🔗 Hitch Up with Confidence!
The CURT 21100 Trailer Hitch Ball Hole Reducer Bushing is designed to reduce a 1-inch diameter hole to a 3/4-inch stem, allowing for the use of trailer balls with smaller shank diameters. It features a durable yellow zinc-plated finish for enhanced protection and comes with a limited lifetime warranty, ensuring both quality and reliability for your towing needs.
R**.
Awesome
Worked perfectly
P**N
made an easy change
Since my camper only needed a 2 inch ball this bushing meant I didn't have to buy a new hitch.
W**R
Fits Loose
Quite a bit of slop between bushing and hole in hitch. Didn't have time before trip to do anything but use it. Didn't have any problems. YMMV
H**R
Works great on hitch with ball hole too large
Used as advertised & worked great
M**D
Excellent product
works perfectly to make your 3/4" ball stems fit in a standard 1" stinger hole. It eliminates that jiggle you would normally get.
K**K
good
good
S**N
No good reason that this bushing be so thick
Was about 1/16 or so thicker than the new hitch ball adaptor, required grinding off flush to tighten the ball. No good reason that this bushing be so thick, it is just there to center the shaft, not load it.
B**3
No More Sloppy Ball Hitch!
This Little Bushing is Just What You need,if Your using a Ball with a 3/4" shaft in a 1" Mount.Takes up that extra Gap and makes Your Hitch Ballmore Secure!Cheers! Curt>~iii~<(
G**F
This reducer is necessary for a trailer hitch ball with a smaller threaded shaft diameter.
This is a reducer 1/2" (height) reducer ring that is inserted into the 1" diameter hole of a trailer hitch. The reducer had an inside diameter of 3/4". This enables one to install a trailer hitch ball with a shaft diameter of 3/4" in a trailer hitch arm with a 1" diameter hole. The reducer ring is coated for resistance to weathering.
Trustpilot
1 day ago
1 week ago