EONBON Misting Nozzles 1/4,Mister Nozzles 12pcs with 10 pcs Thread Misting Nozzle Tees and 1 pcs Plug,for misting System for Patio and Garden

This product sucks. I bought 1/4 inch tubing. When installed water comes out of every corner of these fittings.Updated review. Don't buy 1/4 rubber drip irrigation tubing. Buy 1/4 inch vinal tubing. They work perfect now.

The push connectors are great. I had considered more of a homemade setup with PVC pipe and mister heads, but this was far cheaper and more simple in the end. In the two days I waited for the delivery, I pre-cut the 1/4" tubing. Ran the connection from hose bib to gazebo, up the gazebo leg and the zip tied the tube sections between sprayer locations - 3 per side on a 10'x10' gazebo. When the kit arrived it was literally a 15 minute process to pop in the connections, flush the line and add the heads. One seemed to plug up immediately, so I unscrewed it, blew it out backward and screwed it back in. This is the coolest my pool deck has been all week.

***EDIT: I have photos I'd like to share but this won't let me add them for some reason.***I've had these for about a week and they're doing well so far. They came in a small box, 10 pieces each with 2 extra brass mist nozzles. I bought a bunch of 1/4 inch drip system tubing and a 1/4 faucet connection at Home Depot for cheap and strung them up around my patio and down to my fan. I used plumber's tape at each connection to ensure no dripping because these are slip-lock.The mist is fine and feels very nice, however, because my psi is lower any slight breeze pushes it away easily.

I added these to my current misting system. I cut the tubing where I wanted to insert the new valve and the tubing kept slipping out. And yes, I am using to correct size tubing.

The nozzles are exceptionally easy to assemble & 'slip fit' to 1/4" tubing. Once the tube is inserted, it locks in well. I had one connection that leaked - I slipped it apart, found a jagged end on the tube I cut, recut cleanly, inserted & no leak.There aren't any instructions & for the most part not needed. If you haven't used slip fittings before..if you ever need to remove the tube, push in on the tube & hold back on the little ring on the plastic body - the tube will come right out. Do it once & you'll remember forever.The little brass nozzles are really nicely made - not sure how they can produce them for the price.

Easy to replace clogged mister heads.

Positives: Easy to install and removeNegatives: Drips leaving puddles of water. Disappointing,

I shopped around a ton and these are exactly what I was looking for. Easy to install and fine mist. As with any misting setup, be sure you use a filter.(I saw other reviews that said they are not removable. This is not true. They can be disassembled just as easy as they are put together)

N/A