Pelican1200 Case With Foam (OD Green)

I bought this Pelican case for storage and security of my Glock 17 at home. The case is just right for the size of the pistol and could accommodate three total magazines. Either one in the pistol or all three side by side (if you plan it out right). I marked the foam with a marker and trace cut it with a knife. Used scissors thereafter to cut the foam out to the depth I wanted. Easy enough. The foam, case construction, and everything else in between is excellent. I use these cases with my job and they're nothing short of durable. I personally can attest they can survive and remain intact under extreme direct loads. Anyway, this was just what I needed for home. Tossed two long shank locks on the case and good to go.

Pros: Well built, hardy, tough, easy to configure, aftermarket support. Will fit a 4" barrel or smaller semi-auto (think P229 or smaller) with room for magazines Two strong locking points and very tight gasket is sure to protect from water.Cons: Will not fit a Beretta 92FS 4.25" barrel due to beaver tail to muzzle length being to long. (this is the firearm I intended it for) The internal size on the description was misleading because YOU MUST DEDUCT 1/2-3/4" from the INTERNAL DIMENSIONS to get an idea what will actually fit inside.I gave 5 stars because, if I had known about the internal dimension issue, this would have worked just as well as my 1450 and 1500 siuze case that I use regularly. This will fit a P229 (and maybe a P226 w/o beavertail) and still have room.If you have this, go with the 1400 (slightly bigger case length)

This is a great little case for a camera or small handgun or whatever. I’m using it for night vision scope I purchased and it fits perfectly. Very easy to cut out whatever shape needed for the device your putting in it. It’s built like a tank and waterproof as well. There’s holes to place padlocks if needed. Overall I love pelican cases! Perfect for fragile electronics or weapons etc...

Just for clarity... the dimensions listed are the *outer* dimensions. Good to know for storage purposes... but the usable inner dimensions are 9.25" x 7.12" x 4.12" per the Pelican box. I've read that Pelican recommends keeping about an inch border on the sides for shock absorption, as well as for foam integrity if your taking your contents in & out fairly often, so just keep that in mind. This size worked great for my needs which was a camera speedlight and vertical grip. If you have nothing more than an SLR camera, this should probably work just fine too. I'll also be cutting an additional foam base for the range, as it makes a perfect size (and color match) for the OD Green Springfield XDM 4.5" + 2 mags. Beyond the extreme protection, responsible gun owners will like this for safety and the ability to lock the case in not one but TWO points, with up to a 1/4" diam. padlock shackle.Rock-solid and Pelican all the way. I love the strength and feel of it. This is my first one... the first of many more!

I got this specifically for airline travel. The box fits my M&P Shield .45, spare mag along + S&W EZ 380 with spare mag and a 20 round box of ammo. With this all in the box, it was a squeeze, but works. The airline process is such that the box then has to go in the checked luggage, so a bigger box means less room in the luggage for other stuff. The box is standard Pelican quality. I recommend a cable to attach the box to the luggage itself, to prevent sticky fingers from removing the box from the luggage, as the bag is tagged as special, making it a target.

There are few things made of better quality than this case. If you have anything of value that needs protection from the elements this is the case and brand for you. Don’t settle for anything less. Case is awesome. Pluck foam is easy to shape and remove. I traced out my device with a scissor. It fits perfectly. Highly recommended and it is made in the USA !!!

After being horribly worried about my first time flying with a firearm, I decided to go with a better constructed case. This case fits the bill perfectly. Hard plastic construction with weatherproof seals and two hole for locks on either side of the handle. I was able to fit my full size sig 9mm, a box of ammunition and even had room for two extra magazines. The pick and pluck foam was great. I pulled out the outline of each item and then just cut to fit the height. The TSA approved the case with my two locks attached and I never had a problem. Great product and I would highly recommend!

use for camera case. great quality.

This case was amazing I used it for my DJI Maverick Mini I was able to fit all my Chargers a block extra propellers a spot for extra batteries the actual drone the controller and I could fit many more things in it so if you're looking for a case for the Maverick mini I would suggest this one took a minute for me to say all the things to it but it works

Me encantó el material con que esta hecho, se ve robusto y su interior con esa esponja se amolda a todo lo que quieras meter, en mi caso lo ocupe para guardar lentes para cámara fotográfica y súper fuerte, todo un tanque...

muy bueno altamente recomendable

Great quality case. I have purchased 6 of these cases so far I believe. I use them at work to protect very expensive GPS equipment used in heavy construction equipment. They are water tight, allow for easy custom sizing and come in a variety of colours which is nice when tagging each piece to a different equipment as it allows me to identify what is in each case with opening. And allows my operators to know which one belongs to them. We work in a all weather conditions, lots of dust, water, heavy vibration and so on. Pelican is one of the only brands I trust to keep our equipment safe. They do seem expensive but really you have to think of what your protecting. Our monitors I store in these cases cost upwards of $20,000 so this is a small price to pay for the peace of mind that the equipment is properly protected. My only comment on the negative is I don't understand the price difference between colors, I feel that is foolish but it's not enough for me to remove a 🌟

ペリカン１２００はオレンジも購入して使っていますが、こちらの色は特に気に入っています。なにげないシンプルな風合いはそれだけで精密機械が入ってる感じがして気に入っています。