which are the ones I followed.They recommend using a screwdriver for wood and drywall rather than a power drill. I’m not sure why, but I followed their directions and it was easy.I am so impressed by how easy these directions were to follow and what a cool piece of equipment this is to add to my entertainment room.It’s one of those things that once you have made it part of your life you can’t think of why you waited to long to get one!I haven’t tried any of the other ones, this one is solidly built, it’s strong steel and it comes with everything except a screwdriver (a philips)I like how I can now change the angle of my tv, if the sun is coming in or anything else interferes, I always get the best picture with minimum effort and my investment in my tv is safe.It took about 20 minutes to unpack, figure out all the parts, read the instructions and set it up and get the tv back on and playing again.Definitely a good buy and five stars

Awesome product for a really good price.

Great mount for the price, holds our 65 inch no problem, I find it easier to have helper on other side when turning and bringing out from wall, and when putting back in tight to wall, you can do-it-yourself just easier with 2

2 years in and still works good.

I have bought and installed many wall mounts over the years for big and small TVs but this is my first articulating wall mount. It is well made with sturdy materials. Installation was very simple. It's holding an older 32" Sony Bravia and I absolutely wouldn't have any reservations about mounting my 46". If you're looking for a articulating wall mount I highly recommend this one.