WP3100C Weatherproof Electrical Outlet Cover - Extreme Temperature Resistance, Heavy-Duty Construction, Versatile Design & Multi-Configurable, Easy Install, Secure Fit for Outdoor in-Use

Easy to install, fits and works as it should. Well-made and nice looking. No problems or issues.

It worked perfectly. Installation was simple. Good product.

Excellent quality. Easy to install. Plenty of options for mounting. I'd foolishly been simply placing a bucket over my the outdoor GFCI outlet that was mounted to a post several feet from my swimming pool. Have probably ruined 3-4 good five gallon buckets over the years that got brittle and busted from a combination of being constantly exposed to super chlorinated water (used it to mix my powdered chlorine granules before adding to the pool) and sunlight. I spent the $7 and picked up one of these. It was super easy and straight forward to install. Looks very nice. Does exactly what it should do... keeps my outdoor GFCI outlet secure and protected from the elements. Doing it the other way not only cost me a few good five gallon buckets over the years, but three different GFCI outlets that went bad due to exposure. I figured this would be the last time I wired in a new outlet and decided to put the proper weatherproof box on it.

Looks great, seems durable, mostly functional. Bought this to cover the outlets that I plugged my permanent home lights into and it definitely will do the trick. The package itself does not come with any instructions at all but the amazon listing has great instructions within the photos so I used those for the install to make sure I did it correctly. Appears to be fully weatherproof and seals up nicely. The cord hole pieces were relatively easy to pop out with pliers. Might not be large enough to handle all plug types but it certainly works for what I needed it for.

Figuring out how to install this was easy. I have never done anything... constructively or install things, but I figured this out and it has protected my outlet so I must have done something right (I was also replacing one so I didnt have to find the hole to drill). I know this because the seal is good and my outlets haven't tripped since, and there have been pretty bad rain storms. I debated giving this 4 stars due to the trouble of removing the cover to change the direction. It was really hard to take off the hinges to change from vertical to horizontal, so much so I even broke a fingernail doing it. But that goes to show how sturdy it is, it is strong and that is something you would want in something that is outdoors. So five stars it is.

Good product. It fits great on outlets cut into siding on the side of a house. No problem there. There are a couple of considerations. First, You most likely need to pop out the existing and installed hard, rigid plastic plate inside the box. If you have a square outlet (example: GFI) or a rounded side outlet-pick the right black plate supplied and put it inside the box. Instructions are meager. It says snap in place but it simply fits and will be loose until you fit the eyelets over the screw heats and put down. You do not need to remove any outlet mounting screws but you do need to loosen them out a bit to fit the cover over the round screw heads and then fit the inside black plate you are using to match the design of your outlet. Everything gets moved to one direction so the screws travel into a narrower channel of the eyelet. You will see. Tighten screws. Be sure you left the back foam cover on the box. Second, before you even do anything, use needle nose or flat nose pliers to remove the punch outs for your cords. It is MUCH harder to remove the punch outs when the box is installed. It is much easier to hold the box in your hand and wiggle and pry the punch outs out. If you follow the sparse installation instructions, there is no mention of the punch outs needed to come out. Obviously there are two outlets so remove both punch outs unless you think no, you will never use two outlets at once. If you do not remove the punch outs, you cannot close the plastic cover and thus you are defeating the purpose of the cover. Third, It is a little unpleasant to snap in the clear plastic cover hinges onto the cover's hinge rods. you have to come in at the 2 o'clock position forward and push. You will have two snaps and do not panic. That means the hinges are in. There may be a small potential to break the hinges. You do not need lots of pressure. Just a small amount of firmness. The good news is once you snap your cover on, you know the drill and any other installations come easy. Be sure to install the punch outs facing down. That means you have the box right-side up

I wanted the closest guarantee to zero failures on a specific electical outlet that we just had installed. We decided to add Intermatic WP3100C Weatherproof Electrical Outlet Cover - Extreme Temperature Resistance to reduce any possibilities of weather interference. We have achieved our weatherproofing goal. Easy fit standard single gang cover with selectable molded switch/outlet plates. The installation is easy and very straight forward. No additional components are needed. This will cover one standard single gang outlet box.

They are ok, but don't seal. They will probably be ok, but not as good as what I had. I wish I would have used the same brand I had, I just needed to switch the outlet

Works well and easy to install

The weatherproof cover was easy to install and does the job. It feels sturdy. We live in a climate with heavy snow and rain, so we added a silicone sealant around it for extra protection, just in case.

Very nice covers, well built, easy to install.

This is a really wonderful outlet cover. I replaced an older one, which was not an "in-use" style. This one may not even need any caulk around the edges, because there seems to be a good seal all around, but I'm going to do it anyway, to cover up the discoloration from the previous caulk. This cover allows an outdoor-rated extension cable to be plugged in all the time. It's a tight-fit but it all works. Now I can control the lights on my pergola without having to go outside to plug it in. It has already weathered several storms in just the last few days. The fact that the cover is clear should allow me to see if there are any problems in the future.

This outdoor outlet cover has been great for keeping plugs safe from rain and snow. It feels sturdy, seals well, and gives me peace of mind knowing everything’s protected outside. Installation was simple, and it doesn’t look bulky or out of place. Definitely worth it if you need a solid weatherproofing solution for your outlets.