AstroMaster 130EQ–MD Newtonian Reflector Telescope for Beginners – Aluminized Mirror – Motor Drive to Track Stars – Adjustable Tripod – Includes Eyepieces Plus Astronomy Software Package

So there's been a lot of discussion in the reviews about if this is a beginner telescope or not. As a person who never touched a telescope (except maybe in high school a thousand years ago) until I decided it was something I wanted to try out this year, I emphatically say YES! This is a great beginner scope. Here's the problem with most people's definition of a "beginner" anything. They want it to be rock-bottom priced, and ultra-easy to use. The problem with this mentality, is that often you go so cheap that you wind up getting a product that does not really expose you to the prospective hobby, and while trying to find something ultra-easy to use, it winds up being extremely difficult because it lacks the more expensive tools that were specifically designed to enhance the human ability when performing certain tasks.... NET RESULT: You wind up putting the hobby down out of frustration without ever really trying it out. I think the reality with getting into telescoping (is that a word?) is that you have to first decide that it is something you truly want to try, so that you don't go by a $74 telescope at W*****t (like I did) and expect to actually be introduced to this hobby. So after trying the $74 failure I got this scope due to the (mostly) good reviews, and because of the brand name. Never being in the hobby myself, I still had heard of Celestron. Many reviews showed broken parts. This wasn't the case for me. Everything was intact and assembly was relatively easy for a novice. A few reviews said this was not a beginner telescope because you had to adjust the mirrors, which apparently was a very difficult task to do. I researched this requirement ahead of time, found that for just over $20 you can buy a laser collimator that allows you to do this adjustment in just a few minutes, and decided that wasn't too much to ask to have an opportunity to enjoy this hobby. P.S. when I got the telescope, I used the laser collimator just to find out that the mirrors were perfectly aligned and I didn't need to do any adjusting. But apparently mirror adjusting is inevitable with Newtonian telescopes, so I'll just keep the laser collimator in my kit bag. Now about the beginner using this scope: 1. The red dot starfinder is a life saver! At first I thought you could just look through the starfinder, see what you wanted to look at, then see it in the telescope. NOPE! You really need that red dot to put the object into the site picture of the scope (especially on a low MM eyepiece). My only complaint might be that I couldn't perfectly adjust the red dot. When I first got the scope I focused in on a house way down the street, then tried to calibrate the red dot so that it was pefectly centered on the center of what I saw in the eyepiece... It was close, but wasn't perfect. HOWEVER. It is more than sufficient for my beginning level telescoping. With my $74 flunkee scope, I would use the cross hairs to try to align the scope to an object, yet even on a large MM eyepiece I could never find anything smaller than the moon! With this red dot starfinder, I have (easily) been able to align the telescope to both Jupiter and Saturn. 2. I may have started of with the starfinder, but the equitorial mount is probably the show winner with this thing. Not to keep referring to my $74 fail, but it is good to have a frame of reference when explaining why sometimes you have to make an investment even for entry-level equipment into a hobby. The $74 fail used a super cheap camera tripod. Problem with these tripods is they don't adjust at a fine enough level to make the small changes to put an object into the site picture. And, despite the fact that the cheap scope didn't weigh anything, it still would drift on the tripod... basically making it impossible to do anything except look at the moon. The Celestron is big and heavy, yet the EQ mount holds it masterfully in position, but the real winner is the fine tuning knobs. I didn't realize just how fast objects move in space (I mean.. I get it. The earth is spinning at 1000 mph, I just never put that together to mean objects move out of a telescope site picture QUICKLY). But with one hand on the fine tuning knob, I can follow the object for a reasonable amount of time to enjoy viewing it. NOTE: I recently bought a motor that I am suppposed to be able to connect to the knob, so that it can automatically hold the picture for me (again... spending more to get the right tools to enjoy the new hobby). Only complaint I have is that one knob seems to be able to adjust indefinitely while the other can only change maybe 20 degrees (10 in each direction) before it hits a stop. After additional study, I think this is because space objects only move in one direction, so if you properly polar align the scope, you should only need one knob to get the object where you want (left and right) and then not touch that again, then solely use the (up and down) knob to follow the object as it moves in the sky... but hey.. I'm new.. I'll learn to use this better too :-) Other than that, the only thing left is the scope. Like I said, I've looked at Jupiter, Saturn, Moon. I can't really speak to the provided eyepieces. Understanding from my research about focal length, and deciding that as a beginner it would help if I had an adjustable eyepiece (so that I can start zoomed out, find the object easier, then zoom in), so I bypassed the provided eyepiece and went straight to a x2 barrow with an 8-24mm adjustable eyepiece. So far it's been great! Saturn is still a little small, so I'm going to see if I can go even smaller on MM and higher on barrow zoom to see if I can really clearly make out the rings. ....but do you see what Celestron did? They created a (relatively) affordable telescope that grabbed my interest in the hobby and now I am full on exploring new ways (EQ mount motors, higher zoom barrow, lower MM eyepieces) that I can explore the universe above!

Already I have had opportunity to do a few tests of this telescope and can comment to them that the image is excellent. The construction and the design is robust enough. Only I found two negative details of design. First the screw that is used for adjustment of this latitude evil designed. When one increases the latitude due to the weight of the this assembly it becomes hard to manipulate and when one tries to diminish the latitude, that is to say to slacken the screw in order that the set goes down, the plastic piece separates of the metallic screw turning out to be very inconvinient to do that the assembly goes down almost to the point of remaining united. I come second, the unions of the tripod of stainless steel to the assembly are plastic, these should be metallurgies to give him better permanence in the time. A recommendation for CELESTRON, they must improve the protection of the packing of the Mount CG3, it(he) is not alone to put it in a box without any protection, this one should come protected by rubber(gum), to avoid what happened to me, that in the sending(parcel) and due to the weight of the mount, the mount I strike and there was doubled the screw of Slow Movement in DEC. Lamentably I cannot do claim for guarantee since I am in Venezuela, and the costs of movement going and return of the equipment(team) they be be very high in comparison with the cost of the Telescope. I do not still have mas remedy that to try to repair the piece. David Trujillo P. Barquisimeto, Edo. Lara Venezuela Español. Ya he tenido oportunidad de hacer unas pruebas de este telescopio y les puedo comentar que la imagen es excelente. La construcción y el diseño es bastante robusta. Solo encontré dos detalles negativos de diseño. Primero el tornillo que se usa para ajuste de latitud esta mal diseñado. Cuando uno incrementa la latitud debido al peso del montaje este se torna duro para manipular y cuando uno intenta disminuir la latitud, es decir aflojar el tornillo para que el conjunto baje, la pieza plástica se separa del tornillo metálico resultando muy incomodo hacer que el montaje baje casi al punto de quedarse trabado. Segundo, las uniones del trípode de acero inoxidable al montaje son plásticas, estas deberían ser metálicas para darle mejor durabilidad en el tiempo. Una recomendación para CELESTRON, deben mejorar la proteccion del empaque de la Montura CG3, no es solo ponerlo en una caja sin ninguna protección, este debería venir protegido por goma, para evitar lo que me pasó, que en el envío y debido al peso de la montura, la montura se golpeo y se dobló el tornillo de Movimiento Lento en DEC. Lamentablemente no puedo hacer reclamo por garantía ya que me encuentro en Venezuela, y los costos de traslado ida y vuelta del equipo serían muy altos en comparación con el costo del Telescopio. No me queda mas remedio que tratar de reparar la pieza. David Trujillo P. Barquisimeto, Edo. Lara Venezuela

Il pacco è arrivato con un giorno di ritardo, avevo pagato la spedizione 1 giorno ma qualcosa non ha funzionato, poco male Amazon mi ha restituito la differenza. Assemblato in un oretta buona senza problemi, il quick start e il manuale sono in inglese ma sul sito Celestron trovate anche il pdf in italiano, il tubo è arrivato collimato dalla fabbrica e sembra ok ma comprerò un tool di calibrazione. Mediocri gli oculari specie quello da 10mm (lo stesso in dotazione al Travelscope70), il 20mm è utilizzabile anche per la visione terrestre ma il raddrizzatore incorporato si mangia luce se comparato ad un mio oculare Celestron 20mm budget puro (20mm in dotazione al Travelscope70). In questa fascia di prezzo è comunque normale dover sostituire gli oculari con prodotti di maggiore qualità. Vi ricordo che state comprando un telescopio a riflessione quindi l'immagine appare capovolta, questo non è considerato un difetto in astronomia poichè nello spazio non esiste l'alto-basso, potreste comprarvi un raddrizzatore (come quello incorporato nell'oculare da 20mm) ma così facendo perdereste luce poichè aggiungereste un sistema di specchi o un prisma e questo si che viene considerato un difetto. Avendo alcuni oculari compresa una Barlow 2x Celestron Omni non ho avuto nessun problema e vi consiglio caldamente di procuravi una Barlow se non volete vedere puntini o poco più. Un riflettore decente ad un prezzo ottimo se preso sotto i 200euro, certo hanno risparmiato sullo specchio primario che non è parabolico bensì sferico come precisato nella scheda del prodotto alla voce "support" sul sito Celestron ma per comprarvi un modello analogo dotato di specchio parabolico spendereste quasi il doppio, il lato negativo è che questo specchio perde luce e potrebbe introdurre un pochino di aberrazione sferica. Il trepiedi EQ2 è abbastanza stabile se lo montate bene e con i pesi ben distribuiti, unico vero neo il distanziatore in plastica non mi fa sentire sicuro quindi siate delicati quando lo aprite o lo chiudete . Un consiglio, io uso il telescopio seduto su uno sgabello regolabile quindi non ho bisogno di estendere i tubi telescopici rendendo il trepiedi estremamente stabile, Eq2 base ma fa il suo lavoro. Qualcuno ha lamentato problemi di collisioni delle manopole o col motore, beh questo succede solo se montate male il trepiedi oppure se pensate di utilizzarlo come se fosse un trepiedi azimutale, con l'equatoriale vi bastano piccoli movimenti per alzare o "girare" il tubo e se tocca qualche manopola è perchè lo state usando male. Aggiornamento: Ho avuto l'astromaster 130 per un'anno ora ho qualcosa di meglio come un Maksutov 127mm e posso dire questo, se preso intorno ai 180 euro va bene , ha lo specchio sferico e non parabolico e non è propio il massimo e raramente potrete apprezzare stelle puntiformi ed alto contrasto che un Maksutov è in grado di regalare, tralasciando il mediocre cercatore e sostituiti gli oculari davvero pessimi il resto potrebbe andare ma è solo questione di prezzo, se volete un riflettore cercate di prenderlo con specchio parabolico i prezzi sono decisamente scesi, i difetti che lo sferico introduce si notano eccome quando si passa a qualcosa di meglio, come primo telescopio ovviamente non si può che esserrne entusiasti ma con l'esperienza si capisce che non è granchè.

Çok iyi bir teleskop. Başlangıç için 50AZ modelini almıştım ama arasında çok fark var. Andromeda, jüpiter, saturn ve niceleri telefonumda var ama "AMAZON TÜRKİYEDE RESİMLERİ AÇSA GÖSTERECEM!" Eğer çok üst segment alıp para basmayacam diyorsanız ideal. Çok ekmeğini de yedim ürünün ;) 2 eksisi var el ile taşınmaz çok ağır. Ekstra lens alıp geliştirmek lazım. Jüpiterin 2 büyük çizgisi ve büyük kırmızı gözü lens yardımı ile gözüküyor. Ayrıca fotozeynep ile 1 günde kapınızda.

5 estrellas banda, viene completo y cuidadosamente empacado, observe júpiter por primera vez y se ve hermoso (pequeño pero hermoso) aunque mi celular no capta bien se ve muy bonito y nítido :0

Fungerade precis som jag hade förväntat mig, bra produkt

É bem preciso na busca de planetas quando se regula bem a buscadora. As lentes que vem nele é de altíssima qualidade e só fica "devendo" uma barlow para aumentar o zoom. - Antes de comprar, é importante saber a latitude e longitude da sua localidade. - Se vai comprar, compre uma barlow também. Respeitando a capacidade do telescópio - Zoom real máximo é de 260x (sem aberrações nas imagens) - Para ver a lua, fica muito bom com o filtro lunar e as lentes de 10mm e 20mm dão e sobram - A regulagem precisa é muito boa - Se for fazer imagens/vídeos, recomendo um suporte para celular ou câmera DSL