Bio Bidet BB-270 Hot & Cold Freshwater Spray, Non-Electric, Bidet Attachment For Toilet Seat, Posterior & Feminine Wash, Easy Install, White

The hoses are braided stainless steel so they are burst resistant. The temperature is easy to adjust (you do need a hot water connection nearby). The connections are standard US fittings so if the hoses need to be replaced, you can find them at a good hardware store.

We've had our BioBidet BBC-270 a little over a week now. I'm really happy with it.Installation:Installation was fairly easy: attach some T-joints, screw in some hoses, and you're up and running. The instructions are a bit vague regarding placement for some spacers and rubber washers but we figured it out. Took about an hour including cleanup time and drilling a hole in the vanity for the hot water hose (you'll need a 5/8" drill bit and a dremel or something similar to expand the hole a bit or a 3/4" bit). You'll also need a set of bumpers as it adds at least 1/8" under your toilet seat and it will have a noticeable slope without bumpers.Use:The bidet is simple and easy to use. There are three controls: angle (front, back or self-clean), water pressure--this also is the on/off, and temperature. I gave temperature control 5 stars because the control is clearly labeled and works really well, but the reality is that it takes long enough for warm water to start running that you're functionally using cold unless you go for a long rinse. Alternatively, if you run the hot water in the bathroom sink you can get a warm rinse, but that wastes a lot of water. This is a function of the amount of pipe between our hot water heater and toilet and has nothing to do with the bidet design.The bidet does a great job of cleaning. We're definitely using less toilet paper than before.Other:My only real complaint has to do with aesthetics. In order to accommodate a wide range of toilet seats the bidet has two adjustable spacers that line it up with the seat holes in the toilet. Since it does not match the shape of the toilet seat the bracket is noticeable under the seat and this gives it a bit of a college try aesthetic rather than a professional finish, but for $70 I'm happy. You'd have this problem with any bidet of this type, so unless you want to spend a few hundred bucks on a toilet seat replacement style bidet, this is something you'll just have to live with.

We ran a hot water line with shut off next to cold water. Works ok but not as powerful as my previous BIO BIDET cold water only model. Also temperature selection is not good. There is really only 3 useful temperature settings and that is middle or one click right or left. That equals lukewarm, cold, or hot. Anything else is scalding or just cold. Probably would try a different model for similar price first. That being said, quality is excellent. I bought because I love cold water one I have used for couple of years.Just moved it to guest bathroom.

Bought the original BioBidet, than upgraded to this one. Oh wow what a difference warm water makes. Great product, easy to read instructions and quick install.

This is one of the best purchases for the bathroom I have made. The temp control feature really makes a difference. This unit also has a pressure control goes much higher than other make and models. It also comes with 2x T adapter fittings to split your existing hot and cold water connections. This part is not carried at the hardware store and is super helpful to come with the kit.

I bought this November 10, 2020. It had a leak. I returned it through Amazon for a replacement.. no problems, these things happen. Fast forward to today. The bidet stopped working, no water coming through no matter how I changed the knobs. So I called up the support line. What happened next I can describe as hilarious. The support representative kept telling me to check the valve. There are two. I said "both"? She said: check the valve. I said "There are two, do I need to check them both?" Never mind that I used this two days ago-- the chances of a clog clogging up these two and nothing else in the whole house including the faucet and the toilet also hooked up to these is near zero. Just so you know, this is a temperamental installation. If you take things apart and put them back together, you'll be there for at least 15 minutes and monitoring it for days to make sure there is no leak. So I said, okay, let's say that there is no problem there. What happens next? She told me the next step is to disassemble your bidet and replace the internal valve yourself! So you basically have to spend hours fixing a problem with *their* manufacturing process, and in the process become an assembler for their system! That's Biobidet's idea of a warranty service! Stay far, far away from this company. Their warranty is sham unless your time has no value.

The product was fairly easy to install (about 30 minutes) with basic plumbing knowledge. I turned off all of the relevant water cut offs at the toilet and sink, wrapped all of the ends in plumbers tape, tightened the hoses to the adapter, and installed the pieces in my current plumbing configuration. Everything was pretty straight forward and intuitive, as I installed the entire bidet without consulting the directions.Myself, my wife, and my 2 year old daughter have all used it with delight. (It was our first bidet experience and we were all quite delighted at the convenience and clean).Some reviews mentioned non-standard sizing; however, this wasn't an issue for me everything lined up perfectly the first time with no leakage.I would highly recommend this product at it's current price point. The only thing that I believe could be improved would be the design. It isn't terribly aesthetically pleasing; however, I don't plan to go into my bathroom often for non "business" reasons so- functionally it's great and the aesthetics don't matter *that* much, but the profile could be slimmed down and the controls could be refined to a cleaner more streamlined look.

Since day one this Bidet started to have issues and show defects! First, it started leaking from the nozzle inside the toilet. Then few days later started leaking from the valves on the side! Then a week later it stopped working completely! No more water is coming from the nozzle or any spray. You turn on the pressure, but no water spray at all!I spoke with BioBidet support and she told me it is rare to have such defects! I decided to take her word and order again the same model as a replacement from Amazon. I should receive the replacement next week and send the defective Bidet at the same time. I will update this review after trying the new replacement.Keep my fingers crossed for now!==============================================this is an updated on my review above: I received the replaced of BioBedit. Dealing with Amanzon was very easy and quick to get a replacement. The new BioBedet-270 is install and running for a month till now and no any issues. It is working nice and I don't regret to stick to BioBidet and get the same model. The customer support at BioBedit was helpful and provided all the assistance and effort to help resolve the issue. I recommend it.

Tried several models of bidets from Mercola to Brondell and found this Bio Bidet to be the best for me because of the more fine tuned spray pressure (ie.does not hurt like Brondell), warm water option, clever clicking mechanism on the dial and thoughtful spray selection option. It was also easy to install. The only leaking problem I had was installing the bidet too close to the back of the inside of the toilet. The manual pull out cleaning feature of the nozzles accidentally pulled out slightly because it was too snug against the porcelain rim, creating a quiet, invisible and slow leak under the toilet seat bolt area and then down the side of the toilet pooling on the floor. It was slow because it only leaked when the bidet was in use ~ so beware of this when installing. Be sure to leave a small space between back of nozzles and toilet bowl rim to allow for the nozzles to be completely sealed when placing the bidet on the toilet.Excellent product for the money. I paid $69.95 Canadian on Amazon.caI also spoke to the Canadian rep for this company and was very impressed with his customer service and integrity.

I ordered and installed this product. I wanted to share my personal experience.Installation experience: PoorProduct operation: AverageProduct reliability: PoorCustomer service: PoorInstallation:I replaced my old bidet with this one from Bio Bidet. I was hoping to use the existing plumbing. I realized that Bio Bidet uses plumbing parts that are non-compatible with North American standards. Despite visiting the local hardware stores and several specialty plumbing stores, I was not able to find the parts to allow me to use my existing plumbing. Ultimately I had to redo the whole thing and use their provided parts. However, the downside was that if I run into any issues in the future with wear and tear and leaks, I would be in trouble.Product Operation:My old bidet had a faucet style handle for controlling the flow and temperature as opposed to this one which uses circular knobs that click as you turn them. When it comes to pressure and temperature control, I feel that the operation of my old bidet was smoother and more reliable.Product Reliability:Right after installation, I ran into a problem where the bidet would make a buzzing noise even though it was off. This would happen when the temperature knob was anywhere between the -2 to 2 positions. If the temperature knob was anywhere outside of this range, the noise would go away. Next would be by experience with Bio Bidet’s customer service.Customer Support:After I emailed my problem to customer support, they told me that someone would call me. Three days later I received the call and explained the problem. They could not offer any solutions and said that the only way to deal with this would be for me to send back the bidet first before they send back a replacement. They would not even consider exchanging it by sending a replacement unit first even as I offered them to place a credit card hold for the replacement until I sent them the defective one. They did not agree.For the bidet to be removed for several days and lave the toilet operational, the hose outlets had to be capped. But as I explained before, due to the non-standard sizes, I was not able to find the parts needed.I sent a follow up email with explanation of my problem and included a video of the problem so they could validate the defect. They never replied back despite three more follow-up emails.At the end, I do not recommend this product. The main concerns being the non-standard parts and the indifferent customer support.I have returned this product.

The pressure regulator seems to be very poorly made and only lasted a little over half a year. Worked pretty well for the price while it was operational.I highly suggest to steer clear of this unit and spend a bit more on something that has a metal regulator.

Just received and installed my bidet and it works very well...a new experience for sure. It still takes a while for the warm water to cycle through the system, so it's a good idea to run the "Nozzle Clean" option with hot water before using the "Posterior Cleaning" function. I plan on plumbing the hot water line through the floor into the basement where it can get a quicker route to the hot water versus the nearby sink.Regarding the connectors in the packaging...the larger connector fits onto the stem at the bottom of the toilet tank. Maybe that's why a previous comment regarding an incorrect connector was supplied. The smaller connector fits onto the hot water supply line under a nearby sink, as long as you have a 3/8" compression fitting there...else you may have to install one. The hoses are nice braided steel, so durability shouldn't be a question here. These hoses don't seem to be a standard size thread (not 3/8") and aren't interchangeable with the ones you can buy at Home Depot and the like. If anyone knows what size thread these are, please post for others.I marked this item as four stars, as I'm not sold on the connectors' quality. I don't feel 100% sure if they will provide a long term leak free experience, but the bidet works awesome.Update: I ended up connecting the hot water line directly to the water supply line closer to the hot water tank for a more secure fit. It makes me more confident in the long term. Fyi, the unique size fitting is M12 with a 1.75 thread.