Meguiar's Gold Class Car Wash - Get Professional Results in a Foam Cannon or as a Bucket Wash - Get a Clean and Glossy Finish That's Safe for All Paint Types - 64 Oz

I think the photos can speak for themselves. I love the smell of it, my car is sparkling I can see my reflection on my car I would say it works very well, the cleaning I can see right through my windows like they are rolled down or something.

This simply the best all around soap out there for washing cars. I've been using it for years on various cars, and I've yet to find something that works better. It helps bring my Evo to a show worthy clean and shine.A couple cap fulls of this in my pressure washer bottle suds up great, same with my Gilmour Foamaster. It does a great job at cutting through mud and dirt, and even bird droppings if you get to it soon enough. Where I live it rains 2-3x a week so I try to keep my car waxed to reduce washes, but I still end up washing it down once every 1-2 weeks. If I stay on top of it, with this and my pressure washer - I don't have to touch my car with a mit or towel for cleanings. This works that well to clean a car of all dirt, grime, and bugs. However if you let it go a month and it's not waxed, then you'll probably have to mit clean it. The only time I use a different soap is usually the first couple weeks after a wax (assuming it's not caked on dirty somehow) I use Meguiar's Wash and Wax - 48 oz. to preserve the wax job and bring it back to a little more of a shine.To wash - I highly recommend a cheap electric pressure washer with a soap bottle. You can find them around 100-150$, and if you frequently wash your car it's well worth it. My philosophy is the less times I have to touch my car the lower probability of miro-marring and swirl marks. If you have to mitt clean, do as high powered of a rinse you can with a hose to get off the bulk of dirt. I then recommend the Meguiar's Microfiber Wash Mitt, use two cheap 5 gallon buckets (you can get them for a couple bucks from HomeDepot), with a The Grit Guard Insert (Red) - Fits 12 inch Diameter Bucket at the bottom. One bucket is clean rinse water the others your soap dunking water. The important tips I've found for avoiding marring is to frequently rinse and soap your mitt - don't let it start to get dry of soap/suds. Every single time you're about to rinse the mitt run your other hand over both sides and do a visible inspection, pick off ANYTHING you see. Rinse it, scrape along the grit guard if you need to, re-soap the mitt, then do another run of your hand against it and visible inspection. I can't tell you how many times I've picked something off the mitt, like a small piece a dirt or pebble or leaf/twig part that would've likely marked up the clear coat. Also usually you do not need to apply a lot of pressure, even for caked on grime. Lightly drag it so if there is dirt on the mitt it's less likely to scratch. The only other advice I have is to use at least 2 mitts per car. Reserve at least one for any hotspots on the car that get a lot of dirt - like around your rear wheel wells, rear bumper around exhaust, maybe even your front bumper if you've got it caked with bugs from a long road trip. I save those spots for last with the separate mitt so it keeps all that gunk out of the buckets and off the rest of my car. It's also useful to have another mitt if you drop yours on the ground or it touches any high dirty areas, it's great to set it aside for the washer and use another for now.I usually use a CRSpotless DI filter system to rinse the car off afterwards to a spot free shine. I have however used this and just hosed it off afterwards, and it does a pretty decent job by itself at leaving a fairly spot-free shine (obviously not completely). I'd say it's better then the Mother's wash I tried in this regard. Otherwise it's pretty comparable to the Mother's wash, although I tend to think this cuts through caked on dirt just a bit better. If you don't want a CRSpottless system you can buy the big blue filter housing and a DI filter to build your own for around 100-200$ (I did this after my crspotless system cracked over one winter). If you go the towel dry method I'd recommend Meguiar's Water Magnet Drying Towel - you'll have to ring it out a couple times (maybe buy two), but it's soft and pretty safe to use. Just make sure you don't let it touch the ground or anything else covered in dirt - or you will mar/scratch it during drying.

Very high quality soap. I have PPF and it leaves it looking like new. It works well and is high quality. It also only takes a small amount to foam if you use a foam sprayer.

Use this as specialty car washes is costing more. Does a good job; I used a foam cannon and this suds up well. Cleans well although not strong enough to clean without using a mitt.

I bought this bottle in October 2021 and still have just over a quarter of a bottle left. I use it a lot more in the winter so I’ll probably have enough to last until mid summer next year. I wasn’t using it as often as I am now that I tried it in my hand pump foamer and WOW! My car was full of road grime and salt and after using this stuff as a presoak in my little cheap pump foamer, I was amazed! I let it soak for about five minutes and pressure rinsed it off. The car came out spotless with no dirt film at all. I didn’t even have to agitate soap with a sponge. This stuff lifts the dirt right off. Foam, dwell, rinse, and it’s done. I even used a brand new yellow microfiber towel to dry it and had zero dirt in the towel. This is perfect for keeping your car clean and your hands thawed in the winter. Pretty much no contact other than drying and even then, I use my leaf blower on it.

I was skeptical about buying this and, after my first use, I was completely convinced and surprised at how good it works. The suds last longer than some of the other products I’ve used and it rinses off easily. It also smell great. I love the amazing sheen that it gives my car. I highly recommend this product.

Makes lot of suds and cleans well.

Good product .. I wash my truck once a month .. I use this with cordless Worx washer pressure spray tool with spray foam attachment .. I just water my truck and spray this product around and over .. leave for a few minutes to let the chemical work on the dirt .. remove attachment and spray water to clean out all the foam .. then use sheepskin sheet to dry out .. it keep my car shinny after washed .. little work but good exercise ..