✨ Never lose your sparkle again!
The Likimar Ring Size Adjuster is an innovative solution designed to fit rings that are 0.5-1.5 sizes too big. Made from soft and flexible TPU material, it provides a virtually invisible fit while ensuring comfort. The set includes 8 assorted sizes, making it suitable for both men's and women's rings, and it accommodates ring widths from 1mm to 10mm. Each package comes with user instructions and a silver polishing cloth for added convenience.
Package Dimensions | 10.6 x 7.3 x 1.2 cm; 10 g |
Number of pieces | 8 |
Batteries required | No |
S**Y
Does the job nicely
I was a bit sceptical of the number of good reviews that this ring adjuster had on Amazon, but decided to try it as I needed an adjuster for a 10mm band ring and this was the only one I could find at that size. The package arrived the next day and was exactly as described. The adjuster is a piece of fairly hard plastic which bends enough to fit inside the ring and hooks over at the top and bottom. If the ring is still loose, there is a sheet of thick clear stickyback plastic that you can cut to size and stick in the adjuster. I found the plastic adjuster falls out when I take my ring off but when I am wearing the ring it feels secure and doesn’t spin round. It is comfortable to wear and I don’t even notice the adjuster. I agree with other reviewers that it would have been good to just have one size in the package, but that is a minor complaint. I am very happy with the adjuster, as it means that I can wear a ring that was much too big for me and I would happily recommend this product.
A**R
Invisible, comfortable and good quality
Very pleased with my purchase. I have slim fingers with large knuckles, so I need the largest size ring band to fit over the knuckle and then it constantly swings round!The adjuster makes my ring fit much better, although not perfectly. I've seen people complain the tape is tricky to use, but you don't *have* to use it unless your ring is still too loose with the adjuster. You can put the adjuster on before or after the ring, although it's much easier before, and you can just leave it on for the next wear. Sometimes I have a hard time putting the ring on and taking it off with the adjuster still in, but like I said, embarrassingly large knuckles are the problem, rather than the product. I can always take the adjuster off first, if need be.Personally, I like that there's a variety of sizes in the pack, as it means next time I buy a ring I know I'll be able to make it fit, even if it's slimmer or a chunkier than the ring I purchased these for.
A**R
Brilliant!!
Recently got engaged and my ring is slightly too big, but a smaller size is too small. These ring adjusters are brilliant and now the ring fits snug and doesn’t move.....woo hoo! Really pleased as in the summer when my hands swell I can take the ring adjuster off which makes these really versatile. The sticky sheet for me didn’t work well - I found it quite tricky to cut to size and also when I washed my hands it just peeled off. But the plastic adjusters themselves are fab and although they stick out slightly, for me this is a bonus as the ring is protected. Would 100% recommend this item! Great little buy!
L**Y
Works great for skinny fingers with big knuckles, but no need for pack of different sizes
This review is for the clear ring spacers that fit inside the ring (not the cheaper spiral version).I have bought this product twice for my loose engagement ring. I have skinny fingers so my ring is the smallest size that will fit over my knuckle, but this size spins and feels loose on the base of my finger. This is especially an issue with an engagement ring because they tend to be top heavy anyway and want to slide round.The first time I bought this was earlier this year (April 2019). The product was in a slightly different form then, and there weren't as many small sizes. My ring is 1mm width and there was no spacer to fit it but the smallest size did an ok job. I put my ring on first, then fit the spacer underneath. At night when removing the ring, I slip the spacer out from underneath first. I can't get my ring on or off my finger with the spacer in place, so I imagine the difference in size must be equivalent to one ring size or more. I made the mistake of cutting the ends off the spacer in my first pack because I felt the spacer was too long and was visible at the front as it was coming round the side of my finger. This was a mistake as the spacers then wouldn't stay in place and the edge felt uncomfortable.I finally got round to ordering another set of spacers in Dec 2019. This was an updated pack with smaller (narrower) sizes. There is one that fits my ring perfectly (it must be around 1mm). I've been happily wearing this for two weeks now (same method as before - wedging it under the ring after putting my ring on my finger). The spacer is a little long and is just slightly visible from the front (I have small fingers so I imagine those with larger hands won't have this problem). I know from previous experience not to be tempted to trim the ends, though! The spacer does pinch slightly at either end and when my hands are warm and puffier, I notice this more. I guess its a natural effect of the spacer being bigger than the ring so it presses in there so it's not totally comfy all the time. It's definitely less annoying that the ring spinning and moving all over the place.Buyers should bear in mind that the spacer will only correct by a small amount - very loose rings or rings that only need a tiny adjustment will probably not work well with this product. The different sizes are to reflect different widths of rings, rather than a different amount of size correction. It is ideal for the issue of large knuckles/heavy engagement ring stone as mentioned. So, if your ring is almost perfect but not quite or you have the knuckle issue then this should work great for you. All the negative reviews saying that the ring doesn't go on the finger with the spacer are either trying to correct too small a difference or they haven't tried putting it on after putting the ring on. It's a little fiddly doing it this way but you get used to it.The seller recently contacted me to say that they are further updating this listing to allow customers to buy individual sizes. This is a great idea, and I'll update my review if that planned change goes ahead, because it will mean this product will be much better value for money!
A**R
Waste of money
Used the correct size for my ring which was loose fitting, it was okay for the first day. Second day I noticed my ring had turned on my finger and noticed the ring adjuster had fell off, luckily I didn't loose my ring!! Waste of money.
E**R
Genius
The media could not be loaded. This is brilliant.My video shows the ring with the adjuster on, me taking off the adjuster whilst still wearing the ring and then what the ring looked like on my finger without the adjuster.I got engaged in 2020 and my ring was too big. I had it resized but it is still loose. With my wedding not too far away I didn’t want to risk not having the ring back in time, hence the purchase of this adjuster. It is also costly to have the ring resized.I am SO impressed with this product! Super easy to take on and off and you can’t really see that it’s there. In the video I take the adjuster off whilst I’m wearing it, I think this is good to show in case you get worried your ring will get stuck on your finger whilst wearing :)For reference I’m a UK i ring size, I used the smallest size and it was nice and flexible to fit. I think it’s great you get the selection as one size will not fit all.
B**
Discret
Super pratique et discret, s’adapte facilement
M**L
perfect
makes my ring fit perfect
D**
Ringverkleinerungen
Die Ringverkleinerungen sind super
J**A
Cumpre o que anuncia.
Cumpre o que anuncia, superou as minhas expectativas! Super discreto, quem não sabe jamais repara. Serve apenas se o anel não estiver demasiado largo, uma vez que o adaptador não é muito espesso. São 8 adaptadores, um pano de limpeza e uma fita adesiva para colocar na ranhura do adaptador, caso o anel ainda se encontre largo. É um pouco complicado colocar uma fita adesiva dentro de um adaptador fininho mas funciona. Já é o terceiro método para reduzir o tamanho de anéis que experimento e este é, sem dúvida, o que melhor funcionou comigo.
G**.
Very good
utilizzare la strisetta con la colla verso l'iserto, quindi incollarla sull'inserto e non sul gambo dell'anello. l acquisire un po' di manualità nel reinserire l'inserto, sì perchè ad agni lavaggio delle mani si ficca il sapone nelle pieghe creando inestetismo, quindi va sempre e comunque tolto e rimesso per lavarlo con acqua.All'inzio non sapendolo usare ho graffiato un po' l'anello al gambo.Comunque funziona alla grande!
Trustpilot
1 day ago
1 month ago