90 x 45cm Rectangle Bathroom Mirror with Drilled Holes & Chrome Cap Wall Hanging Fixing Kit

The mirror was a direct replacement for an old one and it fitted perfectly as the dimensions and screw holes are very accurate. It was very well packed and comes with screws and screw covers to hide the top of the screws. Great price too. A great choice for a bathroom mirror.

Good quality mirror at a good price, well packaged and with all the required fixings.Delivered quickly.

This mirror is made of real glass and arrived unharmed in exceptionally protective packaging.I wanted a simple uncluttered design and that is exactly what it is. - there is no frame or bevels, just ground glass edges to prevent them from being dangerously sharp.The mirror attaches to the wall using screws, bushes and plugs that are supplied with it - they are taped to the back if, like me, you have trouble finding them. These items let down the kit. Firstly the wall plugs are only suitable for masonry so if you intend fastening this to plater-board you will have to find your own fixings. Secondly the screws are rubbish. They have cross heads, but none of my Phillips or Pozidriv screwdrivers would fit without camming out of the slot - I tried a lot different sizes, different makes and different degrees of wear non worked. It is important that you have complete control over the screwdriver when torquing up fittings passing through glass; you should’t have to press down hard as you turn the screw to stop the driver bouncing out of the slot. I would recommend the supplier of this mirror to ditch their stock of screws and get some replacements from a reputable manufacturer.Other than the difficulty using the screws and wall plugs the mirror went up and looks great. I did need help installing it because it is fairly heavy and you need extra hands to position it and screw it in place. The technique I used was to establish the position and fasten the mirror to the wall using one of the top holes. I then swung it to the vertical position and marked the position of the other top hole and fastened the mirror to that. The exact positions of the two bottom holes could now be marked on the wall through the mirror and by alternately removing the top screws and swinging the mirror out of the way these could be drilled and plugged. Once this was done all three remaining screws can be carefully tightened to hold the mirror flat to the wall. If your wall isn't flat you will have to arrange stand-offs to bridge any bumps that would bend the mirror, distorting the image or, worse still, cracking it - tap washers make good stand-offs.

Exactly as described

Cheap for its size, easy/ish to fit, I did it myself carefully, but should have had two people to fit while marking holes and screwing into place fear of cracking as its large and not heavy but its not light weight either.

Bought for bathroom. Easy to installJust what I wanted

I used plasterboard fixings to secure which worked well but the screw caps didn’t seem to go on afterwards probably because my screw heads swelled the plastic washers. Looks good for the price

I have it up in my dog grooming van it’s brilliant especially with the movement in my van the wet and hot and cold temperatures, very easy cleaned