Neiko 03323A Crowfoot Wrench Set 1/2" and 3/8” Drive, 12 Piece, SAE Crows Foot Wrench Sizes 5/16” to 1”, Chrome-Moly Flare Nut Wrench Set

These saved me about $300 in a do-it-yourself project. good snug fit and strong. I find they are clearly marked, and the case is a nice feature. Easy to take out and put in case as well as easy to use. Worth much more than I paid and I would buy them again. Function better than described.

I only required one 18mm crow foot. For a clearance issue using a torque wrench replacing a shock on my car. Standard socket was too long, and couldn't turn the torque wrench in a tight spot, but this kit (18mm) got me out of a jam. I think it's more like 4-1/2 stars because there was some light rounding inside the crow foot, but the two times I used it worked, and that was 110Nm of torque using a 3/8 digital wrench.

I have no regrets of purchasing this Neiko set of Crowsfoot wrenches, they are indispensable when working in hard to access areas such as around power steering lines, brake lines and other hydraulic systems. They are durable and solid and I'm only accustomed to using Snap on, SK and professional grade tools and I highly recommend these especially for the price you won't find anything out there even close. I'd rather buy the right tool once than have a cheaper quality product fail when I need it the most and lose time and money in the interim. Set provides great size coverage and the case is nice too but kind of bulky. May have to ditch the plastic case when I start running out of room in my tool locker. My first purchase of a Neiko tool product and it won't be my last as they've shown they can make decent tools for a reasonable price.

This is a terrific array of metric sizes including the difficult to find large ones, at a great price. A crowfoot wrench is sometimes the only practical generic tool to turn certain hex heads because of their location. Some, like these, have return tabs at the jaws to contact with all points of a hex nut or bolt, but these require an access in order to slip the tool over then slide onto the hex head. Others don't have the returns -- have open jaws -- so can slide right onto the hex (or older square head). I would have preferred open jaws for my application but could not find a cost effective set with the larger sizes. This one worked, but with more awkwardness getting the tool on the hex head for each small turn I could get. Return tab jaws provide better leverage or less chance of slipping off or rounding edges where hex head access is not an issue. As others have commented, the drawback of this set is that its grip on the ratchet drive or extension is tentative. In my case I immediately deployed the 24mm crowfoot with 1/2" drive to a very tight spot with limited space for the swing of the crowfoot, and the crowfoot promptly fell into the engine (and didn't hit ground). This resulted in a 40 minute find and retrieval process. The crowfoot and ratchet drive then had to be held two handed to avoid a repeat of the problem yet allow repeated repositioning of the crowfoot -- using a wobble head extension improved the grip, but it was still dicey.

These are a nice set but unfortunately I needed open crows feet and I have to return them. The thing I liked are the five sides that fit snug and secure so you don’t round off of a hard to reach nut.

Great product for a good price

This set of crowfoot came with a blow molded case which I quickly discarded and threw them all on a socket rail which worked great for organizing in the tool box. This set goes from 24mm down to 7mm (skips 23mm, 20mm). The thickness on these is enough so when they have lots of torque on them, the ears don't bend or break off. The 24,22 and 21mm are all 1/2-inch drive, while the rest are 3/8 inch drive. Overall, I have been very happy with this set and should last a very long time. Would recommend! Pros: - Thickness helps prevent any adapters from breaking pieces off - Cr-Mo high strength steel - Sizes are all well within spec - Great mat black finish with sizes laser etched into each - Organize very well on a socket rail Cons: - A few useful sizes skipped (23,20) - Could be more useful if they were all the same size drive

So I wanted to change my fuel filter and the open end wrenches were beginning o strip the b-nut. Then remembering my time in the Air Force, all B-nuts that we removed we always used Flare Nut removers and so I bought this one. When buying tools one must really know the measurements as some tool kits will purposely leave out one or two and believe me, it is the one you need that they left out. So check out the kits that are thinking about and make sure they don't skip sizes. This kit is good, but it does skip one. 20mm and 23mm and maybe those are not common, but still there will be that one day. But in my opinion this kit is pretty complete compared to others out there. The case is your typical plastic, but being red in color makes sure you see it. The tools them selves are really strong. I got my filter off and they were just great and did not strip the B-nut. Putting the tubing back on once I added the new filter was a breeze. So this tool kit is one of the most complete kits out there. It is missing 2, but it is pretty complete; especially at the low numbering range.

Produto de excelente qualidade. Recomendo muito a compra.

Exactly same as store stock I viewed prior to ordering through Amazon, though the store products were $130 more. Right down to the stickers were identical on the casing. Only used once so far, but performed perfectly as expected.

Product arrived without damages. The box looks good and sturdy. Have not used them yet though

Looks sold and I didn’t have time to use them yet

Very Good!!!